Android Tutorials Unbox to App
* HDMI 1080p monitor * USB keyboard and mouse * 5V, 2A Power Supply * HDMI Cable * Monitor Power Supply | |
A close up of the power supply. | |
Unpack the Panda Board and connect the HDMI cable and the USB keyboard and mouse. | |
Optionally connect a serial-to-USB converter. | |
Connect an SD card reader | |
Insert your SD card. | |
Download a release from android-build.linaro.org. | |
The build page contains all the information necessary to program the build on an SD card. The following commands can be used to get and program a build.
wget --no-check-certificate https://android-build.linaro.org/jenkins/job/linaro-android_staging-panda-11.10-release/4/artifact/build/out/target/product/pandaboard/boot.tar.bz2 wget --no-check-certificate https://android-build.linaro.org/jenkins/job/linaro-android_staging-panda-11.10-release/4/artifact/build/out/target/product/pandaboard/system.tar.bz2 wget --no-check-certificate https://android-build.linaro.org/jenkins/job/linaro-android_staging-panda-11.10-release/4/artifact/build/out/target/product/pandaboard/userdata.tar.bz2 bzr branch lp:linaro-image-tools ./linaro-image-tools/linaro-android-media-create --mmc /dev/sdc --dev panda --system system.tar.bz2 --userdata userdata.tar.bz2 --boot boot.tar.bz2 A serial console thats logged to a file can be started to record boot: minicom -D /dev/ttyUSB0 -w -C minicom.txt | |
At the bottom of the build page is the build artifacts referenced in the instructions listed above. | |
Everything running. | |
Go to android.com and click on Developers. | |
Save android-sdk_r15-linux.tgz and untar it
tar -zxvf android-sdk_r15-linux.tgz | |
Follow the steps listed at http://developer.android.com/sdk/installing.html for installing the SDK prerequisite and configuring the SDK to point to the tools that were just downloaded. | |
Install android's SDK
Run ./android-sdk-linux/tools/android and select the things shown in the clip. | |
Open Disable Suspend. | |
Panda uses a Mini-B plug for ADB | |
Connect the Mini-B plug. |