Difference between revisions of "Armadeus APF boards"
(Add APF51) |
m (→APF51 (i.MX51 based)) |
||
Line 9: | Line 9: | ||
{| | {| | ||
− | | [[Image:apf51. | + | | [[Image:apf51.png|scale|120px]] || |
:The APF51 is a reduced size processor board fitted with a 800MHz i.MX51 processor, 64 MB to 512 MB LPDDR RAM (32 bits), 256 MB to 32 GB FLASH (NAND SLC), a 10/100Mbits Ethernet port and a Xilinx '''Spartan 6A FPGA''', it is easily integrated into an embedded system thanks notably to its PMIC and on board PHYs (Ethernet & USB). | :The APF51 is a reduced size processor board fitted with a 800MHz i.MX51 processor, 64 MB to 512 MB LPDDR RAM (32 bits), 256 MB to 32 GB FLASH (NAND SLC), a 10/100Mbits Ethernet port and a Xilinx '''Spartan 6A FPGA''', it is easily integrated into an embedded system thanks notably to its PMIC and on board PHYs (Ethernet & USB). |
Revision as of 05:42, 24 July 2014
APF boards are Systems On Module designed for embedding into project needing performances, low power and versatility. Initiated by a group of embedded systems enthusiasts as a proof of concept (ARM+FPGA combination), boards are now designed, sold and supported by the ARMadeus Systems company.
Open Source Buildroot's based BSP is maintained by ARMadeus Systems itself and boards are used by the growing Armadeus Project Community.
FPGA's IP designed for the boards support OpenCores Wishbone bus.
APF51 (i.MX51 based)
120px |
|
APF27 (i.MX27 based)
|