Difference between revisions of "Banana Pi"

From eLinux.org
Jump to: navigation, search
(Wrote first draft of page)
 
m (change formatting)
Line 1: Line 1:
 
The Banana Pi is an open source computer capable of running Linux and Android 4.4.  It has an AllWinner A20 SoC with 1GB of memory and a dual core ARM CPU.
 
The Banana Pi is an open source computer capable of running Linux and Android 4.4.  It has an AllWinner A20 SoC with 1GB of memory and a dual core ARM CPU.
  
 +
== Banana Pi Resources ==
 +
* [http://www.lemaker.org/resources/9-38/image_files.html Downloads]
 +
* [http://www.lemaker.org/resources/9-39/banana_pi_quick_start_guide.html Quickstart]
 +
* [http://banoffeepiserver.com/ Banana Pi tutorials and usage information]
  
== OS ==
+
== Banana Pi Community ==
+
* [http://forum.lemaker.org/ LeMaker's Banana Pi forum]
* Raspbian
+
* [http://wiki.lemaker.org/Main_Page Banana Pi Wiki ]
* Lubuntu
 
* OpenSuse
 
* Fedora
 
* ArchLinux
 
* Bananian
 
* Android 4.4
 
  
  
 +
== Specifications ==
 
{| class="wikitable"
 
{| class="wikitable"
 
|-
 
|-
Line 54: Line 53:
 
|}
 
|}
  
 
+
== OS Support ==
== Banana Pi Resources ==
+
* [http://www.lemaker.org/resources/9-38/image_files.html Downloads]
+
* Raspbian
* [http://www.lemaker.org/resources/9-39/banana_pi_quick_start_guide.html Quickstart]
+
* Lubuntu
* [http://banoffeepiserver.com/ Banana Pi tutorials and usage information]
+
* OpenSuse
 
+
* Fedora
== Banana Pi Community ==
+
* ArchLinux
* [http://forum.lemaker.org/ LeMaker's Banana Pi forum]
+
* Bananian
* [http://wiki.lemaker.org/Main_Page Banana Pi Wiki ]
+
* Android 4.4

Revision as of 14:14, 3 September 2014

The Banana Pi is an open source computer capable of running Linux and Android 4.4. It has an AllWinner A20 SoC with 1GB of memory and a dual core ARM CPU.

Banana Pi Resources

Banana Pi Community


Specifications

CPU A20 ARM® Cortex™-A7 Dual-Core
GPU ARM Mali400MP2 Complies with OpenGL ES 2.0/1.1
Memory (SDRAM) 1GB DDR3 (shared with GPU)
Onboard Storage SD (Max. 64GB) / MMC card slot UP to 2T on SATA disk
Onboard Network 10/100/1000 Ethernet RJ45 (optional USB WIFI Dongle)
Camera Input A CSI input connector allows for the connection of a designed camera module
Sound Input Mic
Video Outputs HDMI, CVBS , LVDS/RGB
Audio Output 3.5 mm Jack and HDMI
Power Source 5 volt via MicroUSB(DC In Only) and/or MicroUSB (OTG)
USB 2.0 Ports 2 (direct from Allwinner A20 chip)
Buttons Reset button: Next to MicroUSB connector

Power button: Next to Reset button

UBoot button (optional): Behind HDMI connector

GPIO(2X13) pin GPIO,UART,I2C bus,SPI bus with two chip selects,CAN bus,ADC,PWM,+3.3v,+5v,ground.
LED Power Status LED (Red)

Ethernet Status LED (Blue)

User Define LED (Green)

Remote IR

OS Support

  • Raspbian
  • Lubuntu
  • OpenSuse
  • Fedora
  • ArchLinux
  • Bananian
  • Android 4.4