Difference between revisions of "BeadaPanel"

From eLinux.org
Jump to: navigation, search
(First time Setup)
Line 344: Line 344:
* [http://www.nxelec.com/ Official Website]
* [http://www.nxelec.com/ Official Website]
* [[INNOSTICK6|Innostick6 Wiki]]
* [http://www.esky-sh.com/bbs Official Forum]
* [http://www.esky-sh.com/bbs Official Forum]
* [https://plus.google.com/communities/101076644884797678653 Google+]
* [https://plus.google.com/communities/101076644884797678653 Google+]

Revision as of 06:21, 23 May 2019

BeadaPanel 1
BeadaPanel 2

What is BeadaPanel?

BeadaPanel is a versatile media display. It can playback images and videos in various common format. BeadaPanel comes with a 7" LCD display with a resolution of 800x480 and a 4-wire resistive touch panel. BeadaPanel has up to 16GB/32GB eMMC memory for media storage and playback. BeadaPanel supports USB 2.0 High Speed standard and WiFi communication. BeadaPanel consumes very low power and can be powered by a single Micro-USB cable. BeadaPanel comes with its own ABS bezel, which is easy to integrate into customer products.



NXP/Freescale ARM Cortex-A7 i.MX6ULL, at Frequency of 900MHz




16GB/32GB eMMC


  • 1 x WIFI 802.11 b/g/n and Bluetooth 4.0 module
  • 1 x USB 2.0 Host(Type A)
  • 1 x USB 2.0 OTG(Micro-USB)


7.0" TFT LCD: 800x480, w/ touch and bezel


188 x 118 x 35(mm)



Block Diagram

BeadaPanel Block Diagram


BeadaPanel for Raspberry Pi

In this application, BeadaPanel is used as a monitor/display for Raspberry Pi mini PC.

Supported Models and OS

Communication Protocol

Panel-Link v1.0

Supported Media Types

  • JPG, BMP, PNG, GIF, TIFF, etc
  • MPG2, MPG4, avi, quicktime, H.263/264/265
  • RGB in various pack
  • YUV in various pack

Supported Model

Raspberry Pi A/B/B+/Zero/Zero W/2B/3B/3B+

OS Support

  • Raspbian
  • RetroPie
  • Ubuntu MATE
  • Ubuntu Core
  • CentOS
  • Kali Linux

First time Setup

BeadaPanel will not work automatically when first time plugin to Raspberry Pi. Instead, A beadapanel deamon program should be running on Raspberry Pi to handle the data transmit between two USB peers. Below are procedures to setup this beadapanel deamon.

  • A Raspberry Pi mini PC
  • A BeadaPanel display kit

1. Power on your Raspberry Pi mini PC
2. Connect BeadaPanel to Raspberry Pi by a Micro USB cable
3. BeadaPanel will be automaticaly recognized as a USB mass storage device by Raspberry Pi

pi@raspberrypi:~ $ lsblk
sda           8:0    0  9.1G  0 disk
├─sda1        8:1    0 43.9M  0 part /media/pi/boot
└─sda2        8:2    0  4.9G  0 part /media/pi/rootfs
mmcblk0     179:0    0  7.4G  0 disk
├─mmcblk0p1 179:1    0 43.9M  0 part /boot
└─mmcblk0p2 179:2    0  7.4G  0 part /
pi@raspberrypi:~ $ ls /media/pi/boot/bpd

4. Locate and run beadapanel deamon in /media/pi/boot/bpd folder

pi@raspberrypi:~ $ sudo cp /media/pi/boot/bpd/bpd /usr/bin 
pi@raspberrypi:~ $ sudo chmod +x /usr/bin/bpd
pi@raspberrypi:~ $ sudo bpd
BeadaPanel Daemon Ver. 1.0

5. Run beadapanel deamon from booting

$ sudo nano /etc/rc.local -> add new line before "exit 0" with "/usr/bin/bpd &" without quote 
$ sudo reboot

Force Raspberry Pi display through HDMI

In order to let beadapanel deamon transmit HDMI video data to BeadaPanel, we have to force Raspberry Pi HDMI port work even if no HDMI monitor connected.


1. To solve the problem, simply connect to your Raspberry Pi via SSH and modify with your favorite text editor (here we will use nano) the file /boot/config.txt.

2. Note that you will need administrator rights and therefore sudo command (with nano this will give for example sudo nano /boot/config.txt).

3. You should then find within this file the following line (if not, add it at the end):


4. To solve the problem you just have to uncomment (ie remove the sign # at the beginning) the line and save the file (Ctrl + o, Enter, Ctrl + x with nano). Restart your Raspberry Pi and you're done!
5. Further more, for best video performance and experience, we'd better to set Raspberry Pi HDMI port work under same resolution with BeadaPanel's native screen.

hdmi_cvt=800 480 60 6 0 0 0

BeadaPanel for AIDA64

BeadaPanel for NVIDIA Jetson Dev. Board

In this application, BeadaPanel is used as an USB LCD Display + WiFi + Storage 3-IN-1 Companion Kit for NVIDIA Jetson Nano/Xavier/TX1/TX2 Board.

Supported Models and OS

Communication Protocol

  • USB Mass Storage Gadget

Supported Model

Jetson Nano/Xavier/TX1/TX2

OS Support

Ubuntu 18.04LTS

First time Setup

BeadaPanel has a resident VNC Viewer to connect to Jetson Dev. board as a remote desktop display. Below are procedures to setup VNC server on Jetson Dev. board side.

  • A NVIDIA Jetson Dev. board(Ubuntu 18.04LTS pre-loaded)
  • A HDMI/DP screen
  • A BeadaPanel display kit
  • USB keyboard and USB mouse

1. Connect NVIDIA Jetson board with a HDMI/DP screen
2. Connect NVIDIA Jetson board with USB keyboard and USB mouse
3. Power on Jetson board
4. Login to Ubuntu desktop
5. Setup automatic login to current user

6. Configure Vino VNC Server

jetson@jetson-desktop:~$ gsettings set org.gnome.Vino prompt-enabled false
jetson@jetson-desktop:~$ gsettings set org.gnome.Vino require-encryption false
jetson@jetson-desktop:~$ gsettings set org.gnome.Vino authentication-methods "['none']"

7. Verify config results in step 5

jetson@jetson-desktop:~$ gsettings list-recursively org.gnome.Vino
org.gnome.Vino notify-on-connect false
org.gnome.Vino alternative-port uint16 5900
org.gnome.Vino disable-background false
org.gnome.Vino use-alternative-port false
org.gnome.Vino icon-visibility 'client'
org.gnome.Vino use-upnp false
org.gnome.Vino view-only false
org.gnome.Vino prompt-enabled false
org.gnome.Vino disable-xdamage false
org.gnome.Vino authentication-methods ['none']
org.gnome.Vino network-interface ''
org.gnome.Vino require-encryption false
org.gnome.Vino mailto ''
org.gnome.Vino lock-screen-on-disconnect false
org.gnome.Vino vnc-password 'amV0c29u'

8. Click on Startup Applications

9. Add vino-server to Desktop Startup Applications

10. Click Shutdown to power off NVIDIA Jetson board

11. Disconnect HDMI/DP screen
12. Connect BeadaPanel USB screen with Micro USB cable
13. Power on NVIDIA Jetson board
NVIDIA Jetson board will automatically recognize BeadaPanel as a VNC Viewer and display to it as soon as Ubuntu desktop launches.

Connect to WiFi Hostspot

  • A NVIDIA Jetson Dev. board(Ubuntu 18.04LTS pre-loaded)
  • A BeadaPanel display kit
  • USB keyboard and USB mouse

1. Connect NVIDIA Jetson board to BeadaPanel with a Micro USB cable
2. Connect NVIDIA Jetson board to USB Keyboard and USB Mouse
3. Power on Jetson board
4. Open a Terminal on Ubuntu desktop as soon as Jetson board boot up
5. ssh to BeadaPanel

jetson@jetson-desktop:~$ ssh debian@
debian@'s password:

In this case, password is 'temppwd'
6. Open Connection Manager on BeadaPanel

debian@arm:~$ sudo connmanctl
[sudo] password for debian:

7. Scan current services

connmanctl> scan wifi
Scan completed for wifi
connmanctl> services
*AR Wired                gadget_46103ab3afd9_usb
    Paulin               wifi_00904c112233_5061756c696e_managed_psk

8. Connect to your favorite hotspot

connmanctl> agent on
Agent registered
connmanctl> connect  wifi_00904c112233_5061756c696e_managed_psk
Agent RequestInput wifi_00904c112233_5061756c696e_managed_psk
  Passphrase = [ Type=psk, Requirement=mandatory ]
Connected wifi_00904c112233_5061756c696e_managed_psk
connmanctl> services
*AO Paulin               wifi_00904c112233_5061756c696e_managed_psk
*AR Wired                gadget_46103ab3afd9_usb

9. Exit ssh session

connmanctl> quit
debian@arm:~$ exit
Connection to closed.

Buy online