Difference between revisions of "BeagleBoard/GSoC/2019Proposal/PRUUserSpaceAPI-PratimUgale"

From eLinux.org
Jump to: navigation, search
Line 140: Line 140:
*It will print the reg_values of the current step and the previous step and highlight the ones whose values have changed for better readability.
*It will print the reg_values of the current step and the previous step and highlight the ones whose values have changed for better readability.
;Week 10 (29th July - 4th August):  
;Week 10 (29th July - 4th August):  
*Port some legacy PASM projects into the Remoteproc framework. I'll be using [https://github.com/MarkAYoder/PRUCookbook/blob/master/docs/06io/io.adoc Mark Yoder's website], [http://processors.wiki.ti.com/index.php/PRU_Assembly_Instructions#pasm_vs._clpru this site] as references. <br>
*Port some legacy PASM projects into the Remoteproc framework using clpru. I'll be using [https://github.com/MarkAYoder/PRUCookbook/blob/master/docs/06io/io.adoc Mark Yoder's website], [http://processors.wiki.ti.com/index.php/PRU_Assembly_Instructions#pasm_vs._clpru this site] as references. <br>
*The PASM examples will be from [https://github.com/beagleboard/am335x_pru_package/tree/master/pru_sw am335x_pru_package] will be ported.  
*The PASM examples will be from [https://github.com/beagleboard/am335x_pru_package/tree/master/pru_sw am335x_pru_package] will be ported.  
*Use the API to test these new projects.<br>
*Use the API to test these new projects.<br>

Revision as of 19:31, 3 April 2019

Proposal for PRU User Space API project


This project aims to provide an API for different programming languages to load/unload firmware and communicate with the PRUs from User Space.

Student: Pratim Ugale
Possible Mentors: Kumar Abhishek, Zubeen Tolani
Wiki: https://elinux.org/BeagleBoard/GSoC/Ideas#PRU_User_Space_API
GSoC: GSoC entry


This project is currently just a proposal.


I have completed the requirements listed on the ideas page and have opened a pull request here.

About you

IRC: pratimugale
Github: Pratim Ugale
School: Veermata Jijabai Technological Institute (VJTI), Mumbai
Country: India
Primary language: English
Typical work hours: 08:00 to 21:00 IST (GMT+ 05:30)
Previous GSoC participation: I haven't participated in GSoC before. Having used open source technologies and programming forums before to solve my problems, I want to start contributing back to the community through GSoC and then continue on my own.

About your project

Project name: PRU User Space API


This project will enable the control of the Beaglebone's PRUs from a User Space Client Program on the ARM. The PRU is a dual core micro-controller system present on the AM335x SoC (TI's ARM A8 based chip) which powers the BeagleBone. It is meant to be used for high speed jitter free IO control. Being independent from the linux scheduler and having direct access to the IO pins of the BeagleBone Black, the PRU is ideal for offloading IO intensive tasks.
  • The User Space Client Program must be able to
    • Load firmware into the PRU cores
    • Control PRU execution (start, stop, etc.)
    • Manage resources (memory, interrupt mappings, etc.)
    • Have a method to send/receive messages
The new Remoteproc and RPMsg drivers will be used for the ARM<->PRU communication.
  • The remoteproc framework allows different platforms/architectures to control (power on, load firmware, power off) remote processors while abstracting any hardware differences.
  • A scalable TLV (table, length, value) Table (Resource Table) is used to inform the remoteproc driver about the remote processor’s available resources. To configure the Resource Table, one typically needs to modify up to three things.
    • Event-to-channel mapping
    • Channel-to-host mapping
    • Number and location of vrings
  • The Linker Command File - AM335x_PRU.cmd: Tells the linker where in memory to place the code and variables.
    AM335x_PRU.cmd is the standard linker command file that tells the linker where to put what.
  • Rpmsg is a Linux framework designed to allow for message passing between the kernel and a remote processor. It uses a virtual ring buffer (VRING) that allows one to post messages to this buffer. Then, interrupts are used to notify the PRU/ARM that messages are in the buffer. RPMsg provides scalability for integrating individual PRU peripherals with the respective driver sub-systems.
The Project

The workflow of the project is:
UserSpace Client Program <-> API (UNIX Sockets / Language Bindings) <-> Daemon <-> pru_rproc, rpmsg_pru <-> Remoteproc, RPMsg drivers <-> PRU

The PRU attributes and its functions will be encapsulated into a single unit.

The functions provided by the Daemon will be:

  • disableHdmi()  : Checks if HDMI cape is disabled. If not, disable it by uncommenting "dtb=am335x-boneblack-emmc-overlay.dtb" from ‘/boot/uEnv.txt’ file
    On the images for the BeagleBone Black, the HDMI display driver is enabled by default and uses many of the P8 pins.
  • check_module()  : Check if remoteproc is enabled using "lsmod | grep pru".
    If not, enable remoteproc by editing the device tree.
    #include "am33xx-pruss-rproc.dtsi" from the "am335x-boneblack-emmc-overlay.dts" file in "/opt/source/dtb-4.4-ti"
    This will involve using a bit of regular expressions.
  • make(parameters)  : To compile using compiler (clpru) and linker (lnkpru) tools.
    This will perform all the operations specified in the Makefile so that the Makefile can be omitted.
  • reboot()  : Reboots the PRU cores. After the firmwares are /lib/firmware/am335x-pru1(0)-fw is present, rebooting the PRU cores automatically loads the PRU with these firmwares. The sysfs bindings at the ‘/sys/bus/platform/drivers/pru-rproc/’ are to be used to reboot the PRUs
  • configPinMux():  : Config-pin utility - Simply use the ‘config-pin’ utility to change the pinmux settings for a pin. (We do not need device tree overlays now (4.4+ kernel))
  • shutdown(int core)  : Shuts the PRU core provided in the parameter ("echo "4a334000.pru0" > /sys/bus/platform/drivers/pru-rproc/unbind" for PRU 0)
  • boot(int core)  : Boots the PRU core provided in the parameter ("echo "4a334000.pru0" > /sys/bus/platform/drivers/pru-rproc/bind" for PRU 0)
  • reboot(int core)  : To shutdown and boot the PRU core
  • writemsg(), readmsg() using "/dev/rpmsg_pru30" and "/dev/rpmsg_pru31"  : Read/Write message to PRU

PRU Debugging Functions: Using Remoteproc, we can actually see the content of the PRU registers; we can execute one instruction at a time on the PRU, and then wait for the user for a flag to execute the next instruction. We will implement the following functions using the pru_rproc driver:

  • reg_values(int core): The values of the 32 General Purpose Registers of the PRU passed will be shown.
    After disabling the PRUs, the 'regs' entry can be read to read the register content values.
    Will also display the values of the control/status registers, and the contents of the constant table.
    For PRU1 :- "cat /sys/kernel/debug/remoteproc/remoteproc1/regs"
    REG31 is the PRU Event/Status Register (r31). When reading from REG31, it provides the state of the enhanced GPIO inputs.
    REG30 is used by the PRU to set enhanced GPIO outputs.
  • debug_pause(int core): This will change the mode of the PRUs to single_step mode. PRU executes one instruction and then gets paused.
    For PRU0 :- "echo 1 > /sys/kernel/debug/remoteproc/remoteproc0/single_step"
  • debug_nextStep(int core): Execute one next step each time invoked.
    For PRU0 :- "echo 1 > /sys/kernel/debug/remoteproc/remoteproc0/single_step"
  • debug_resume(int core): Internally this will bring back the PRU to continuous mode of operation.
    For PRU0 :-"echo 0 > /sys/kernel/debug/remoteproc/remoteproc0/single_step"
    dmesg -Hw can also be used for debugging

Documentation: This is one of the most important aspects of the project. Currently, the documentation regarding the PRU remoteproc and RPMsg drivers is scattered and incomplete. Also, there is a steep learning curve to program the PRUs. I plan to provide an exhaustive Documentation along with hands-on examples so that one can utilize the PRU to its full capacity.

Examples: The PRU Cookbook examples will be used as test examples as illustrated in the timeline below.

GUI for Debugging


Provide a development timeline with a milestone each of the 11 weeks. (A realistic timeline is critical to our selection process.)

Community Bonding Period(6th May - 26th May)
  • Unavailable until 15th May due to End Semester Examinations(Will try my best to participate in community bonding.)
  • Learn Rust and Node.js (How to create libraries)(Won't take me much time as I have already started working on it.)
Week 1 (27th May - 2nd June)
  • Start implementing disableHdmi(), check_module(), make(), reboot(), configPinMux(), shutDown(), boot(), reboot() functions in Python
  • Test the Blinky example given here which requires loading firmware, configuring pinmux and rebooting the PRU cores.
Week 2, 3 (3rd June - 16th June)
  • Make the Daemon (in python) that will listen to requests on UNIX sockets.
  • Create a standardized format in which the Daemon should receive requests.
  • Write the code that calls the functions created above according to the request.
  • Make the Introductory Youtube Video
Week 4 (17th June - 23rd June)
  • Create the API libraries for Java, C, C++ that the User Space Client Program will use to interact with the daemon.
  • Test the above with examples.

At the end of Phase 1, I must complete the Daemon and API for atleast three languages.

Week 5, 6 (24th June - 7th July)
  • Add the PRU debugging functions: reg_values(), debug_pause(), debug_nextStep(), debug_resume().
  • Test the debugging functions.
  • Add the rpmsg functions.
  • Complete the API for Java, C and C++.
Week 7, 8 (8st July - 21st July)
  • Write API libraries for Rust, Node.js and Ruby for all functions.
  • Test with examples.
Week 9 (22nd July - 28th July)
  • Make a PRUDebugger GUI application that implements debug_pause(), debug_nextStep(), debug_resume() and reg_values() functions.
  • It will print the reg_values of the current step and the previous step and highlight the ones whose values have changed for better readability.
Week 10 (29th July - 4th August)
  • Port some legacy PASM projects into the Remoteproc framework using clpru. I'll be using Mark Yoder's website, this site as references.
  • The PASM examples will be from am335x_pru_package will be ported.
  • Use the API to test these new projects.
Week 11 (5th August - 11th August)
  • Documentation for all the languages along with examples.
  • The Documentation will also contain the errors one might expect while working with the PRU and how to resolve them.
Week 12 (12th August - 18th August)
  • Buffer Period in case of any disturbance in the timeline.
  • Make the Completion Youtube Video.
  • Add support for more programming languages.

Experience and approach

I am in my sophomore year of engineering, doing Information Technology. I am currently enrolled in a "Computer Organisation and Architecture" course which motivated me to learn more about the PRUs. I have worked with C, Python, Java, C++, Makefiles, Vimscript before.
I have learnt Linux driver development over the Internet in the past few months (I have implemented basic programs, and listed the errors I encountered on my github profile here).
I have worked with the Arduino UNO and ATMega boards before (made a self balancing and line following bot using PID algorithm in college).
I have always been using Linux(Ubuntu) as my primary OS, so getting along with Embedded Linux won't be a problem.
I have thoroughly been through the PRU Cookbook and zeekhuge's website and the resources I found there have been invaluable.
Hence, I am confident that I'll be able to complete the given project in due time.


What will you do if you get stuck on your project and your mentor isn’t around?

While working with open source software, one thing I realised for sure is that one has to be self-sufficient. Knowing how to use a search engine effectively is also an important skill. I like to give my best before asking anyone else for help when I’m stuck with any problem and I consider it to be a way I actually learn and become independent.

However, if I get terribly stuck on a problem, and the mentor isn't around, I shall:


If successfully completed, what will its impact be on the BeagleBoard.org community?

This project will allow larger programs to be developed in the programming language of the user's choice. Right now one has to manually load the firmware and execute long commands to get things done. The API will provide simple and intuitive functions so that the user can easily read values from the PRU and use them for his/her other needs directly from the program itself.

   Mar 08 05:03:15 <zeekhuge[m]>: 
   To make it easy to use interface and standards for the PRU. 
   Right now, we have to execute commands to get some code loaded onto the PRUs, by echoing into the sysfs entries.
   Also, the remoteproc mechanism allows to communicate with the PRUs using char device entries (mostly, and can be configured). 
   The APIs need to provide a way, in different languages, to be able to read and write message to and from the PRUs within the program itself.
                 Zubeen Tolani(zeekhuge)

Benefit of using Remoteproc :- The UIO is just like random memory access while Remoteproc is more systematic and very well supported by the kernel and can be used to allow PRUs to use other resources as well like DMA access. Also, using Remoteproc, PRUs can act as different hardware devices (implemented by code on the PRU). For example, if the firmware on PRU can read/write data using SPI interface, then using Remoteproc, PRUs can act as if it was a SPI device itself, and the SPI system will just work with it.

Future Work

  • In the future, the project will be expanded to support many more programming languages.
  • The Documentation will always be updated to use the newest methods that are developed.


Is there anything else we should have asked you?