BeagleBoard/GSoC/2021 Proposal/beagle config
Contents
- 1 Proposal for Beagle Config
- 2 Status
- 3 Proposal
- 4 About Your Project
- 4.1 Description
- 4.2 Implementation Details
- 4.3 Host
- 4.4 User (Board)
- 4.4.1 System Options
- 4.4.1.1 PRU enable/disable
- 4.4.1.2 GPIO configuration
- 4.4.1.3 Internet Sharing and Client Configurations
- 4.4.1.4 eMMC stats
- 4.4.1.5 Freeze Packages
- 4.4.1.6 Wireless Configurations
- 4.4.1.7 Sensor Stats and Configurations
- 4.4.1.8 Password
- 4.4.1.9 Boot / Auto login
- 4.4.1.10 User LED
- 4.4.1.11 Firmware Update
- 4.4.2 Display Options
- 4.4.3 Interfacing Options
- 4.4.1 System Options
- 4.5 Timeline
- 4.6 Misc
- 4.7 Future Work
Proposal for Beagle Config
- Student: Shreyas Atre
- Mentors: Kumar Abhishek (IRC: Abhishek_ )
- Code: [N/A]
- Proposal : https://elinux.org/index.php?title=BeagleBoard/GSoC/2021_Proposal/beagle_config
- Wiki: [N/A]
- GSoC: [N/A]
Status
- Pre-application phase
Proposal
- Completed all the general requirements
- Completed "Hello Wolrd" of cross-compilation mentioned in the requirements list.
- Sent a PR to the mentioned upstream #145
About You
- IRC: satacker (@satacker:matrix.org)
- Github: https://github.com/SAtacker/
- School: Veermata Jijabai Technological Institute (VJTI)
- Country: India
- Primary language: English, Hindi, Marathi
- Typical work hours: 10 AM - 7 PM Indian Standard Time
- Experience :
- PID-Tuning-GUI is my Graphing Qt application as well as for sending data to esp32 microcontroller using Boost.ASIO as Networking stack in order to configure the Proportional-Integral-Derivative (PID) Controller.
- kernel learn is a repo I had created for kernel learning purposes in which I had learned Kernel module development Basics.
- I have realized the beauty of embedded systems after working on esp32 dev board and reading Exploring Linux with Beaglebone by Derek Molloy while in Society of Robotics and Automation as a core team member.
- This is the first time I am participating in GSoC
About Your Project
- Project name: Beagle Config
Description
- As we all know, nearly all of the user operations in Linux can be done using shell commands, scripts, and Linux Userspace API for advanced users. But all that being said for an average user and sometimes in production, these steps can be repetitive and time-consuming. For example- Simply sharing a network i.e. editing iptables and enabling forwarding on the host pc is an uphill task without a script provided. However running scripts could be dangerous. This explains that using a compiled program instead can implement safe and proper security.
- Enabling the PRU and loading the firmware is much daunting and unless anybody goes through their usage Documentations it will be difficult.
- Hence I propose beagle-config which is a terminal-based UI application that brings down the steep curve and enables anybody to config their beagle device as they wish. Also, a host-side application to enable ICS
- Not only does it makes beagle devices more friendly but provides an edge to beagle devices over other similar platforms.
- Also while configuring sometimes if the script has hard-coded values it makes it difficult for the user to go back to default configurations. With beagle-config that won't be a problem anymore. Beagle-Config will store the defaults at /usr/local/share/ and user configurations in /home/user/.config/beagle-config/Backups/config.json . This ensures portability and helps in reverting to defaults in case settings are unwanted.
- Goal: Beagle-Config aims to provide the functionality to make the most common low-level configuration changes in beagle devices easily and providing a terminal UI to do the same as well as a host-side application for ICS
Implementation Details
- Beagle-Config consists of a host-side application developed with cross-platform framework Qt.
Reason to choose Qt: It seems that Qt satisfies the objectives which are Good Documentations, Fewer dependencies, and as for deployment electron is easier but Qt is not much difficult. This isn't performance-critical right now but if in the future it adds some performance-critical activity then Qt would be great here.
- Beagle-Config on user (board) side which will use bash, C/C++ as back end for low-level access to linux's userspace API and FTXUI for frontend.
Comparision of a few text-based GUI
Name | Description |
---|---|
ink |
|
terminal-kit |
|
tvision |
|
blessed contrib |
|
urwid |
|
FXTUI |
|
This wasn't a detailed review but definitely, I would choose FXTUI despite its newness, I feel it has all that I need and doesn't involve dependencies while providing a DOM manip. functional style like react.
- All the configuration options are stored in the user's home directory inside /home/user/.config/beagle-config/Backups/config.json
- A restore to defaults option
Host
- Internet Connection Sharing Enabling in Linux as well as windows
- console for SSH within the application
User (Board)
System Options
The system options sub-menu allows you to make configuration changes to various parts of the boot, login, and networking process, along with some other system-level changes.
PRU enable/disable
This will enable hobbyists to enable/disable their PRUs (/var/lib/cloud9/common/Makefile TARGET=gpio.prux start) and if they want to test their PRU code in c or in simppru (Checks and asks if they want to install). Example -
PRU Conf PRU 1 Enable Disable PRU 2 Enable Disable
Recipe Outline -
- It will essentially be a wrapper around make targets (clpru and lnkpru ,the PRU compiler and linker are already installed on the standard images.)
- The PRUs appear in the Linux file space at /sys/devices/platform/ocp/4a32600*.pruss-soc-bus/4a300000.pruss
Note: If it comes out that the addresses are not fixed I would have to traverse through the ocp node until I discover "pruss-soc-bus"
- Select .out file and copy to /sys/devices/platform/ocp/4a32600*.pruss-soc-bus/4a300000.pruss/lib/firmware/am335x-pruX-fw (X=0,1)
GPIO configuration
Enabling a GPIO pin for input/output using config-pin Example -
GPIO 18 - Enable Disable Set Value
Recipe Outline -
- Now there's config-pin .
- Also traversing through /sys/class/gpio is an option
Internet Sharing and Client Configurations
Enables users to share their host internet with a click Example -
Host Host A Enable Internet Advanced Set IP gateway Return to Defaults Host Name BBB Edit Country Code <Select Menu>
Recipe Outline -
- Ask for sudo password
- Add routes for default gateways
- Add nameservers IP addresses
On host side -
- If linux then configure USB Ethernet with default IP address iptables Forwarding,
eMMC stats
Enables users to extend the sd card partition size if available Example -
eMMC Storage Total 52 % Free -------- Extend --------
Freeze Packages
apt-mark hold <package> and make a note of it in JSON
Wireless Configurations
For wireless-enabled devices like beaglebone black wireless configuring Access Point names, mDNS configurations, etc
Sensor Stats and Configurations
If beagle bone has onboard sensors then enabling them, viewing stats For ex. on Beaglebone Blue 9-axis IMU, barometer, thermometer, and a balancing LiPo charger are present
Password
Configure passwords along with the addition of users, groups
Boot / Auto login
We can configure whether to boot in desktop mode or using just console enabled. Add option to login automatically.
User LED
Configure the USR LEDs on the board. Their frequency and events.
Firmware Update
Firmware - apt update and upgrade to update your system,
Display Options
Resolution
Enable configuration of HDMI/DVI if the board supports it
Interfacing Options
Cape Configurations
Performs apt install bb-cape-overlays If a beagle board and its associated cape need a configuration, this can be configured here easily.
SSH
Configure ssh, enable/disable, and setup password
Provide an easy interface to manage uboot overlays
U-Boot /boot/uEnv.txt configuration in /boot/uEnv.txt:
enable_uboot_overlays=1 To Disable eMMC: disable_uboot_overlay_emmc To Disable HDMI VIDEO & AUDIO: disable_uboot_overlay_video disable_uboot_overlay_audio disable_uboot_overlay_wireless disable_uboot_overlay_adc
Overlay File System
Enable or disable a read-only file system
Timezone
Select your local time zone, starting with the region, e.g. India, then selecting a city, e.g. Mumbai. Type a letter to skip down the list to that point in the alphabet.
Update
Update Beagle-Config
About
Show strings, license, author, version name, and kernel version
Timeline
Date | Status | Details |
---|---|---|
13/04/2021 to 17/05/2021 | Application Review Period | Right After submitting the application I will go through a rigorous set of reference materials |
17/05/2021 to 07/06/2021 | Community Bonding |
|
14/06/2021 | Milestone #1 |
configurations |
21/06/2021 | Milestone #2 |
configurations |
28/06/2021 | Milestone #3 |
configurations |
05/07/2021 - 10/07/2021 | Milestone #4 |
|
17/07/2021 | Milestone #5 |
configurations |
24/07/2021 | Milestone #6 |
|
31/07/2021 - 03/07/2021 | Milestone #7 |
|
10/08/2021 | Milestone #8 |
|
17/08/2021 | Milestone #9 |
|
24/08/2021 | Milestone #10 |
|
31/08/2021 | Milestone #11 | Completion of GSoC |
Experience and approach
- Previously I have worked with Qt and Boost.ASIO. PID-Tuning-GUI is an application that sends data to ESP32 microcontroller which supports WiFi connectivity. Handled Application threads and Plotting of data as well as sending user input to the microcontroller.
- kernel learn is a repository I had created for kernel learning purpose in which I had learned several Kernel Development Basics.
- I have played with Pocketbeagle for a month and learned a lot about u-boot, device trees, and Loadable Kernel Modules.
- This gives me the best of both the worlds embedded as well as a bit in the frontend (Qt).
Contingency
- There is good documentation of FXTUI and Qt
- Plenty of examples to get me through if I am stuck.
- Past experience regarding Qt and DOM manipulation combined with experience in embedded and loadable kernel module development will pay off in this duration.
Benefit
- Having a seamless one-click experience to configure is enjoyed by any user, be it production or a robotics team.
- Provides a configuration file to the users. Remembers defaults and helps in accidental modification to low-level configurations.
Quotes
Misc
- For hello_world of cross-compilation, sent a PR to the mentioned upstream #145
Future Work
- Theme options
- Flashing functionality can be added instead of making the user download a third-party application like etcher
- An IDE within the beagle-config host