Student: Harikrishnan R
Mentors: Michael Welling
This project is currently just a proposal.
School: BITS Pilani, Goa campus
Primary language: English
Typical work hours: 11:30 PM to 4.30 PM UTC
Previous GSoC participation: No previous participation.
About your project
Project name: BeagleBone based Serial Terminal Server
Task Completion: Pull request.
Often in embedded development it is valuable to have a serial terminal server which can retain a serial port connection along with buffered past I/O separate from a typical host PC, either for longer term logging of serial port data or to enable remote management of a device via serial port. Commercial units which have this capability are very expensive, with even single port serial terminal servers consting hundreds of dollars. The BeagleBone has 4 highly capable UARTs exposed besides UART0 through the cape connectors. A simple cape hardware could easily enable a BeagleBone to physically have all the interfaces needed to be a serial terminal server.
The project will have the following features:
- User connects to the terminal server over SSH
- A command line interface will allow users to configure and select the interfaces to monitor and log
- Logs will be split and archived every 24 hours
- User will be able to attach to and detach from individual serial terminal sessions, similar to tmux/screen
- User will be able to view logged data from the serial device
- A new user will be added to the BeagleBone for users to connect to
- The new user will have a custom prompt instead of bash
- termios will be used to configure serial interfaces
- Incoming data will be piped to a log file without buffering
- When a user attaches to a session, the log will be tailed to display the serial output
- Input from the user will be piped to the serial device in interactive mode
- A cron job will handle log archiving
|1||Discuss with mentor and finalise available commands/features|
|2||Enable all UARTs, write code to read from UART and log|
|3||Implement non-interactive live log display|
|4||Implement piping of stdin to uart device|
|5||Implement basic attach/detach functionality|
|6||Implement basic attach/detach functionality|
|7||Implement "configure" CLI command to configure UARTs|
|8||Add other commands for CLI|
|10||BUG fixing and documentation|
|11||BUG fixing and documentation|
|12||Package into installer|
Experience and approach
As the controls engineering lead of Hyperloop India, I have worked extensively with embedded electronics and software. One of the nodes used in the pod electronics was built around a BeagleBone with a device tree overlay for enabling DCAN1. I have also ported FreeRTOS to a RISC-V processor I helped design.
What will you do if you get stuck on your project and your mentor isn’t around?
If Michael and Stephanie are unavailable, I would try asking for help on IRC. I would also consult relevant manpages and documentation.
This project will allow users to monitor up to 4 UART devices over ethernet without having to use either an expensive serial terminal server, or an always-online computer with USB hubs and multiple USB-TTL converters.