BeagleBoard/KernelPatches
In the push to get mainline kernel support for the BeagleBoard, this is just a set of patches felt to be necessary to be cleaned-up and accepted before we can declare success that mainline Linux actually supports the BeagleBoard. The Angstrom kernel is being used as the set of minimal patches as a starting point for this list.
http://www.elinux.org/OMAP_patch_merging_process
http://cgit.openembedded.net/cgit.cgi/openembedded/tree/recipes/linux/linux_2.6.39.bb
https://patchwork.kernel.org/project/linux-omap/list/
http://www.denx.de/wiki/view/U-Boot/Patches#Patchwork_work_flow
Patch status:
- BeagleBoard support
- In mainline already
- OMAP3: beagle: add support for beagleboard xM revision C (replaced with patch from Joel)
- Unknown
- OMAP3: beagle: add support for expansionboards
- OMAP3: beagle: add MADC support
- OMAP3: beagle: add regulators for camera interface
- OMAP3: beagle: HACK! add in 1GHz OPP
- In mainline already
- 1GHz support
- Unknown
- Advanced body bias
- Userspace IR drop compensation
- Unknown
- Camera
- Unknown
- Additional sensor support
- ISP functionality
- Bayer and color-space conversion
- Unknown
- Power Management
- Sakoman patches
- In mainline already
- OMAP: DSS2: DSI: fix use_sys_clk & highfreq (b2765092aed717ef9fd14bf5f82024359aff0576)
- OMAP: DSS2: DSI: fix dsi_dump_clocks(a9a6500b718a38d4658b8a61edd8fc3aa0418b50)
- OMAP2PLUS: DSS2: Fix: Return correct lcd clock source for OMAP2/3 (89976f2990a97820b73a1768371ee505b0ffc176)
- OMAP: DSS: DSI: Fix DSI PLL power bug (c94dfe05c4b6c269e445691c1fc7a9d8679ba60f)
- OMAP: DSS2: fix panel Kconfig dependencies (2783fa849b8073b8bae38bb4f3b7fe79aa4dc40b)
- Unknown
- OMAP: DSS2: add bootarg for selecting svideo or composite for tv output (ba26db491acb2d0ee6ef6e51756e843dfd56a125)
- video: add timings for hd720
- drivers: net: smsc911x: return ENODEV if device is not found
- Revert "omap2_mcspi: Flush posted writes"
- Revert "omap_hsmmc: improve interrupt synchronisation"
- Don't turn SDIO cards off to save power. Doing so will lose all internal state in the card.
- Enable the use of SDIO card interrupts.
- soc: codecs: Enable audio capture by default for twl4030
- soc: codecs: twl4030: Turn on mic bias by default
- RTC: add support for backup battery recharge
- ARM: OMAP2: mmc-twl4030: move clock input selection prior to vcc test
- Add power-off support for the TWL4030 companion
- ARM: OMAP: Add twl4030 madc support to Overo
- Enabling Hwmon driver for twl4030-madc
- mfd: twl-core: enable madc clock
- rtc-twl: Switch to using threaded irq
- ARM: OMAP: automatically set musb mode in platform data based on CONFIG options
- omap: mmc: Adjust dto to eliminate timeout errors
- omap: Fix mtd subpage read alignment
- unionfs: Add support for unionfs 2.5.9
- omap: Change omap_device activate latency messages from pr_warning to pr_debug
- Not required for BeagleBoard-xM
- drivers: input: touchscreen: ads7846: return ENODEV if device is not found
- mtd: nand: omap2: Force all buffer reads to u32 alignment
- omap : nand : fix subpage ecc issue with prefetch
- OMAP: Overo: Add support for spidev
- omap: overo: Add opp init
- In mainline already
- USB OTG sDMA support
- procfs support porting to debugfs
- device tree support