Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
m (Debian Configuration: more kernel's...)
m (2017-01-13)
Line 70: Line 70:
 
  git clone https://github.com/RobertCNelson/armv7-multiplatform.git
 
  git clone https://github.com/RobertCNelson/armv7-multiplatform.git
 
  cd armv7-multiplatform
 
  cd armv7-multiplatform
  git checkout origin/v4.8.x -b tmp
+
  git checkout origin/v4.9.x -b tmp
 
  ./build_kernel.sh
 
  ./build_kernel.sh
 
* '''Advanced Users only''': BeagleBone/BeagleBone Black:  Kernel v4.4.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.4.y
 
* '''Advanced Users only''': BeagleBone/BeagleBone Black:  Kernel v4.4.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.4.y
Line 85: Line 85:
  
 
Image Updated:
 
Image Updated:
 +
*2017-01-13
 +
** BeagleBoard xM: v4.9.3-armv7-x4 kernel
 +
** All BeagleBone Varients: v4.4.40-ti-r80 kernel
 +
** OMAP5432 uEVM: v4.4.40-ti-r80 kernel
 +
** BeagleBoard-X15: v4.4.40-ti-r80 kernel
 
*2016-11-10
 
*2016-11-10
 
** BeagleBoard xM: v4.8.7-armv7-x4 kernel
 
** BeagleBoard xM: v4.8.7-armv7-x4 kernel
** BeagleBone White/Black/Green: v4.4.30-ti-r66 kernel
+
** All BeagleBone Varients: v4.4.30-ti-r66 kernel
 
** OMAP5432 uEVM: v4.4.30-ti-r66 kernel
 
** OMAP5432 uEVM: v4.4.30-ti-r66 kernel
 
** BeagleBoard-X15: v4.4.30-ti-r66 kernel
 
** BeagleBoard-X15: v4.4.30-ti-r66 kernel
 
*2016-10-06
 
*2016-10-06
 
** BeagleBoard xM: v4.8.0-armv7-x2 kernel
 
** BeagleBoard xM: v4.8.0-armv7-x2 kernel
** BeagleBone White/Black/Green: v4.4.23-ti-r51 kernel
+
** All BeagleBone Varients: v4.4.23-ti-r51 kernel
 
** OMAP5432 uEVM: v4.4.23-ti-r51 kernel
 
** OMAP5432 uEVM: v4.4.23-ti-r51 kernel
 
** BeagleBoard-X15: v4.4.23-ti-r51 kernel
 
** BeagleBoard-X15: v4.4.23-ti-r51 kernel
*2016-09-28
 
** BeagleBoard xM: v4.8.0-rc8-armv7-x2 kernel
 
** BeagleBone White/Black/Green: v4.4.22-ti-r48 kernel
 
** OMAP5432 uEVM: v4.4.22-ti-r48 kernel
 
** BeagleBoard-X15: v4.4.22-ti-r48 kernel
 
  
 
Services Active:
 
Services Active:
Line 110: Line 110:
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2016-11-10/elinux/debian-8.6-console-armhf-2016-11-10.tar.xz
+
  wget https://rcn-ee.com/rootfs/2017-01-13/elinux/debian-8.6-console-armhf-2017-01-13.tar.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum debian-8.6-console-armhf-2016-11-10.tar.xz
+
  sha256sum debian-8.6-console-armhf-2017-01-13.tar.xz
  36de938ed618aeb9eb6eebaad611a187d541570733e7065f36b535b21b2af28f debian-8.6-console-armhf-2016-11-10.tar.xz
+
  cda6642635dd2c13d3583f571dcf22c993c21904749e192344af824f368893b4 debian-8.6-console-armhf-2017-01-13.tar.xz
  
 
Unpack Image:
 
Unpack Image:
  tar xf debian-8.6-console-armhf-2016-11-10.tar.xz
+
  tar xf debian-8.6-console-armhf-2017-01-13.tar.xz
  cd debian-8.6-console-armhf-2016-11-10
+
  cd debian-8.6-console-armhf-2017-01-13
  
 
If you don't know the location of your SD card:
 
If you don't know the location of your SD card:
Line 151: Line 151:
 
*BeagleBoard Ax/Bx/Cx/Dx          - omap3-beagle
 
*BeagleBoard Ax/Bx/Cx/Dx          - omap3-beagle
 
*BeagleBoard xM                  - omap3-beagle-xm
 
*BeagleBoard xM                  - omap3-beagle-xm
*BeagleBone White/Black/Green    - beaglebone
+
*All BeagleBone Varients          - beaglebone
 
*OMAP5432 uEVM                    - omap5-uevm
 
*OMAP5432 uEVM                    - omap5-uevm
 
*BeagleBoard-X15                  - am57xx-beagle-x15
 
*BeagleBoard-X15                  - am57xx-beagle-x15
Line 162: Line 162:
 
  git clone https://github.com/RobertCNelson/omap-image-builder.git
 
  git clone https://github.com/RobertCNelson/omap-image-builder.git
 
  cd omap-image-builder
 
  cd omap-image-builder
  git checkout v2016.11 -b tmp
+
  git checkout v2017.01 -b tmp
  
 
Stable:
 
Stable:
Line 175: Line 175:
  
 
Image Updated:
 
Image Updated:
 +
*2017-01-13
 +
** BeagleBoard xM: v4.9.3-armv7-x4 kernel
 +
** All BeagleBone Varients: v4.4.40-ti-r80 kernel
 +
** OMAP5432 uEVM: v4.4.40-ti-r80 kernel
 +
** BeagleBoard-X15: v4.4.40-ti-r80 kernel
 
*2016-11-10
 
*2016-11-10
 
** BeagleBoard xM: v4.8.7-armv7-x4 kernel
 
** BeagleBoard xM: v4.8.7-armv7-x4 kernel
** BeagleBone White/Black/Green: v4.4.30-ti-r66 kernel
+
** All BeagleBone Varients: v4.4.30-ti-r66 kernel
 
** OMAP5432 uEVM: v4.4.30-ti-r66 kernel
 
** OMAP5432 uEVM: v4.4.30-ti-r66 kernel
 
** BeagleBoard-X15: v4.4.30-ti-r66 kernel
 
** BeagleBoard-X15: v4.4.30-ti-r66 kernel
 
*2016-10-06
 
*2016-10-06
 
** BeagleBoard xM: v4.8.0-armv7-x2 kernel
 
** BeagleBoard xM: v4.8.0-armv7-x2 kernel
** BeagleBone White/Black/Green: v4.4.23-ti-r51 kernel
+
** All BeagleBone Varients: v4.4.23-ti-r51 kernel
 
** OMAP5432 uEVM: v4.4.23-ti-r51 kernel
 
** OMAP5432 uEVM: v4.4.23-ti-r51 kernel
 
** BeagleBoard-X15: v4.4.23-ti-r51 kernel
 
** BeagleBoard-X15: v4.4.23-ti-r51 kernel
*2016-09-28
 
** BeagleBoard xM: v4.8.0-rc8-armv7-x2 kernel
 
** BeagleBone White/Black/Green: v4.4.22-ti-r48 kernel
 
** OMAP5432 uEVM: v4.4.22-ti-r48 kernel
 
** BeagleBoard-X15: v4.4.22-ti-r48 kernel
 
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2016-11-10/elinux/debian-stretch-console-armhf-2016-11-10.tar.xz
+
  wget https://rcn-ee.com/rootfs/2017-01-13/elinux/debian-stretch-console-armhf-2017-01-13.tar.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum debian-stretch-console-armhf-2016-11-10.tar.xz
+
  sha256sum debian-stretch-console-armhf-2017-01-13.tar.xz
  d6004c8ee14afbb89ce2a28bbec0c462f69d1194db677c934f26d385087d8266 debian-stretch-console-armhf-2016-11-10.tar.xz
+
  66dff071128748517dfe4ffe4da9f529b279104eb32047d55b5bee8fd00be0ab debian-stretch-console-armhf-2017-01-13.tar.xz
  
 
Unpack image:
 
Unpack image:
  tar xf debian-stretch-console-armhf-2016-11-10.tar.xz
+
  tar xf debian-stretch-console-armhf-2017-01-13.tar.xz
  cd debian-stretch-console-armhf-2016-11-10
+
  cd debian-stretch-console-armhf-2017-01-13
  
 
Then follow the directions shown above with the other images...
 
Then follow the directions shown above with the other images...
Line 206: Line 206:
 
= Flasher =
 
= Flasher =
  
== eMMC: BeagleBone Black/Green ==
+
== eMMC: All BeagleBone Varients with eMMC ==
  
 
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
 
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
Line 223: Line 223:
  
 
Image Updated:
 
Image Updated:
 +
*2017-01-13
 +
** All BeagleBone Varients with eMMC: v4.4.40-ti-r80 kernel
 
*2016-11-10
 
*2016-11-10
** BeagleBone Black/Green: v4.4.30-ti-r66 kernel
+
** All BeagleBone Varients with eMMC: v4.4.30-ti-r66 kernel
 
*2016-10-06
 
*2016-10-06
** BeagleBone Black/Green: v4.4.23-ti-r51 kernel
+
** All BeagleBone Varients with eMMC: v4.4.23-ti-r51 kernel
*2016-09-28
 
** BeagleBone Black/Green: v4.4.22-ti-r48 kernel
 
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2016-11-10/flasher/BBB-eMMC-flasher-debian-8.6-console-armhf-2016-11-10-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2017-01-13/flasher/BBB-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum BBB-eMMC-flasher-debian-8.6-console-armhf-2016-11-10-2gb*
+
  sha256sum BBB-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb*
  6e6c3adefdfa4d99206d5187996bffd3df7fec9a82cbd8adeec2094083f7cb49 BBB-eMMC-flasher-debian-8.6-console-armhf-2016-11-10-2gb.img.xz
+
  5421a6a4cd9107ef5323c91bc41cef22383a5e1c4fa7ba6c54be6373e6fdc9cf BBB-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb.img.xz
  
 
Windows/Mac/Linux gui
 
Windows/Mac/Linux gui
Line 241: Line 241:
  
 
Linux: (dd)
 
Linux: (dd)
  xzcat BBB-eMMC-flasher-debian-8.6-console-armhf-2016-11-10-2gb.img.xz | sudo dd of=/dev/sdX
+
  xzcat BBB-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX
  
 
== eMMC: BeagleBoard-X15 ==
 
== eMMC: BeagleBoard-X15 ==
Line 260: Line 260:
  
 
Image Updated:
 
Image Updated:
 +
*2017-01-13
 +
** BeagleBoard-X15: v4.4.40-ti-r80 kernel
 
*2016-11-10
 
*2016-11-10
 
** BeagleBoard-X15: v4.4.30-ti-r66 kernel
 
** BeagleBoard-X15: v4.4.30-ti-r66 kernel
 
*2016-10-06
 
*2016-10-06
 
** BeagleBoard-X15: v4.4.23-ti-r51 kernel
 
** BeagleBoard-X15: v4.4.23-ti-r51 kernel
*2016-09-28
 
** BeagleBoard-X15: v4.4.22-ti-r48 kernel
 
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2016-11-10/flasher/bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-11-10-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2017-01-13/flasher/bbx15-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-11-10-2gb*
+
  sha256sum bbx15-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb*
  1b99b87ba2bcb1dfe1bd0b52fd99e7dd929912db1b86479d8ae299cf5b7c4c88 bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-11-10-2gb.img.xz
+
  f1ff6ca3fb329dd060079f3814cfc3fa9d12f6a3cf8cc3937b4dc2318d1b60d2 bbx15-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb.img.xz
  
 
Windows/Mac/Linux gui
 
Windows/Mac/Linux gui
Line 278: Line 278:
  
 
Linux: (dd)
 
Linux: (dd)
  xzcat bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-11-10-2gb.img.xz | sudo dd of=/dev/sdX
+
  xzcat bbx15-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX
  
 
= raw microSD img =
 
= raw microSD img =
Line 296: Line 296:
  
 
Image Updated:
 
Image Updated:
 +
*2017-01-13
 +
** BeagleBoard xM: v4.9.3-armv7-x4 kernel
 
*2016-11-10
 
*2016-11-10
 
** BeagleBoard xM: v4.8.7-armv7-x4 kernel
 
** BeagleBoard xM: v4.8.7-armv7-x4 kernel
 
*2016-10-06
 
*2016-10-06
 
** BeagleBoard xM: v4.8.0-armv7-x2 kernel
 
** BeagleBoard xM: v4.8.0-armv7-x2 kernel
*2016-09-28
 
** BeagleBoard xM: v4.8.0-rc8-armv7-x2 kernel
 
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2016-11-10/microsd/bbxm-debian-8.6-console-armhf-2016-11-10-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2017-01-13/microsd/bbxm-debian-8.6-console-armhf-2017-01-13-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum bbxm-debian-8.6-console-armhf-2016-11-10-2gb*
+
  sha256sum bbxm-debian-8.6-console-armhf-2017-01-13-2gb*
  a1af427af2edbff841d6b9a98771e4d087a50d8344c865a2046a5f883d441d2a bbxm-debian-8.6-console-armhf-2016-11-10-2gb.img.xz
+
  525e09fed668831d500d9ed63beedd0d2080b6457df76000bf5bb280d1f6996a bbxm-debian-8.6-console-armhf-2017-01-13-2gb.img.xz
  
 
Windows/Mac/Linux gui
 
Windows/Mac/Linux gui
Line 314: Line 314:
  
 
Linux: (dd)
 
Linux: (dd)
  xzcat bbxm-debian-8.6-console-armhf-2016-11-10-2gb.img.xz | sudo dd of=/dev/sdX
+
  xzcat bbxm-debian-8.6-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX
  
== BeagleBone White/Black/Green ==
+
== All BeagleBone Varients ==
  
 
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
 
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
Line 330: Line 330:
  
 
Image Updated:
 
Image Updated:
 +
*2017-01-13
 +
** All BeagleBone Varients: v4.4.40-ti-r80 kernel
 
*2016-11-10
 
*2016-11-10
** BeagleBone White/Black/Green: v4.4.30-ti-r66 kernel
+
** All BeagleBone Varients: v4.4.30-ti-r66 kernel
 
*2016-10-06
 
*2016-10-06
** BeagleBone White/Black/Green: v4.4.23-ti-r51 kernel
+
** All BeagleBone Varients: v4.4.23-ti-r51 kernel
*2016-09-28
 
** BeagleBone White/Black/Green: v4.4.22-ti-r48 kernel
 
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2016-11-10/microsd/bone-debian-8.6-console-armhf-2016-11-10-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2017-01-13/microsd/bone-debian-8.6-console-armhf-2017-01-13-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum bone-debian-8.6-console-armhf-2016-11-10-2gb*
+
  sha256sum bone-debian-8.6-console-armhf-2017-01-13-2gb*
  722d224137285ef9992354d58d93e97e1c1a8398a40ac71ffd011e1d17a76481 bone-debian-8.6-console-armhf-2016-11-10-2gb.img.xz
+
  0d3261f95032299ee507a3ee81cd5b78b84ebf469ee52cf7b9071b2c7090987f bone-debian-8.6-console-armhf-2017-01-13-2gb.img.xz
  
 
Windows/Mac/Linux gui
 
Windows/Mac/Linux gui
Line 348: Line 348:
  
 
Linux: (dd)
 
Linux: (dd)
  xzcat bone-debian-8.6-console-armhf-2016-11-10-2gb.img.xz | sudo dd of=/dev/sdX
+
  xzcat bone-debian-8.6-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX
  
 
== OMAP5432 uEVM ==
 
== OMAP5432 uEVM ==
Line 364: Line 364:
  
 
Image Updated:
 
Image Updated:
 +
*2017-01-13
 +
** OMAP5432 uEVM: v4.4.40-ti-r80 kernel
 
*2016-11-10
 
*2016-11-10
 
** OMAP5432 uEVM: v4.4.30-ti-r66 kernel
 
** OMAP5432 uEVM: v4.4.30-ti-r66 kernel
 
*2016-10-06
 
*2016-10-06
 
** OMAP5432 uEVM: v4.4.23-ti-r51 kernel
 
** OMAP5432 uEVM: v4.4.23-ti-r51 kernel
*2016-09-28
 
** OMAP5432 uEVM: v4.4.22-ti-r48 kernel
 
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2016-11-10/microsd/omap5-uevm-debian-8.6-console-armhf-2016-11-10-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2017-01-13/microsd/omap5-uevm-debian-8.6-console-armhf-2017-01-13-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum omap5-uevm-debian-8.6-console-armhf-2016-11-10-2gb*
+
  sha256sum omap5-uevm-debian-8.6-console-armhf-2017-01-13-2gb*
  3e56371a7789f2e640156b4ee9ec2fbc638341e61771dc44850f16c40912169d omap5-uevm-debian-8.6-console-armhf-2016-11-10-2gb.img.xz
+
  a772986cf1e6d6bc8f6301a1bf25659333a6136f4e9b2a95519cac25ea3a6222 omap5-uevm-debian-8.6-console-armhf-2017-01-13-2gb.img.xz
  
 
Windows/Mac/Linux gui
 
Windows/Mac/Linux gui
Line 382: Line 382:
  
 
Linux: (dd)
 
Linux: (dd)
  xzcat omap5-uevm-debian-8.6-console-armhf-2016-11-10-2gb.img.xz | sudo dd of=/dev/sdX
+
  xzcat omap5-uevm-debian-8.6-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX
  
 
== BeagleBoard-X15 ==
 
== BeagleBoard-X15 ==
Line 398: Line 398:
  
 
Image Updated:
 
Image Updated:
 +
*2017-01-13
 +
** BeagleBoard-X15: v4.4.40-ti-r80 kernel
 
*2016-11-10
 
*2016-11-10
 
** BeagleBoard-X15: v4.4.30-ti-r66 kernel
 
** BeagleBoard-X15: v4.4.30-ti-r66 kernel
 
*2016-10-06
 
*2016-10-06
 
** BeagleBoard-X15: v4.4.23-ti-r51 kernel
 
** BeagleBoard-X15: v4.4.23-ti-r51 kernel
*2016-09-28
 
** BeagleBoard-X15: v4.4.22-ti-r48 kernel
 
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2016-11-10/microsd/bbx15-debian-8.6-console-armhf-2016-11-10-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2017-01-13/microsd/bbx15-debian-8.6-console-armhf-2017-01-13-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum bbx15-debian-8.6-console-armhf-2016-11-10-2gb*
+
  sha256sum bbx15-debian-8.6-console-armhf-2017-01-13-2gb*
  2365602326314f3fd2371aafa18204a703d28e4c4e95ee030e13f7b724191222 bbx15-debian-8.6-console-armhf-2016-11-10-2gb.img.xz
+
  3191816151274d6574f73efe5a719699e7797108bf6cd9a2b8e4fc574f663d8b bbx15-debian-8.6-console-armhf-2017-01-13-2gb.img.xz
  
 
Windows/Mac/Linux gui
 
Windows/Mac/Linux gui
Line 416: Line 416:
  
 
Linux: (dd)
 
Linux: (dd)
  xzcat bbx15-debian-8.6-console-armhf-2016-11-10-2gb.img.xz | sudo dd of=/dev/sdX
+
  xzcat bbx15-debian-8.6-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX
  
 
= Debian Configuration =
 
= Debian Configuration =

Revision as of 13:58, 13 January 2017

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard-xM --dtb omap3-beagle-xm
BeagleBoard-X15 --dtb am57xx-beagle-x15
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB

Debian 8 (jessie)

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v4.9.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.4.y -b tmp
./build_kernel.sh

Debian (jessie)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2017-01-13
    • BeagleBoard xM: v4.9.3-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.40-ti-r80 kernel
    • OMAP5432 uEVM: v4.4.40-ti-r80 kernel
    • BeagleBoard-X15: v4.4.40-ti-r80 kernel
  • 2016-11-10
    • BeagleBoard xM: v4.8.7-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.30-ti-r66 kernel
    • OMAP5432 uEVM: v4.4.30-ti-r66 kernel
    • BeagleBoard-X15: v4.4.30-ti-r66 kernel
  • 2016-10-06
    • BeagleBoard xM: v4.8.0-armv7-x2 kernel
    • All BeagleBone Varients: v4.4.23-ti-r51 kernel
    • OMAP5432 uEVM: v4.4.23-ti-r51 kernel
    • BeagleBoard-X15: v4.4.23-ti-r51 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-01-13/elinux/debian-8.6-console-armhf-2017-01-13.tar.xz

Verify Image with:

sha256sum debian-8.6-console-armhf-2017-01-13.tar.xz
cda6642635dd2c13d3583f571dcf22c993c21904749e192344af824f368893b4  debian-8.6-console-armhf-2017-01-13.tar.xz

Unpack Image:

tar xf debian-8.6-console-armhf-2017-01-13.tar.xz
cd debian-8.6-console-armhf-2017-01-13

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • All BeagleBone Varients - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2017.01 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf

Debian Testing (stretch)

Image Updated:

  • 2017-01-13
    • BeagleBoard xM: v4.9.3-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.40-ti-r80 kernel
    • OMAP5432 uEVM: v4.4.40-ti-r80 kernel
    • BeagleBoard-X15: v4.4.40-ti-r80 kernel
  • 2016-11-10
    • BeagleBoard xM: v4.8.7-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.30-ti-r66 kernel
    • OMAP5432 uEVM: v4.4.30-ti-r66 kernel
    • BeagleBoard-X15: v4.4.30-ti-r66 kernel
  • 2016-10-06
    • BeagleBoard xM: v4.8.0-armv7-x2 kernel
    • All BeagleBone Varients: v4.4.23-ti-r51 kernel
    • OMAP5432 uEVM: v4.4.23-ti-r51 kernel
    • BeagleBoard-X15: v4.4.23-ti-r51 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-01-13/elinux/debian-stretch-console-armhf-2017-01-13.tar.xz

Verify Image with:

sha256sum debian-stretch-console-armhf-2017-01-13.tar.xz
66dff071128748517dfe4ffe4da9f529b279104eb32047d55b5bee8fd00be0ab  debian-stretch-console-armhf-2017-01-13.tar.xz

Unpack image:

tar xf debian-stretch-console-armhf-2017-01-13.tar.xz
cd debian-stretch-console-armhf-2017-01-13

Then follow the directions shown above with the other images...

Flasher

eMMC: All BeagleBone Varients with eMMC

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2017-01-13
    • All BeagleBone Varients with eMMC: v4.4.40-ti-r80 kernel
  • 2016-11-10
    • All BeagleBone Varients with eMMC: v4.4.30-ti-r66 kernel
  • 2016-10-06
    • All BeagleBone Varients with eMMC: v4.4.23-ti-r51 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-01-13/flasher/BBB-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb.img.xz

Verify Image with:

sha256sum BBB-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb*
5421a6a4cd9107ef5323c91bc41cef22383a5e1c4fa7ba6c54be6373e6fdc9cf  BBB-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat BBB-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX

eMMC: BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2017-01-13
    • BeagleBoard-X15: v4.4.40-ti-r80 kernel
  • 2016-11-10
    • BeagleBoard-X15: v4.4.30-ti-r66 kernel
  • 2016-10-06
    • BeagleBoard-X15: v4.4.23-ti-r51 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-01-13/flasher/bbx15-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb.img.xz

Verify Image with:

sha256sum bbx15-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb*
f1ff6ca3fb329dd060079f3814cfc3fa9d12f6a3cf8cc3937b4dc2318d1b60d2  bbx15-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbx15-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX

raw microSD img

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-01-13
    • BeagleBoard xM: v4.9.3-armv7-x4 kernel
  • 2016-11-10
    • BeagleBoard xM: v4.8.7-armv7-x4 kernel
  • 2016-10-06
    • BeagleBoard xM: v4.8.0-armv7-x2 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-01-13/microsd/bbxm-debian-8.6-console-armhf-2017-01-13-2gb.img.xz

Verify Image with:

sha256sum bbxm-debian-8.6-console-armhf-2017-01-13-2gb*
525e09fed668831d500d9ed63beedd0d2080b6457df76000bf5bb280d1f6996a  bbxm-debian-8.6-console-armhf-2017-01-13-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbxm-debian-8.6-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX

All BeagleBone Varients

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-01-13
    • All BeagleBone Varients: v4.4.40-ti-r80 kernel
  • 2016-11-10
    • All BeagleBone Varients: v4.4.30-ti-r66 kernel
  • 2016-10-06
    • All BeagleBone Varients: v4.4.23-ti-r51 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-01-13/microsd/bone-debian-8.6-console-armhf-2017-01-13-2gb.img.xz

Verify Image with:

sha256sum bone-debian-8.6-console-armhf-2017-01-13-2gb*
0d3261f95032299ee507a3ee81cd5b78b84ebf469ee52cf7b9071b2c7090987f  bone-debian-8.6-console-armhf-2017-01-13-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bone-debian-8.6-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-01-13
    • OMAP5432 uEVM: v4.4.40-ti-r80 kernel
  • 2016-11-10
    • OMAP5432 uEVM: v4.4.30-ti-r66 kernel
  • 2016-10-06
    • OMAP5432 uEVM: v4.4.23-ti-r51 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-01-13/microsd/omap5-uevm-debian-8.6-console-armhf-2017-01-13-2gb.img.xz

Verify Image with:

sha256sum omap5-uevm-debian-8.6-console-armhf-2017-01-13-2gb*
a772986cf1e6d6bc8f6301a1bf25659333a6136f4e9b2a95519cac25ea3a6222  omap5-uevm-debian-8.6-console-armhf-2017-01-13-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat omap5-uevm-debian-8.6-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-01-13
    • BeagleBoard-X15: v4.4.40-ti-r80 kernel
  • 2016-11-10
    • BeagleBoard-X15: v4.4.30-ti-r66 kernel
  • 2016-10-06
    • BeagleBoard-X15: v4.4.23-ti-r51 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-01-13/microsd/bbx15-debian-8.6-console-armhf-2017-01-13-2gb.img.xz

Verify Image with:

sha256sum bbx15-debian-8.6-console-armhf-2017-01-13-2gb*
3191816151274d6574f73efe5a719699e7797108bf6cd9a2b8e4fc574f663d8b  bbx15-debian-8.6-console-armhf-2017-01-13-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbx15-debian-8.6-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX

Debian Configuration

Install Latest Kernel Image

General apt syntax for searching and installing a specific kernel:

sudo apt-get update
sudo apt-cache search linux-image | grep <branch>
sudo apt-get install linux-image-<specific version>
sudo reboot

Latest kernel script

cd /opt/scripts/tools/
git pull
sudo ./update_kernel.sh <OPTIONS>

3.8.x

This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
3.8.x BeagleBone/BeagleBone Black FULL Cape Support
--bone-channel --stable
3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
--bone-xenomai-channel --stable

4.1.x-ti

This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.1
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.1.y
4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
--ti-channel --lts-4_1
4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
--ti-rt-channel --lts-4_1

4.4.x-ti

This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.4
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.4.y
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
--ti-channel --lts-4_4
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
--ti-rt-channel --lts-4_4
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + Xenomai
--ti-xenomai-channel --lts-4_4

Mainline (lts)

4.1.x BeagleBone/BeagleBone Black + SGX
--bone-kernel --lts-4_1
4.1.x BeagleBone/BeagleBone Black + RT + SGX
--bone-rt-kernel --lts-4_1

Mainline (4.4.x lts)

4.4.x BeagleBone/BeagleBone Black + SGX
--bone-kernel --lts-4_4
4.4.x BeagleBone/BeagleBone Black + RT + SGX
--bone-rt-kernel --lts-4_4

Mainline (4.9.x lts)

4.9.x BeagleBone/BeagleBone Black
--bone-kernel --lts-4_9

Debian 8: jessie

sudo apt-get install linux-image-armmp

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install the "4.1.x" lts/bone kernel: http://elinux.org/BeagleBoardDebian#Mainline_.28lts.29

Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v4.1 -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.02.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade