Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
m (DSP: merge xorg stuff from ubuntu)
 
(306 intermediate revisions by 17 users not shown)
Line 3: Line 3:
 
[[Category:Development Boards]]
 
[[Category:Development Boards]]
 
[[Category: BeagleBoard]]
 
[[Category: BeagleBoard]]
This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. To prepare the SD card and install (ARM EABI) Debian on it, [http://bellard.org/qemu/ QEMU] on host PC will be used, following Aurélien Jarno's excellent [http://www.aurel32.net/info/debian_arm_qemu.php Debian on an emulated ARM machine] howto.
+
This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
  
Note: Debian armel deb's are compiled for armv4t, this allows debian to support a larger number of arm devices with a single port, at only the sacrifice of speed.
+
Note: Original Beagleboards work with the Debian Console image booted via holding user button down. Last tested 05/2020. Ref: https://github.com/beagleboard/Latest-Images/issues/48
 
 
= KNOWN ISSUES =
 
 
 
2.6.29-oer* USB still flaky on the RevC ehci port.. --[[User:RobertCNelson|RobertCNelson]] 18:17, 6 May 2009 (UTC)
 
  
 
= Help =
 
= Help =
Line 16: Line 12:
  
 
*Kernel related help:
 
*Kernel related help:
 +
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
** [http://beagleboard.org/discuss Email beagleboard user groups]
+
** Kernel Trees
** [https://launchpad.net/~beagleboard-kernel Launchpad Project "Beagleboard Kernel"]
+
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v5.4.x kernel branch]
*** [https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-stable Launchpad Stable Kernel 2.6.31 src]
+
*** [https://github.com/RobertCNelson/bb-kernel/ BeagleBone]
*** [https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-dev Launchpad Development Kernel 2.6.32 src]
+
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
*** [https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-mainline Launchpad Kernel git src]
 
*** [https://code.launchpad.net/~beagleboard-kernel/+junk/omap-lucid Launchpad Kernel for Ubuntu Lucid (10.04)]
 
** [http://rcn-ee.net/deb/ trac/svn interface for the kernel builds]
 
  
 
*When asking for help, please provide some debugging information:
 
*When asking for help, please provide some debugging information:
Line 30: Line 24:
 
** pastebin dmesg
 
** pastebin dmesg
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 +
 +
= Official BeagleBoard.org Images for shipping with BeagleBone Black =
 +
* http://beagleboard.org/source
  
 
= Recommended Beagle Software =  
 
= Recommended Beagle Software =  
* Recent x-loader/MLO
 
** RevC2/3 Boards are fine and do not need an upgrade
 
** Old RevB Boards should upgrade there MLO from here: http://www.angstrom-distribution.org/beagleboard-demo-image-available
 
  
* Recent U-Boot with 'boot.scr' scripts enabled
+
Mainline U-Boot:
** u-boot.bin from here: http://www.angstrom-distribution.org/beagleboard-demo-image-available
+
* All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
** Or this one I've archived: [http://elinux.org/BeagleBoardUbuntu#Upgrade_U-Boot U-Boot 2009.08+r37 Upgrade]  
+
* XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
*** Version 2009.01 (factory installed on C2/3's) and earlier will not work with this guide
+
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
  
= Native Net Install =  
+
= Debian NetInstall =  
  
Testing First Release:
+
Scripts:
 +
git clone https://github.com/RobertCNelson/netinstall.git
 +
cd netinstall
  
==Development PC: Format SD Card==
+
Device Options:
 +
BeagleBoard --dtb omap3-beagle
 +
BeagleBoard-xM --dtb omap3-beagle-xm
 +
BeagleBoard-X15 --dtb am57xx-beagle-x15
 +
BeagleBone (serial) --dtb am335x-bone-serial
 +
BeagleBone (video via cape) --dtb am335x-bone-video
 +
BeagleBone Black --dtb am335x-boneblack
 +
PandaBoard (A1->A3) --dtb omap4-panda
 +
PandaBoard (A4->Ax) --dtb omap4-panda-a4
 +
PandaBoard ES  --dtb omap4-panda-es
  
 
You will need a 1GB SD card or greater.
 
You will need a 1GB SD card or greater.
 
  Standard System : ~455MB
 
  Standard System : ~455MB
+ Desktop environment (GNOME) : ~2.9GB
 
 
Starting with an empty SD card and using gparted, create:
 
50 MiB Primary Partition, fat32
 
Leave remaining space for the Debian-Installer
 
 
==Development PC: Setup SD U-boot Partition==
 
 
Mount your SD card fat32 partition. (/media/disk/)
 
 
Debian Lenny Stable
 
cd /media/disk/
 
sudo wget http://rcn-ee.net/deb/kernel/CC-beagle-v2.6.29-58cf2f1-oer44.1.uImage
 
sudo wget http://ftp.debian.org/debian/dists/lenny/main/installer-armel/current/images/versatile/netboot/initrd.gz
 
sudo mv CC-beagle-v2.6.29-58cf2f1-oer44.1.uImage uImage
 
sudo gzip -d initrd.gz
 
sudo dd if=initrd of=initrd.pad ibs=8388608 conv=sync
 
 
Create U-boot boot script for netinstall:
 
 
Debian Install over DVI Port
 
nano netinstall.cmd
 
setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; fatload mmc 0:1 0x81600000 initrd.pad; bootm 0x80300000'
 
setenv bootargs 'console=tty0 ramdisk_size=8192 root=/dev/ram0 rw rootfstype=ext2 initrd=0x81600000,8M omapfb.mode=dvi:1280x720MR-16@60'
 
boot
 
 
Debian Install over the Serial Port
 
nano netinstall.cmd
 
setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; fatload mmc 0:1 0x81600000 initrd.pad; bootm 0x80300000'
 
setenv bootargs 'console=ttyS2,115200n8 ramdisk_size=8192 root=/dev/ram0 rw rootfstype=ext2 initrd=0x81600000,8M'
 
boot
 
 
Create U-boot *.scr file:
 
 
mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "Debian Lenny" -d ./netinstall.cmd ./boot.scr
 
 
Sync and Unmount your mmc card and boot the beagle, it should find the 'boot.scr' file on your first partition while booting.
 
 
==Beagleboard: netinstall==
 
 
Choose a language
 
  C - No localization
 
  English - English
 
 
Configure the network:
 
  usb0: USB net <- See below for 2.6.29. Could not find usb0 with B7 installing 2.6.28.
 
  eth0: Ethernet <- Your usb-ethernet device
 
  wlan0: Wifi <- Your usb-wifi device.. See [[BeagleBoardDebianWifiInstallInfo]] for my hack to set it up.
 
 
Configuring usb0 network bridge for 2.6.29:
 
  While you chose your keyboard layout, setup a bridge with ethX and usbX.
 
  # ifconfig ethX 0.0.0.0
 
  # ifconfig usbX 0.0.0.0
 
  # brctl addbr brX
 
  # brctl addif brX ethX
 
  # brctl addif brX usbX
 
  # ifconfig brX up
 
  # dhclient brX
 
  ''*Sometimes the first beagle DHCP will fail(probably due PC trying autoconnect), just run the auto configuration again and it will configure it right.''
 
 
Continue the install without loading kernel modules? : <yes>
 
 
Partition disks: This partitioner doesn't have the inform.....? : <yes>
 
  Logical Volume Manager not available: <Continue>
 
 
Partition disks:
 
  Guided - Use the largest continuous free space
 
 
Partitioning scheme....
 
 
Example:
 
MMC/SD card #1 (mmcblk0) - 2.0 GB Unknown
 
>  #1 primary  57.5 MB    fat32
 
>  #2 primary  1.8 GB B f ext3  /
 
>  #5 logical 148.0 MB  f swap  swap
 
Finish partitioning and write changes to disk
 
  Write the changes to disk? : <yes>
 
 
No installable kernel was found in the defined APT sources? :
 
  Continue without installing a kernel? : <yes>
 
 
Standard System
 
 
No BootLoader: <ok>
 
 
==Development PC: Setup U-boot for Normal Boot==
 
 
Create a U-boot normal boot script:
 
 
DVI Port
 
nano normal.cmd
 
setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
 
setenv bootargs 'console=tty0 root=/dev/mmcblk0p2 rootwait rootfstype=ext3 ro omapfb.mode=dvi:1280x720MR-16@60'
 
boot
 
 
Serial Port
 
nano normal.cmd
 
setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
 
setenv bootargs 'console=ttyS2,115200n8 root=/dev/mmcblk0p2 rootwait rootfstype=ext3 ro'
 
 
Create U-boot *.scr file:
 
 
mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "Debian Lenny" -d ./normal.cmd ./boot.scr
 
 
Debian will fix the ext3 partition, it'll try to reboot, after halting remove and reapply power.
 
  
==Beagleboard: install kernel-image==
+
== Debian 10 (buster) ==
  
===Script File===
+
Quick Install script for "board"
Every Kernel upload going further on rcn-ee.net will now have an 'install-me.sh' file in the same directory..
+
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro stretch
  
  example: http://www.rcn-ee.net/deb/kernel/beagle/lenny/v2.6.31.6-x6.0/
+
So For the BeagleBoard xM:
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro stretch
wget http://rcn-ee.net/deb/kernel/beagle/lenny/v2.6.31.6-x6.0/install-me.sh
 
sudo /bin/bash install-me.sh
 
  
Note: vmlinuz symbolic link (yes <or> no)...
+
*Options:
 +
**--firmware : installs firmware
 +
**--serial-mode : debian-installer uses Serial Port
  
Reboot with your new uImage
+
= Demo Image =
  
= Debian Configuration =
+
* '''Advanced Users only''': BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
 +
git clone https://github.com/RobertCNelson/armv7-multiplatform.git
 +
cd armv7-multiplatform
 +
git checkout origin/v5.4.x -b tmp
 +
./build_kernel.sh
 +
* '''Advanced Users only''': BeagleBone/BeagleBone Black/PocketBeagle:  Kernel v4.19.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.19.y
 +
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev
 +
git checkout origin/ti-linux-4.19.y -b tmp
 +
./build_kernel.sh
  
== Serial Ports ==
+
== Debian (buster) ==
  
Lenny
+
Default username/password:
 +
*username: debian
 +
*password: temppwd
  
edit /etc/inittab and add:
+
Image Updated:
S:2345:respawn:/sbin/getty 115200 ttyS2
+
*2020-03-12
 +
** BeagleBoard xM: v5.4.24-armv7-x20 kernel
 +
** All BeagleBone Variants and PocketBeagle: v4.19.94-ti-r36 kernel
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
 +
*2019-04-10
 +
** BeagleBoard xM: v4.19.31-armv7-x31 kernel
 +
** All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
 +
** BeagleBoard-X15: v4.14.108-ti-r104 kernel
 +
*2018-12-10
 +
** BeagleBoard xM: v4.19.8-armv7-x11 kernel
 +
** All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel
 +
** BeagleBoard-X15: v4.14.79-ti-r84 kernel
  
For root access over the serial port add ttyS2 to /etc/securetty
+
Services Active:
 +
Note: Depending on your internal network these may work out of the box
 +
Apache, Port 80: http://arm.local/ (Bone: via usb) (Windows/Linux) http://192.168.7.2, (Mac/Linux) http://192.168.6.2
 +
SSH, Port 22: ssh debian@arm.local (Bone: via usb) (Windows/Linux) debian@192.168.7.2, (Mac/Linux) debian@192.168.6.2
 +
Getty, Serial Port
  
== fbdev Drivers ==
+
Default user: debian pass: temppwd
  
/etc/X11/xorg.conf:
+
Get prebuilt image:
Section "Device"
+
wget https://rcn-ee.com/rootfs/2020-03-12/elinux/debian-10.3-console-armhf-2020-03-12.tar.xz
Identifier "Configured Video Device"
 
Option "UseFBDev" "true"
 
Driver "fbdev"
 
EndSection
 
  
== WiFi ==
+
Verify Image with:
 +
sha256sum debian-10.3-console-armhf-2020-03-12.tar.xz
 +
b6f1ca53d67554d0381ca59fe9ecd50b5013a073abd2b2e133aa8be1784cdbc6  debian-10.3-console-armhf-2020-03-12.tar.xz
  
See [[BeagleBoardDebianWifiInstallInfo|BeagleBoard Debian WiFi install info]].
+
Unpack Image:
 +
tar xf debian-10.3-console-armhf-2020-03-12.tar.xz
 +
cd debian-10.3-console-armhf-2020-03-12
  
== Xorg omapfb Drivers ==
+
If you don't know the location of your SD card:
 +
sudo ./setup_sdcard.sh --probe-mmc
  
=== Drivers ===
+
You should see something like:
Note: In Debian this will eventually move from sid to squeeze: http://packages.qa.debian.org/x/xf86-video-omapfb.html  It's too late for lenny.
 
  
Note: These are built with neon optimizations: http://git.debian.org/?p=collab-maint/xf86-video-omapfb.git;a=blob;f=debian/rules;h=c2f0d5391c96c5abb60b1e691ad86bb27e0c17d8;hb=HEAD  (line 48/49)
+
Are you sure? I don't see [/dev/idontknow], here is what I do see...
 
 
lenny:
 
wget -c http://rcn-ee.homeip.net:81/dl/deb-sbuild/lenny/xorg-drivers/xserver-xorg-video-omap3_0.1.1-2_armel.deb
 
sudo dpkg -i xserver-xorg-video-omap3_0.1.1-2_armel.deb
 
 
 
squeeze:
 
sudo apt-get install xserver-xorg-video-omap3
 
 
 
=== xorg.conf ===
 
/etc/X11/xorg.conf
 
 
 
Section "Monitor"
 
    Identifier "Configured Monitor"
 
EndSection
 
 
   
 
   
  Section "Screen"
+
  fdisk -l:
    Identifier "Default Screen"
+
Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
    Device "Configured Video Device"
+
  Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
    #Limited by SGX?
 
    DefaultDepth 16
 
  EndSection
 
 
   
 
   
  Section "Device"
+
  lsblk:
    Identifier "Configured Video Device"
+
NAME  MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
     Driver "omapfb"
+
sda     8:0    0 465.8G  0 disk
    Option "fb" "/dev/fb0"
+
├─sda1  8:1    0 446.9G  0 part / '''<- x86 Root Partition'''
  EndSection
+
  ├─sda2  8:2   0    1K 0 part
 
+
└─sda5  8:5   0 18.9G  0 part [SWAP]
Note: Use xvinfo to check if it works:
+
sdd     8:48  1   3.7G  0 disk
  X-Video Extension version 2.2
+
├─sdd1  8:49  1    64M  0 part
  screen #0
+
└─sdd2  8:50  1   3.6G  0 part
   Adaptor #0: "OMAP XV adaptor"
 
     number of ports: 1
 
    port base: 56
 
    operations supported: PutImage
 
    supported visuals:
 
      depth 16, visualID 0x21
 
    number of attributes: 1
 
    etc...
 
  
== SGX Video Acceleration ==
+
* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
  
=== Kernel Modules ===
+
Install Image:
  
The 'install-me.sh' script will download and install these, however make sure to issue this command to update the omaplfb modules.
+
Quick install script for [board]
 
+
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
  sudo depmod -a omaplfb
 
 
 
=== SDK ===
 
 
 
Make sure to use a "corporate email" : http://software-dl.ti.com/dsps/forms/export.html?prod_no=/OMAP35x_Graphics_SDK_setuplinux_3_00_00_09.bin
 
 
 
Note: the SDK will not extract directly on any arm platform, extract it first on an x86 machine and tar the resulting folder before transferring to the beagleboard.
 
 
 
System Libraries:
 
sudo ln -sf /usr/lib/libXdmcp.so.6.0.0 /usr/lib/libXdmcp.so.0
 
sudo ln -sf /usr/lib/libXau.so.6.0.0 /usr/lib/libXau.so.0
 
 
 
SDK install lib/bin from 3.00.00.09:
 
sudo mkdir /usr/lib/ES2.0
 
sudo mkdir /usr/bin/ES2.0
 
 
sudo mkdir /usr/lib/ES3.0
 
sudo mkdir /usr/bin/ES3.0
 
 
sudo cp SDK_EXT_DIR/gfx_rel_es2.x/lib* /usr/lib/ES2.0
 
sudo cp SDK_EXT_DIR/gfx_rel_es2.x/p[dv]* /usr/bin/ES2.0
 
 
sudo cp SDK_EXT_DIR/gfx_rel/lib* /usr/lib/ES3.0
 
sudo cp SDK_EXT_DIR/gfx_rel/p[dv]* /usr/bin/ES3.0
 
  
=== Startup Script ===
+
board options:
 +
*BeagleBoard Ax/Bx/Cx/Dx          - omap3-beagle
 +
*BeagleBoard xM                  - omap3-beagle-xm
 +
*All BeagleBone Variants          - beaglebone
 +
*OMAP5432 uEVM                    - omap5-uevm
 +
*BeagleBoard-X15 (BeagleBone AI)  - am57xx-beagle-x15
  
For 3.00.00.09
+
So for the BeagleBoard xM:
 +
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
  
Lenny:
+
Advanced: Build Image:
sudo nano /etc/rcS.d/S60pvr.sh
 
sudo chmod +x /etc/rcS.d/S60pvr.sh
 
  
Squeeze: (probally lenny too)
+
git clone https://github.com/RobertCNelson/omap-image-builder.git
sudo nano /etc/init.d/pvr
+
  cd omap-image-builder
sudo chmod +x /etc/init.d/pvr
+
git checkout v2020.03 -b tmp
  sudo update-rc.d pvr defaults
 
  
#!/bin/sh
+
Stable:
 
if [ "$1" = "" ]; then
 
echo PVR-INIT: Please use start, stop, or restart.
 
exit 1
 
fi
 
 
if [ "$1" = "stop" -o  "$1" = "restart" ]; then
 
echo Stopping PVR
 
rmmod omaplfb 2>/dev/null
 
rmmod pvrsrvkm 2>/dev/null
 
fi
 
 
if [ "$1" = "stop" ]; then
 
exit 0
 
fi
 
 
echo Starting PVR
 
modprobe omaplfb
 
 
pvr_maj=`grep "pvrsrvkm$" /proc/devices | cut -b1,2,3`
 
 
if [ -e /dev/pvrsrvkm ] ; then
 
rm -f /dev/pvrsrvkm
 
fi
 
 
mknod /dev/pvrsrvkm c $pvr_maj 0
 
chmod 666 /dev/pvrsrvkm
 
 
touch /etc/powervr-esrev
 
 
SAVED_ESREVISION="$(cat /etc/powervr-esrev)"
 
ES_REVISION="$(cat /proc/cpuinfo | grep "CPU revision" | awk -F: '{print $2}')"
 
 
if [ "${ES_REVISION}" != "${SAVED_ESREVISION}" ] ; then
 
echo -n "Starting SGX fixup for"
 
if [ "${ES_REVISION}" = " 3" ] ; then
 
echo " ES3.x"
 
cp -a /usr/lib/ES3.0/* /usr/lib
 
cp -a /usr/bin/ES3.0/* /usr/bin
 
else
 
echo " ES2.x"
 
cp -a /usr/lib/ES2.0/* /usr/lib
 
cp -a /usr/bin/ES2.0/* /usr/bin
 
fi
 
 
echo "${ES_REVISION}" > /etc/powervr-esrev
 
fi
 
 
/usr/bin/pvrsrvinit
 
  
== Xorg omapfb Drivers ==
+
./RootStock-NG.sh -c rcn-ee_console_debian_buster_armhf
  
By default Debian will try to use the FBDEV video driver, however for the beagleboard we can take advantage of a more software optimized driver (still not using the sgx video hardware) using the NEON extensions of the Cortex-A8 core.
+
= Flasher =
  
cat /var/log/Xorg.0.log | grep FBDEV
+
== eMMC: All BeagleBone Variants with eMMC ==
(II) FBDEV: driver for framebuffer: fbdev
 
(II) FBDEV(0): using default device
 
(II) FBDEV(0): Creating default Display subsection in Screen section
 
(==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
 
(==) FBDEV(0): RGB weight 565
 
  
Login into Debian and open a new terminal, xorg has to be running..
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io  First press and hold the boot select button (next to the microSD card), then apply power. On boot-up the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the Ethernet jack. Progress is reported on both the serial debug and HDMI connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
  
xvinfo -display :0.0
+
Script for reference: (this is the script that writes to the eMMC)
  X-Video Extension version 2.2
+
  https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
screen #0
 
  no adaptors present
 
  
=== Drivers ===
+
This script will only take about 5-6 Minutes after power on.
  
Note: These are built with neon optimizations: http://git.debian.org/?p=collab-maint/xf86-video-omapfb.git;a=blob;f=debian/rules;h=c2f0d5391c96c5abb60b1e691ad86bb27e0c17d8;hb=HEAD  (line 48/49)
+
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
Lenny:
+
User: debian
wget -c http://rcn-ee.homeip.net:81/dl/deb-sbuild/lenny/xorg-drivers/xserver-xorg-video-omap3_0.1.1-2_armel.deb
+
pass: temppwd
sudo dpkg -i xserver-xorg-video-omap3_0.1.1-2_armel.deb
 
  
Squeeze/Sid:
+
Image Updated:
sudo apt-get install xserver-xorg-video-omap3
+
*2020-03-12
 +
** All BeagleBone Variants with eMMC: v4.19.94-ti-r36 kernel
 +
*2019-04-10
 +
** All BeagleBone Variants with eMMC: v4.14.108-ti-r104 kernel
 +
*2018-12-10
 +
** All BeagleBone Variants with eMMC: v4.14.79-ti-r84 kernel
  
=== xorg.conf ===
+
Get prebuilt image:
/etc/X11/xorg.conf
+
wget https://rcn-ee.com/rootfs/2020-03-12/flasher/bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
Section "Monitor"
+
Verify Image with:
    Identifier "Configured Monitor"
+
  sha256sum bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb*
EndSection
+
  12a449c3426d811765e8ef0236ae3ddc74fc645a482640984435452929ebf55d bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
 
Section "Screen"
 
    Identifier "Default Screen"
 
    Device "Configured Video Device"
 
    #Limited by SGX?
 
    DefaultDepth 16
 
  EndSection
 
   
 
Section "Device"
 
    Identifier "Configured Video Device"
 
    Driver "omapfb"
 
    Option "fb" "/dev/fb0"
 
  EndSection
 
  
To verify it was correctly installed, reboot and:
+
Windows/Mac/Linux gui
 +
http://etcher.io
  
cat /var/log/Xorg.0.log | grep omapfb
+
Linux: (dd)
(II) LoadModule: "omapfb"
+
  xzcat bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
(II) Loading /usr/lib/xorg/modules/drivers//omapfb_drv.so
 
  (II) Module omapfb: vendor="X.Org Foundation"
 
(II) omapfb: Driver for OMAP framebuffer (omapfb) and external LCD controllers:
 
(WW) Error opening /sys/devices/platform/omapfb/ctrl/name: No such file or directory
 
(II) omapfb(0): VideoRAM: 1800KiB (SDRAM)
 
(II) omapfb(0): Creating default Display subsection in Screen section
 
(**) omapfb(0): Depth 16, (--) framebuffer bpp 16
 
(==) omapfb(0): RGB weight 565
 
(==) omapfb(0): Default visual is TrueColor
 
(--) omapfb(0): Virtual size is 1280x720 (pitch 1280)
 
(**) omapfb(0):  Built-in mode "current"
 
(==) omapfb(0): DPI set to (96, 96)
 
(II) omapfb(0): DPMS enabled
 
(II) omapfb(0): Video plane capabilities:
 
(II) omapfb(0): Video plane supports the following image formats:
 
(II) omapfb(0): XVideo extension initialized
 
  
Login into Debian and open a new terminal, xorg has to be running..
+
== eMMC: BeagleBoard-X15 and BeagleBone AI ==
  
xvinfo -display :0.0
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On boot-up the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the Ethernet jack. Progress is reported on both the serial debug and HDMI connectors, once completed all 4 LED's should be full ONSimply remove power, remove the microSD card and Debian will now boot directly from eMMC.
  X-Video Extension version 2.2
 
  screen #0
 
  Adaptor #0: "OMAP XV adaptor"
 
    number of ports: 1
 
    port base: 56
 
    operations supported: PutImage
 
    supported visuals:
 
      depth 16, visualID 0x21
 
    number of attributes: 1
 
    etc..
 
  
 +
Script for reference: (this is the script that writes to the eMMC)
 +
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  
== DSP ==
+
This script will only take about 5-6 Minutes after power on.
  
= Advanced =
+
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
== Normal Kernel Build ==
+
User: debian
 +
pass: temppwd
  
Note, this is done native on the BeagleBoard...
+
Image Updated:
 +
*2020-03-12
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
 +
*2019-04-10
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.14.108-ti-r104 kernel
 +
*2018-12-10
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.14.79-ti-r84 kernel
  
GIT Checkout, Beagleboard patches, and defconfig.
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2020-03-12/flasher/am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
Requires:  
+
Verify Image with:
  sudo aptitude install git-core gcc wget kernel-package fakeroot build-essential
+
  sha256sum am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb*
 +
b2d4600cfbeaad90e9d634f8f9671be1223d235e6581aac82897d3f28076d338  am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
For this example lets look at: http://cgit.openembedded.org/cgit.cgi/openembedded/commit/?id=5777be68163ae84a340a252e59069d722aa534cb
+
Windows/Mac/Linux gui
 +
http://etcher.io
  
http://cgit.openembedded.net/cgit.cgi?url=openembedded/tree/conf/machine/include/omap3.inc&id=5777be68163ae84a340a252e59069d722aa534cb -> "oer44"
+
Linux: (dd)
 +
xzcat am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
  
http://cgit.openembedded.net/cgit.cgi?url=openembedded/tree/recipes/linux/linux-omap_2.6.29.bb&id=5777be68163ae84a340a252e59069d722aa534cb -> "GIT" and "PATCHES"
+
= raw microSD img =
  
All build that i do are logged in the build folders: http://rcn-ee.net/deb/kernel/beagle/lenny/v2.6.29-58cf2f1-oer44.1/changes.txt
+
== BeagleBoard xM ==
(easier to mainitain then the old way)
 
  
===Retrieve the GIT checkout===
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io
  
GIT Checkout: 58cf2f1425abfd3a449f9fe985e48be2d2555022 or Shorthand: 58cf2f1
+
User: debian
 +
pass: temppwd
  
git-clone git://git2.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git
+
Auto partition resize:
  cd linux-omap-2.6/
+
  cd /opt/scripts/tools
 
or if you already downloaded it..
 
 
cd linux-omap-2.6/
 
 
  git pull
 
  git pull
   
+
  ./grow_partition.sh
git checkout 58cf2f1 -b v2.6.29-58cf2f1
+
  sudo reboot
git archive --format=tar --prefix=v2.6.29-58cf2f1/ v2.6.29-58cf2f1 | gzip > ../v2.6.29-58cf2f1.tar.gz
 
git checkout master
 
  git branch v2.6.29-58cf2f1 -D
 
cd ..
 
  
===Copy patches and defconfig===
+
Image Updated:
 +
*2020-03-12
 +
** BeagleBoard xM: v5.4.24-armv7-x20 kernel
 +
*2019-04-10
 +
** BeagleBoard xM: v4.19.31-armv7-x31 kernel
 +
*2018-12-10
 +
** BeagleBoard xM: v4.19.8-armv7-x11 kernel
  
Open linux-omap**.bb: http://cgit.openembedded.net/cgit.cgi?url=openembedded/tree/recipes/linux/linux-omap_2.6.29.bb&id=5777be68163ae84a340a252e59069d722aa534cb
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2020-03-12/microsd/bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
This contains 50+ patches need to form a specific (oe) Openembedded release, too keep things neat and simple for my beagle builder, I'll usually combine this into a single diff located here along with the defconfig. http://rcn-ee.homeip.net:81/dl/omap/beagle/v2.6.29-58cf2f1-oer44.1/
+
Verify Image with:
 +
sha256sum bbxm-debian-10.3-console-armhf-2020-03-12-2gb*
 +
864cd6a45179e87c68087150597e18a1c12c81621da7735ee8d5c35094423845  bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
wget http://rcn-ee.homeip.net:81/dl/omap/beagle/v2.6.29-58cf2f1-oer44.1/v2.6.29-58cf2f1-oer44.1.diff
+
Windows/Mac/Linux gui
  wget http://rcn-ee.homeip.net:81/dl/omap/beagle/v2.6.29-58cf2f1-oer44.1/defconfig
+
  http://etcher.io
  
=== Build uImage ===
+
Linux: (dd)
 +
xzcat bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
  
Extract Kernel Source
+
== All BeagleBone Variants and PocketBeagle==
tar -xf v2.6.29-58cf2f1.tar.gz
 
cd v2.6.29-58cf2f1/
 
  
Apply Patch
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io
patch -p1 < ../v2.6.29-58cf2f1-oer44.1.diff
 
  
Copy Defconfig
+
User: debian
cp ../defconfig .config
+
pass: temppwd
  
Testing Changes
+
Auto partition resize:
  make menuconfig
+
  cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
Build uImage
+
Image Updated:
make CROSS_COMPILE= uImage
+
*2020-03-12
 +
** All BeagleBone Variants and PocketBeagle: v4.19.94-ti-r36 kernel
 +
*2019-04-10
 +
** All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
 +
*2018-12-10
 +
** All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel
  
== Build with make-kpkg ==
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2020-03-12/microsd/bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
Note: Use newer or patches/defconfig/git commit from previous section.
+
Verify Image with:
 +
sha256sum bone-debian-10.3-console-armhf-2020-03-12-2gb*
 +
6d898c473edc8a50597ed7da8342c899d88e07b8a6b4c7c143257e947cb5f52d  bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
===Install Dependencies===
+
Windows/Mac/Linux gui
   
+
  http://etcher.io
apt-get install git-core kernel-package fakeroot build-essential curl libncurses-dev uboot-mkimage
 
  
===Linux Kernel===
+
Linux: (dd)
 +
xzcat bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
  
git clone git://git2.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git
+
== BeagleBoard-X15 and BeagleBone AI==
cd linux-omap-2.6/
 
git checkout -b beagle <git commit>
 
  
Patch Kernel with patches you need:
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io
patch -p1 < ~/dl/patches/*.patch
 
  
Setup Kernel .config
+
User: debian
make CROSS_COMPILE= distclean
+
pass: temppwd
  
Copy or Make your defconfig
+
Auto partition resize:
  cp ~/dl/defconfig .config
+
  cd /opt/scripts/tools
  or
+
git pull
  make CROSS_COMPILE= menuconfig
+
  ./grow_partition.sh
 +
  sudo reboot
  
Create Debian linux-image* Package
+
Image Updated:
make-kpkg --cross_compile - clean
+
*2020-03-12
fakeroot make-kpkg --cross_compile - kernel_image
+
** BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
 +
*2019-04-10
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.14.108-ti-r104 kernel
 +
*2018-12-10
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.14.79-ti-r84 kernel
  
Create U-boot uImage
+
Get prebuilt image:
  make CROSS_COMPILE= uImage
+
  wget https://rcn-ee.com/rootfs/2020-03-12/microsd/am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
== Scripted Kernel Build ==
+
Verify Image with:
 +
sha256sum am57xx-debian-10.3-console-armhf-2020-03-12-2gb*
 +
24bfaeac8d90ebd36790ba4c04a4117fe8c2e7aa28de5d1ff0a5ab164e32bb90  am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
https://launchpad.net/~beagleboard-kernel
+
Windows/Mac/Linux gui
 +
http://etcher.io
  
Register on launchpad.net, install bzr
+
Linux: (dd)
  sudo apt-get install bzr
+
  xzcat am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
  
Download SRC (2.6.29)
 
bzr branch lp:~beagleboard-kernel/+junk/2.6-stable
 
  
Build Kernel
+
= Debian Configuration =
. build_kernel.sh
 
  
Build SGX Modules
+
==Install Latest Kernel Image==
. build_sgx_modules.sh
 
  
Build Deb File
+
General apt syntax for searching and installing a specific kernel:
  . build_deb.sh
+
  sudo apt-get update
 +
sudo apt-cache search linux-image | grep <branch>
 +
sudo apt-get install linux-image-<specific version>
 +
sudo reboot
  
= QEMU install method via debian-installer (emulated arm core via Desktop PC)=
+
Latest kernel script
 +
cd /opt/scripts/tools/
 +
git pull
 +
sudo ./update_kernel.sh <OPTIONS>
  
**Planning to drop this section for squeeze, it's slow and ubuntu's rootstock can replace it**
+
== 4.19.x-ti ==
 +
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.19
 +
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.19.y
  
This methods lasted 4 hours on a PC Ubuntu/Lenny (P4 2GHz) with an external USB2.0 card reader.
+
4.19.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
Install QEMU on your host PC. This assumes that your host PC is running Debian as well. If not, install QEMU the way your host PC distribution uses.
+
  --ti-channel --lts-4_19
  apt-get install qemu
 
Note: If your debian armel image crashes while fscking the partition, rebuild qemu from trunk.
 
  
==Development PC: Format SD Card==
+
4.19.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
 +
--ti-rt-channel --lts-4_19
  
You will need a 1GB SD card or greater, depending on the installation chosen :
+
== Mainline (4.19.x lts) ==
Standard System (without graphical environment) : ~455MB
 
+ Desktop environment (GNOME) : ~2.3GB
 
Please note that installer download all packages before installing them, that's why you'll need more space disk.
 
  
Starting with an empty SD card and using gparted/fdisk, create:
+
4.19.x BeagleBone/BeagleBone Black
  50 MiB Primary Partition, fat32
+
  --bone-kernel --lts-4_19
Leave remaining space for the Debian-Installer
 
  
==Development PC: Preparation==
+
4.19.x BeagleBone/BeagleBone Black + RT
 +
--bone-rt-kernel --lts-4_19
  
Create a working directory to keep your files organized.
+
== Debian 9: stretch ==
 +
sudo apt-get install linux-image-armmp
  
mkdir debian-armel
+
Reboot with your new Kernel Image.
cd debian-armel/
 
wget ftp://ftp.us.debian.org/debian/dists/lenny/main/installer-armel/current/images/versatile/netboot/initrd.gz
 
wget ftp://ftp.us.debian.org/debian/dists/lenny/main/installer-armel/current/images/versatile/netboot/vmlinuz-2.6.26-2-versatile
 
  
==Development PC: Install Debian in QEMU==
+
== Xorg Drivers ==
  
Quick Note: Debian Lenny is undergoing Beta/RC testing so these debian installers are currently way out of date, so it will tell you their are unavailable kernel modules, just ignore the question and continue. These modules will be provided later, with the provided linux-image deb.
+
Script:
 
+
  cd /opt/scripts/tools/
To install (ARM EABI) Debian inside QEMU:
+
  git pull
 
 
sudo qemu-system-arm -M versatilepb -kernel vmlinuz-2.6.26-2-versatile -initrd initrd.gz -m 256 -hda /dev/sdX -append "root=/dev/ram mem=256M"
 
Note: root/sudo access is required to access /dev/sdX directly (verify mmc card with fdisk -l)
 
 
 
Partition disks, default settings should work for most: Guided - use the largest continuous free space
 
 
 
[[Image:Beagleboarddebian-partitiondisk.png]]
 
 
 
==Development PC: Running Debian in QEMU (Optional)==
 
Note: This section is only useful for people with out a usb-network device for their beagle who would like to install additional applications, otherwise just skip to the next subsection to install your linux-kernel by copying files from your desktop pc to a SD card.
 
As ext3 filesystem support is not included in kernel you will need an initrd, just copy the one installed in the SD card in /boot.
 
 
 
  sudo qemu-system-arm -M versatilepb -kernel vmlinuz-2.6.26-2-versatile -initrd initrd.img-2.6.26-2-versatile -m 256 -hda /dev/sdX -append "root=/dev/sda2 mem=256M"
 
 
 
Note: Time will be incorrect.
 
 
 
  sudo apt-get install ntpdate
 
ntpdate pool.ntp.org
 
 
 
Install default deb packages for linux-image.
 
  
Stable  2.6.29
+
BeagleBoard/PandaBoard:
  wget http://rcn-ee.net/deb/kernel/beagle/lenny/v2.6.29-58cf2f1-oer44.1/linux-image-2.6.29-oer44.1_1.0lenny_armel.deb
+
  cd /opt/scripts/tools/graphics/
sudo dpkg -i *.deb
+
./ti-omapdrm.sh
  
Note: It's easier to download these straight to the sd card after you've mounted the SD card to copy uImage to the FAT partition.
+
BeagleBone/BeagleBone Black:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-tilcdc.sh
  
==Development PC: Linux Kernel Preparation ==
+
== SGX Drivers ==
 
 
Install uboot-mkimage utility
 
sudo apt-get install uboot-mkimage
 
 
 
Remount SD card, Ubuntu remounts SD card like this:
 
/media/vfat/ <fat32>
 
/media/debian/ <ext3>
 
 
 
Download Kernel-Image
 
cd /media/debian/home/<user>/
 
wget http://rcn-ee.net/deb/kernel/beagle/lenny/v2.6.29-58cf2f1-oer44.1/linux-image-2.6.29-oer44.1_1.0lenny_armel.deb
 
 
 
Extract linux-image's vmlinuz-*
 
dpkg -x linux-image* ./temp
 
 
 
Build uboot compatible image and copy to /media/disk/ <fat32 boot partition>
 
mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008000 -n "Linux" -d ./temp/boot/vmlinuz-*  /media/vfat/uImage
 
 
 
Clean up
 
rm -rfd temp
 
 
 
Sync, umount Partitions and Install sd card in beagleboard
 
 
 
== Beagleboard: Setup U-boot for boot ==
 
 
 
Insert SD Card and power up Beagleboard.
 
 
 
Using a terminal program, stop u-boot and add these commands:
 
 
 
For Linux Kernel 2.6.29 and higher using DSS2
 
setenv bootcmd 'mmcinit; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
 
or
 
setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
 
 
DVI Port
 
setenv bootargs 'console=tty0 root=/dev/mmcblk0p2 rootwait rootfstype=ext3 ro omapfb.mode=dvi:1280x720MR-16@60'
 
 
 
Serial Port
 
setenv bootargs 'console=ttyS2,115200n8 root=/dev/mmcblk0p2 rootwait rootfstype=ext3 ro'
 
 
saveenv
 
boot
 
  
You shall adapt the resolution to you screen as following :
+
=== SGX BeagleBone/BeagleBone Black ===
omapfb.mode=dvi:1280x720MR-24@60
 
Modes:
 
"1024x768MR-24@60""800x600-MR24@60" ...
 
  
Here is more explanation on dss video options : [http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=blob;f=Documentation/fb/modedb.txt;h=ec4dee75a35450376ad13442ea926eaf76de76aa;hb=HEAD]
+
[[BeagleBoneBlack/SGX_%2B_Qt_EGLFS_%2B_Weston|A page is dedicated for the installation and use of the graphics accelerator]].
  
The Beagleboard will reboot 3-4 times while the ext3 filesystem is repaired. (may have to remove power etc)
+
= Building Kernel =
  
==Debian on Beagleboard==
+
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
  
Debian on BeagleBoard uses the following configuration:
+
== Beagle/Beagle xM ==
 +
http://eewiki.net/display/linuxonarm/BeagleBoard
  
* Console log = Serial Terminal
+
== BeagleBone ==
* User Console = HDMI port + usb (keyboard, mouse, etc).  
+
http://eewiki.net/display/linuxonarm/BeagleBone
  
If you want to log in with the serial port, you will have to add to /etc/inittab
+
== BeagleBone Black ==
  S:2345:respawn:/sbin/getty 115200 ttyS2
+
http://eewiki.net/display/linuxonarm/BeagleBone+Black
  
And if you want to log in as root on the serial port, add ttyS2 to /etc/securetty.
+
== Panda/Panda ES ==
 +
http://eewiki.net/display/linuxonarm/PandaBoard
  
Note : the beagle board I have was not configured as USB host. I had to modify it to be able to use mouse and keyboards (see [http://elinux.org/BeagleBoard#OTG]). I you do not want to do this, you'll have to install a Vnc server on the beagle to access desktop.
+
= Upgrading from Debian 5 to Debian 6 =
  
==Current Issues==
+
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
  
#Swap disabled: change /dev/hda5 -> /dev/mmcblk0p5 in /etc/fstab (artifact of qemu install to /dev/hdaX)
+
= Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy) =
#RTC seems to be not enabled: use ntpdate when ethernet works, or issue
 
date +"%m%d%y%H%M" -s MMDDYYHHMM
 
  
[[Image:Beagleboarddebian-GNOME.jpg]]
+
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
  
==Notes==
+
sudo apt-get update ; sudo apt-get upgrade
#'fbdev' is normally *slow* since it completely relies on the system cpu to update the framebuffer. Once the video processing core's driver is released this will no longer be an issue.
+
  sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
# Debian/Gnome actually need the swap to run (up to 90Mo of swap space on my beagle with 128Mo RAM shipped on it) so that it's even slower when using the SD card (try using an external hdd disk).
+
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
 +
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade

Latest revision as of 22:01, 29 May 2020

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Note: Original Beagleboards work with the Debian Console image booted via holding user button down. Last tested 05/2020. Ref: https://github.com/beagleboard/Latest-Images/issues/48

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard-xM --dtb omap3-beagle-xm
BeagleBoard-X15 --dtb am57xx-beagle-x15
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB

Debian 10 (buster)

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro stretch

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro stretch
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v5.4.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.19.y -b tmp
./build_kernel.sh

Debian (buster)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2020-03-12
    • BeagleBoard xM: v5.4.24-armv7-x20 kernel
    • All BeagleBone Variants and PocketBeagle: v4.19.94-ti-r36 kernel
    • BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
  • 2019-04-10
    • BeagleBoard xM: v4.19.31-armv7-x31 kernel
    • All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
    • BeagleBoard-X15: v4.14.108-ti-r104 kernel
  • 2018-12-10
    • BeagleBoard xM: v4.19.8-armv7-x11 kernel
    • All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel
    • BeagleBoard-X15: v4.14.79-ti-r84 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) (Windows/Linux) http://192.168.7.2, (Mac/Linux) http://192.168.6.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) (Windows/Linux) debian@192.168.7.2, (Mac/Linux) debian@192.168.6.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/elinux/debian-10.3-console-armhf-2020-03-12.tar.xz

Verify Image with:

sha256sum debian-10.3-console-armhf-2020-03-12.tar.xz
b6f1ca53d67554d0381ca59fe9ecd50b5013a073abd2b2e133aa8be1784cdbc6  debian-10.3-console-armhf-2020-03-12.tar.xz

Unpack Image:

tar xf debian-10.3-console-armhf-2020-03-12.tar.xz
cd debian-10.3-console-armhf-2020-03-12

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • All BeagleBone Variants - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 (BeagleBone AI) - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2020.03 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_buster_armhf

Flasher

eMMC: All BeagleBone Variants with eMMC

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On boot-up the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the Ethernet jack. Progress is reported on both the serial debug and HDMI connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2020-03-12
    • All BeagleBone Variants with eMMC: v4.19.94-ti-r36 kernel
  • 2019-04-10
    • All BeagleBone Variants with eMMC: v4.14.108-ti-r104 kernel
  • 2018-12-10
    • All BeagleBone Variants with eMMC: v4.14.79-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/flasher/bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb*
12a449c3426d811765e8ef0236ae3ddc74fc645a482640984435452929ebf55d  bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX

eMMC: BeagleBoard-X15 and BeagleBone AI

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On boot-up the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the Ethernet jack. Progress is reported on both the serial debug and HDMI connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2020-03-12
    • BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
  • 2019-04-10
    • BeagleBoard-X15 (and BeagleBone AI): v4.14.108-ti-r104 kernel
  • 2018-12-10
    • BeagleBoard-X15 (and BeagleBone AI): v4.14.79-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/flasher/am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb*
b2d4600cfbeaad90e9d634f8f9671be1223d235e6581aac82897d3f28076d338  am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX

raw microSD img

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2020-03-12
    • BeagleBoard xM: v5.4.24-armv7-x20 kernel
  • 2019-04-10
    • BeagleBoard xM: v4.19.31-armv7-x31 kernel
  • 2018-12-10
    • BeagleBoard xM: v4.19.8-armv7-x11 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/microsd/bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum bbxm-debian-10.3-console-armhf-2020-03-12-2gb*
864cd6a45179e87c68087150597e18a1c12c81621da7735ee8d5c35094423845  bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX

All BeagleBone Variants and PocketBeagle

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2020-03-12
    • All BeagleBone Variants and PocketBeagle: v4.19.94-ti-r36 kernel
  • 2019-04-10
    • All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
  • 2018-12-10
    • All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/microsd/bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum bone-debian-10.3-console-armhf-2020-03-12-2gb*
6d898c473edc8a50597ed7da8342c899d88e07b8a6b4c7c143257e947cb5f52d  bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX

BeagleBoard-X15 and BeagleBone AI

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2020-03-12
    • BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
  • 2019-04-10
    • BeagleBoard-X15 (and BeagleBone AI): v4.14.108-ti-r104 kernel
  • 2018-12-10
    • BeagleBoard-X15 (and BeagleBone AI): v4.14.79-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/microsd/am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum am57xx-debian-10.3-console-armhf-2020-03-12-2gb*
24bfaeac8d90ebd36790ba4c04a4117fe8c2e7aa28de5d1ff0a5ab164e32bb90  am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX


Debian Configuration

Install Latest Kernel Image

General apt syntax for searching and installing a specific kernel:

sudo apt-get update
sudo apt-cache search linux-image | grep <branch>
sudo apt-get install linux-image-<specific version>
sudo reboot

Latest kernel script

cd /opt/scripts/tools/
git pull
sudo ./update_kernel.sh <OPTIONS>

4.19.x-ti

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.19
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.19.y
4.19.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
--ti-channel --lts-4_19
4.19.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
--ti-rt-channel --lts-4_19

Mainline (4.19.x lts)

4.19.x BeagleBone/BeagleBone Black
--bone-kernel --lts-4_19
4.19.x BeagleBone/BeagleBone Black + RT
--bone-rt-kernel --lts-4_19

Debian 9: stretch

sudo apt-get install linux-image-armmp

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

A page is dedicated for the installation and use of the graphics accelerator.

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade