Latest revision as of 22:01, 29 May 2020

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Note: Original Beagleboards work with the Debian Console image booted via holding user button down. Last tested 05/2020. Ref: https://github.com/beagleboard/Latest-Images/issues/48

Help

If you need any help:

Kernel related help:
- Email Beagleboard user group *Recommended method
- #beagle: Beagle irc on freenode, accessible also by web interface (logs)
- Kernel Trees

When asking for help, please provide some debugging information:
- U-Boot Version installed on board
- Kernel Version: uname -a
- pastebin dmesg
  - Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

http://beagleboard.org/source

Recommended Beagle Software

Mainline U-Boot:

All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard-xM --dtb omap3-beagle-xm
BeagleBoard-X15 --dtb am57xx-beagle-x15
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB

Debian 10 (buster)

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro stretch

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro stretch

Options:
- --firmware : installs firmware
- --serial-mode : debian-installer uses Serial Port

Demo Image

Advanced Users only: BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v5.4.x -b tmp
./build_kernel.sh

Advanced Users only: BeagleBone/BeagleBone Black/PocketBeagle: Kernel v4.19.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.19.y

git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.19.y -b tmp
./build_kernel.sh

Debian (buster)

Default username/password:

username: debian
password: temppwd

Image Updated:

2020-03-12
- BeagleBoard xM: v5.4.24-armv7-x20 kernel
- All BeagleBone Variants and PocketBeagle: v4.19.94-ti-r36 kernel
- BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
2019-04-10
- BeagleBoard xM: v4.19.31-armv7-x31 kernel
- All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
- BeagleBoard-X15: v4.14.108-ti-r104 kernel
2018-12-10
- BeagleBoard xM: v4.19.8-armv7-x11 kernel
- All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel
- BeagleBoard-X15: v4.14.79-ti-r84 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) (Windows/Linux) http://192.168.7.2, (Mac/Linux) http://192.168.6.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) (Windows/Linux) debian@192.168.7.2, (Mac/Linux) debian@192.168.6.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/elinux/debian-10.3-console-armhf-2020-03-12.tar.xz

Verify Image with:

sha256sum debian-10.3-console-armhf-2020-03-12.tar.xz
b6f1ca53d67554d0381ca59fe9ecd50b5013a073abd2b2e133aa8be1784cdbc6  debian-10.3-console-armhf-2020-03-12.tar.xz

Unpack Image:

tar xf debian-10.3-console-armhf-2020-03-12.tar.xz
cd debian-10.3-console-armhf-2020-03-12

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part

In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
BeagleBoard xM - omap3-beagle-xm
All BeagleBone Variants - beaglebone
OMAP5432 uEVM - omap5-uevm
BeagleBoard-X15 (BeagleBone AI) - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2020.03 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_buster_armhf

Flasher

eMMC: All BeagleBone Variants with eMMC

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On boot-up the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the Ethernet jack. Progress is reported on both the serial debug and HDMI connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

2020-03-12
- All BeagleBone Variants with eMMC: v4.19.94-ti-r36 kernel
2019-04-10
- All BeagleBone Variants with eMMC: v4.14.108-ti-r104 kernel
2018-12-10
- All BeagleBone Variants with eMMC: v4.14.79-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/flasher/bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb*
12a449c3426d811765e8ef0236ae3ddc74fc645a482640984435452929ebf55d  bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX

eMMC: BeagleBoard-X15 and BeagleBone AI

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On boot-up the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the Ethernet jack. Progress is reported on both the serial debug and HDMI connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

2020-03-12
- BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
2019-04-10
- BeagleBoard-X15 (and BeagleBone AI): v4.14.108-ti-r104 kernel
2018-12-10
- BeagleBoard-X15 (and BeagleBone AI): v4.14.79-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/flasher/am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb*
b2d4600cfbeaad90e9d634f8f9671be1223d235e6581aac82897d3f28076d338  am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX

raw microSD img

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

2020-03-12
- BeagleBoard xM: v5.4.24-armv7-x20 kernel
2019-04-10
- BeagleBoard xM: v4.19.31-armv7-x31 kernel
2018-12-10
- BeagleBoard xM: v4.19.8-armv7-x11 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/microsd/bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum bbxm-debian-10.3-console-armhf-2020-03-12-2gb*
864cd6a45179e87c68087150597e18a1c12c81621da7735ee8d5c35094423845  bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX

All BeagleBone Variants and PocketBeagle

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

2020-03-12
- All BeagleBone Variants and PocketBeagle: v4.19.94-ti-r36 kernel
2019-04-10
- All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
2018-12-10
- All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/microsd/bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum bone-debian-10.3-console-armhf-2020-03-12-2gb*
6d898c473edc8a50597ed7da8342c899d88e07b8a6b4c7c143257e947cb5f52d  bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX

BeagleBoard-X15 and BeagleBone AI

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

2020-03-12
- BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
2019-04-10
- BeagleBoard-X15 (and BeagleBone AI): v4.14.108-ti-r104 kernel
2018-12-10
- BeagleBoard-X15 (and BeagleBone AI): v4.14.79-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/microsd/am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum am57xx-debian-10.3-console-armhf-2020-03-12-2gb*
24bfaeac8d90ebd36790ba4c04a4117fe8c2e7aa28de5d1ff0a5ab164e32bb90  am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX

Debian Configuration

Install Latest Kernel Image

General apt syntax for searching and installing a specific kernel:

sudo apt-get update
sudo apt-cache search linux-image | grep <branch>
sudo apt-get install linux-image-<specific version>
sudo reboot

Latest kernel script

cd /opt/scripts/tools/
git pull
sudo ./update_kernel.sh <OPTIONS>

4.19.x-ti

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.19
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.19.y

4.19.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
--ti-channel --lts-4_19

4.19.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
--ti-rt-channel --lts-4_19

Mainline (4.19.x lts)

4.19.x BeagleBone/BeagleBone Black
--bone-kernel --lts-4_19

4.19.x BeagleBone/BeagleBone Black + RT
--bone-rt-kernel --lts-4_19

Debian 9: stretch

sudo apt-get install linux-image-armmp

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

A page is dedicated for the installation and use of the graphics accelerator.

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade

@@ Line 4: / Line 4: @@
 [[Category: BeagleBoard]]
 This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
+Note: Original Beagleboards work with the Debian Console image booted via holding user button down. Last tested 05/2020. Ref: https://github.com/beagleboard/Latest-Images/issues/48
 = Help =
@@ Line 13: / Line 15: @@
 ** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 ** Kernel Trees
-*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.17.x kernel branch]
+*** [https://github.com/RobertCNelson/armv7-multiplatform/ v5.4.x kernel branch]
 *** [https://github.com/RobertCNelson/bb-kernel/ BeagleBone]
 *** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
@@ Line 41: / Line 43: @@
 Device Options:
   BeagleBoard --dtb omap3-beagle
-  BeagleBoard xM --dtb omap3-beagle-xm
+  BeagleBoard-xM --dtb omap3-beagle-xm
+ BeagleBoard-X15 --dtb am57xx-beagle-x15
   BeagleBone (serial) --dtb am335x-bone-serial
   BeagleBone (video via cape) --dtb am335x-bone-video
@@ Line 52: / Line 55: @@
   Standard System : ~455MB
-== Debian 8 (jessie) ==
+== Debian 10 (buster) ==
 Quick Install script for "board"
-  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie
+  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro stretch
 So For the BeagleBoard xM:
-  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
+  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro stretch
 *Options:
@@ Line 66: / Line 69: @@
 = Demo Image =
-* '''Advanced Users only''': Beagle xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
+* '''Advanced Users only''': BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
   git clone https://github.com/RobertCNelson/armv7-multiplatform.git
   cd armv7-multiplatform
-  git checkout origin/v4.1.x -b tmp
+  git checkout origin/v5.4.x -b tmp
   ./build_kernel.sh
-* '''Advanced Users only''': BeagleBone/BeagleBone Black:  Kernel v4.1.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.1.y
+* '''Advanced Users only''': BeagleBone/BeagleBone Black/PocketBeagle:  Kernel v4.19.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.19.y
   git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
   cd ti-linux-kernel-dev
-  git checkout origin/ti-linux-4.1.y -b tmp
+  git checkout origin/ti-linux-4.19.y -b tmp
   ./build_kernel.sh
-== Debian (jessie) ==
+== Debian (buster) ==
 Default username/password:
@@ Line 84: / Line 87: @@
 Image Updated:
-*2015-08-17
+*2020-03-12
-** Beagle/Beagle xM: v4.1.5-armv7-x2 kernel
+** BeagleBoard xM: v5.4.24-armv7-x20 kernel
-** BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel
+** All BeagleBone Variants and PocketBeagle: v4.19.94-ti-r36 kernel
-** OMAP5432 uEVM: v4.1.5-ti-r10 kernel
+** BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
-** BeagleBoard-X15: v4.1.5-ti-r10 kernel
+*2019-04-10
-*2015-07-08
+** BeagleBoard xM: v4.19.31-armv7-x31 kernel
-** Beagle/Beagle xM: v4.1.1-armv7-x1 kernel
+** All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
-** BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
+** BeagleBoard-X15: v4.14.108-ti-r104 kernel
-** OMAP5432 uEVM: v4.1.1-ti-r2 kernel
+*2018-12-10
-** BeagleBoard-X15: v4.1.1-ti-r2 kernel
+** BeagleBoard xM: v4.19.8-armv7-x11 kernel
-*2015-06-11
+** All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel
-** Beagle/Beagle xM: v4.1.0-rc7-armv7-x0 kernel
+** BeagleBoard-X15: v4.14.79-ti-r84 kernel
-** BeagleBone/BeagleBone Black: v3.14.43-ti-r67 kernel
-** OMAP5432 uEVM: v3.14.43-ti-r67 kernel
-** BeagleBoard-X15: v3.14.43-ti-r67 kernel
 Services Active:
   Note: Depending on your internal network these may work out of the box
-  Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
+  Apache, Port 80: http://arm.local/ (Bone: via usb) (Windows/Linux) http://192.168.7.2, (Mac/Linux) http://192.168.6.2
-  SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
+  SSH, Port 22: ssh debian@arm.local (Bone: via usb) (Windows/Linux) debian@192.168.7.2, (Mac/Linux) debian@192.168.6.2
   Getty, Serial Port
@@ Line 109: / Line 109: @@
 Get prebuilt image:
-  wget https://rcn-ee.com/rootfs/2015-08-17/elinux/debian-8.1-console-armhf-2015-08-17.tar.xz
+  wget https://rcn-ee.com/rootfs/2020-03-12/elinux/debian-10.3-console-armhf-2020-03-12.tar.xz
 Verify Image with:
-  md5sum debian-8.1-console-armhf-2015-08-17.tar.xz
+  sha256sum debian-10.3-console-armhf-2020-03-12.tar.xz
-c5498760ae704885281a9026e4a4  debian-8.1-console-armhf-2015-08-17.tar.xz
+  b6f1ca53d67554d0381ca59fe9ecd50b5013a073abd2b2e133aa8be1784cdbc6  debian-10.3-console-armhf-2020-03-12.tar.xz
 Unpack Image:
-  tar xf debian-8.1-console-armhf-2015-08-17.tar.xz
+  tar xf debian-10.3-console-armhf-2020-03-12.tar.xz
-  cd debian-8.1-console-armhf-2015-08-17
+  cd debian-10.3-console-armhf-2020-03-12
 If you don't know the location of your SD card:
@@ Line 150: / Line 150: @@
 *BeagleBoard Ax/Bx/Cx/Dx          - omap3-beagle
 *BeagleBoard xM                   - omap3-beagle-xm
-*BeagleBone White/Black/Green     - beaglebone
+*All BeagleBone Variants          - beaglebone
 *OMAP5432 uEVM                    - omap5-uevm
-*BeagleBoard-X15                  - am57xx-beagle-x15
+*BeagleBoard-X15 (BeagleBone AI)  - am57xx-beagle-x15
 So for the BeagleBoard xM:
@@ Line 161: / Line 161: @@
   git clone https://github.com/RobertCNelson/omap-image-builder.git
   cd omap-image-builder
-  git checkout v2015.08 -b tmp
+  git checkout v2020.03 -b tmp
 Stable:
-  ./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf
+  ./RootStock-NG.sh -c rcn-ee_console_debian_buster_armhf
-Testing:
- ./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf
-== Debian Testing (stretch) ==
-Image Updated:
-*2015-08-17
-** Beagle/Beagle xM: v4.1.5-armv7-x2 kernel
-** BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel
-** OMAP5432 uEVM: v4.1.5-ti-r10 kernel
-** BeagleBoard-X15: v4.1.5-ti-r10 kernel
-*2015-07-08
-** Beagle/Beagle xM: v4.1.1-armv7-x1 kernel
-** BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
-** OMAP5432 uEVM: v4.1.1-ti-r2 kernel
-** BeagleBoard-X15: v4.1.1-ti-r2 kernel
-*2015-06-11
-** Beagle/Beagle xM: v4.1.0-rc7-armv7-x0 kernel
-** BeagleBone/BeagleBone Black: v3.14.43-ti-r67 kernel
-** OMAP5432 uEVM: v3.14.43-ti-r67 kernel
-** BeagleBoard-X15: v3.14.43-ti-r67 kernel
-Get prebuilt image:
- wget https://rcn-ee.com/rootfs/2015-08-17/elinux/debian-stretch-console-armhf-2015-08-17.tar.xz
-Verify Image with:
- md5sum debian-stretch-console-armhf-2015-08-17.tar.xz
- b10a5e002914fed3914e395591bf23c2  debian-stretch-console-armhf-2015-08-17.tar.xz
-Unpack image:
- tar xf debian-stretch-console-armhf-2015-08-17.tar.xz
- cd debian-stretch-console-armhf-2015-08-17
-Then follow the directions shown above with the other images...
 = Flasher =
-== eMMC: BeagleBone Black/Green ==
+== eMMC: All BeagleBone Variants with eMMC ==
-This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io  First press and hold the boot select button (next to the microSD card), then apply power. On boot-up the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the Ethernet jack. Progress is reported on both the serial debug and HDMI connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
 Script for reference: (this is the script that writes to the eMMC)
@@ Line 222: / Line 186: @@
 Image Updated:
-*2015-08-17
+*2020-03-12
-** BeagleBone Black/Green: v4.1.5-ti-r10 kernel
+** All BeagleBone Variants with eMMC: v4.19.94-ti-r36 kernel
-*2015-07-08
+*2019-04-10
-** BeagleBone Black/Green: v4.1.1-ti-r2 kernel
+** All BeagleBone Variants with eMMC: v4.14.108-ti-r104 kernel
-*2015-06-11
+*2018-12-10
-** BeagleBone Black/Green: v3.14.43-ti-r67 kernel
+** All BeagleBone Variants with eMMC: v4.14.79-ti-r84 kernel
 Get prebuilt image:
-  wget https://rcn-ee.com/rootfs/2015-08-17/flasher/BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
+  wget https://rcn-ee.com/rootfs/2020-03-12/flasher/bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
- wget https://rcn-ee.com/rootfs/2015-08-17/flasher/BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.bmap
 Verify Image with:
-  md5sum BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb*
+  sha256sum bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb*
-  c4bb38cb3aa760ad75e8ef5272b33b0c  BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.bmap
+a449c3426d811765e8ef0236ae3ddc74fc645a482640984435452929ebf55d  bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
-ca10baec660c293429f25cfc6990617  BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
-Linux: (bmaptool 3.2)
+Windows/Mac/Linux gui
-  sudo bmaptool copy --bmap BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
+  http://etcher.io
- BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
 Linux: (dd)
-  unxz BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
+  xzcat bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
- sudo dd if=./BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX
-= raw microSD img =
+== eMMC: BeagleBoard-X15 and BeagleBone AI ==
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io  First press and hold the boot select button (next to the microSD card), then apply power. On boot-up the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the Ethernet jack. Progress is reported on both the serial debug and HDMI connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
+Script for reference: (this is the script that writes to the eMMC)
+ https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
-== BeagleBoard (classic) ==
+This script will only take about 5-6 Minutes after power on.
-This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
+Notes:
+* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
+* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
 User: debian
 pass: temppwd
-Auto partition resize:
- cd /opt/scripts/tools
- git pull
- ./grow_partition.sh
- sudo reboot
 Image Updated:
-*2015-08-17
+*2020-03-12
-** Beagle: v4.1.5-armv7-x2 kernel
+** BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
-*2015-07-08
+*2019-04-10
-** Beagle: v4.1.1-armv7-x1 kernel
+** BeagleBoard-X15 (and BeagleBone AI): v4.14.108-ti-r104 kernel
-*2015-06-11
+*2018-12-10
-** Beagle: v4.1.0-rc7-armv7-x0 kernel
+** BeagleBoard-X15 (and BeagleBone AI): v4.14.79-ti-r84 kernel
 Get prebuilt image:
-  wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
+  wget https://rcn-ee.com/rootfs/2020-03-12/flasher/am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
- wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bb-debian-8.1-console-armhf-2015-08-17-2gb.bmap
 Verify Image with:
-  md5sum bb-debian-8.1-console-armhf-2015-08-17-2gb*
+  sha256sum am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb*
-cbd47261bdd1b876e829c062789233a  bb-debian-8.1-console-armhf-2015-08-17-2gb.bmap
+  b2d4600cfbeaad90e9d634f8f9671be1223d235e6581aac82897d3f28076d338  am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
-cbd47261bdd1b876e829c062789233a  bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
-Linux: (bmaptool 3.2)
+Windows/Mac/Linux gui
-  sudo bmaptool copy --bmap bb-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
+  http://etcher.io
- bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
 Linux: (dd)
-  unxz bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
+  xzcat am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
- sudo dd if=./bb-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX
+= raw microSD img =
 == BeagleBoard xM ==
-This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io
 User: debian
@@ Line 300: / Line 259: @@
 Image Updated:
-*2015-08-17
+*2020-03-12
-** Beagle xM: v4.1.5-armv7-x2 kernel
+** BeagleBoard xM: v5.4.24-armv7-x20 kernel
-*2015-07-08
+*2019-04-10
-** Beagle xM: v4.1.1-armv7-x1 kernel
+** BeagleBoard xM: v4.19.31-armv7-x31 kernel
-*2015-06-11
+*2018-12-10
-** Beagle xM: v4.1.0-rc7-armv7-x0 kernel
+** BeagleBoard xM: v4.19.8-armv7-x11 kernel
 Get prebuilt image:
-  wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
+  wget https://rcn-ee.com/rootfs/2020-03-12/microsd/bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
- wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbxm-debian-8.1-console-armhf-2015-08-17-2gb.bmap
 Verify Image with:
-  md5sum bbxm-debian-8.1-console-armhf-2015-08-17-2gb*
+  sha256sum bbxm-debian-10.3-console-armhf-2020-03-12-2gb*
-  b0b8f64aac92f5cc280413a80b959a6d  bbxm-debian-8.1-console-armhf-2015-08-17-2gb.bmap
+cd6a45179e87c68087150597e18a1c12c81621da7735ee8d5c35094423845  bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
- b042dec7d980562cfbb4414ad5ce5cde  bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
-Linux: (bmaptool 3.2)
+Windows/Mac/Linux gui
-  sudo bmaptool copy --bmap bbxm-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
+  http://etcher.io
- bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
 Linux: (dd)
-  unxz bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
+  xzcat bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
- sudo dd if=./bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX
-== BeagleBone White/Black/Green ==
+== All BeagleBone Variants and PocketBeagle==
-This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io
 User: debian
@@ Line 338: / Line 293: @@
 Image Updated:
-*2015-08-17
+*2020-03-12
-** BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel
+** All BeagleBone Variants and PocketBeagle: v4.19.94-ti-r36 kernel
-*2015-07-08
+*2019-04-10
-** BeagleBone White/Black/Green: v4.1.1-ti-r2 kernel
+** All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
-*2015-06-11
+*2018-12-10
-** BeagleBone White/Black/Green: v3.14.43-ti-r67 kernel
+** All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel
 Get prebuilt image:
-  wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
+  wget https://rcn-ee.com/rootfs/2020-03-12/microsd/bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
- wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bone-debian-8.1-console-armhf-2015-08-17-2gb.bmap
 Verify Image with:
-  md5sum bone-debian-8.1-console-armhf-2015-08-17-2gb*
+  sha256sum bone-debian-10.3-console-armhf-2020-03-12-2gb*
-  0561042d4f3cf806fbbd88d84777bbc4  bone-debian-8.1-console-armhf-2015-08-17-2gb.bmap
+d898c473edc8a50597ed7da8342c899d88e07b8a6b4c7c143257e947cb5f52d  bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
-cda9556caf4e6ba81421d6d5ba8f3d  bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
-Linux: (bmaptool 3.2)
+Windows/Mac/Linux gui
-  sudo bmaptool copy --bmap bone-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
+  http://etcher.io
- bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
 Linux: (dd)
-  unxz bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
+  xzcat bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
- sudo dd if=./bone-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX
-== OMAP5432 uEVM ==
+== BeagleBoard-X15 and BeagleBone AI==
-This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io
 User: debian
@@ Line 376: / Line 327: @@
 Image Updated:
-*2015-08-17
+*2020-03-12
-** OMAP5432 uEVM: v4.1.5-ti-r10 kernel
+** BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
-*2015-07-08
+*2019-04-10
-** OMAP5432 uEVM: v4.1.1-ti-r2 kernel
+** BeagleBoard-X15 (and BeagleBone AI): v4.14.108-ti-r104 kernel
-*2015-06-11
+*2018-12-10
-** OMAP5432 uEVM: v3.14.43-ti-r67 kernel
+** BeagleBoard-X15 (and BeagleBone AI): v4.14.79-ti-r84 kernel
 Get prebuilt image:
-  wget https://rcn-ee.com/rootfs/2015-08-17/microsd/omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
+  wget https://rcn-ee.com/rootfs/2020-03-12/microsd/am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
- wget https://rcn-ee.com/rootfs/2015-08-17/microsd/omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.bmap
 Verify Image with:
-  md5sum omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb*
+  sha256sum am57xx-debian-10.3-console-armhf-2020-03-12-2gb*
-  d03f202299266eec0ef9d730aec6c77a  omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.bmap
+bfaeac8d90ebd36790ba4c04a4117fe8c2e7aa28de5d1ff0a5ab164e32bb90  am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
-a0dd02bc637345a8891b75d5c5899bb  omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
-Linux: (bmaptool 3.2)
+Windows/Mac/Linux gui
-  sudo bmaptool copy --bmap omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
+  http://etcher.io
- omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
 Linux: (dd)
-  unxz omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
+  xzcat am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
- sudo dd if=./omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX
-== BeagleBoard-X15 ==
-This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
+= Debian Configuration =
-User: debian
+==Install Latest Kernel Image==
-pass: temppwd
-Auto partition resize:
+General apt syntax for searching and installing a specific kernel:
-  cd /opt/scripts/tools
+  sudo apt-get update
-  git pull
+  sudo apt-cache search linux-image | grep <branch>
-  ./grow_partition.sh
+  sudo apt-get install linux-image-<specific version>
   sudo reboot
-Image Updated:
+Latest kernel script
-*2015-08-17
+ cd /opt/scripts/tools/
-** BeagleBoard-X15: v4.1.5-ti-r10 kernel
+ git pull
-*2015-07-08
+ sudo ./update_kernel.sh <OPTIONS>
-** BeagleBoard-X15: v4.1.1-ti-r2 kernel
-*2015-06-11
-** BeagleBoard-X15: v3.14.43-ti-r67 kernel
-Get prebuilt image:
+== 4.19.x-ti ==
-  wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
+  beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.19
-  wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbx15-debian-8.1-console-armhf-2015-08-17-2gb.bmap
+  Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.19.y
-Verify Image with:
+.19.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
-  md5sum bbx15-debian-8.1-console-armhf-2015-08-17-2gb*
+  --ti-channel --lts-4_19
-cf783d5cbd302d0d669cd94ea90c  bbx15-debian-8.1-console-armhf-2015-08-17-2gb.bmap
-f87f3e62d22386714214027a9d4  bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
-Linux: (bmaptool 3.2)
+.19.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
- sudo bmaptool copy --bmap bbx15-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
+  --ti-rt-channel --lts-4_19
-  bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
-Linux: (dd)
+== Mainline (4.19.x lts) ==
- unxz bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
- sudo dd if=./bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX
-= Debian Configuration =
+.19.x BeagleBone/BeagleBone Black
+ --bone-kernel --lts-4_19
-==Install Latest Kernel Image==
+.19.x BeagleBone/BeagleBone Black + RT
+ --bone-rt-kernel --lts-4_19
-Script:
+== Debian 9: stretch ==
-  cd /opt/scripts/tools
+  sudo apt-get install linux-image-armmp
- git pull
-Stable:
- ./update_kernel.sh
-Testing:
- ./update_kernel.sh --beta-kernel
-Custom: (has to be on rcn-ee.net)
- ./update_kernel.sh --kernel v3.8.13-bone69
 Reboot with your new Kernel Image.
@@ Line 475: / Line 404: @@
 === SGX BeagleBone/BeagleBone Black ===
-Note, these are FBDEV only, no xorg/x11/etc...
+[[BeagleBoneBlack/SGX_%2B_Qt_EGLFS_%2B_Weston|A page is dedicated for the installation and use of the graphics accelerator]].
-Install sgx modules (3.14.x-ti or 4.1.x kernel):
- sudo apt-get install ti-sgx-es8-modules-`uname -r`
- sudo depmod -a `uname -r`
- sudo update-initramfs -uk `uname -r`
-Build SGX userspace for 3.14.x-ti (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
- git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
- cd ti-linux-kernel-dev/
- git checkout origin/ti-linux-3.14.y -b tmp-sgx
- ./sgx_create_package.sh
-Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
- git clone https://github.com/RobertCNelson/bb-kernel.git
- cd bb-kernel/
- git checkout origin/am33x-v4.1 -b tmp-sgx
- ./sgx_create_package.sh
-Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
- sudo tar xfv GFX_5.01.01.02.tar.gz -C /
- cd /opt/gfxinstall/
- sudo ./sgx-install.sh
- sudo reboot
-Verify omaplfb & pvrsrvkm loaded
- debian@arm:~$ lsmod | grep omaplfb
- omaplfb                12065  0
- pvrsrvkm              178782  1 omaplfb
 = Building Kernel =

Difference between revisions of "BeagleBoardDebian"

Latest revision as of 22:01, 29 May 2020

Contents

Help

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Debian NetInstall

Debian 10 (buster)

Demo Image

Debian (buster)

Flasher

eMMC: All BeagleBone Variants with eMMC

eMMC: BeagleBoard-X15 and BeagleBone AI

raw microSD img

BeagleBoard xM

All BeagleBone Variants and PocketBeagle

BeagleBoard-X15 and BeagleBone AI

Debian Configuration

Install Latest Kernel Image

4.19.x-ti

Mainline (4.19.x lts)

Debian 9: stretch

Xorg Drivers

SGX Drivers

SGX BeagleBone/BeagleBone Black

Building Kernel

Beagle/Beagle xM

BeagleBone

BeagleBone Black

Panda/Panda ES

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Navigation menu

Search