Difference between revisions of "BeagleBoardDebian"
m (→Debian 8 (jessie)) |
m (2017-07-14) |
||
Line 13: | Line 13: | ||
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs]) | ** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs]) | ||
** Kernel Trees | ** Kernel Trees | ||
− | *** [https://github.com/RobertCNelson/armv7-multiplatform/ v4. | + | *** [https://github.com/RobertCNelson/armv7-multiplatform/ v4.12.x kernel branch] |
*** [https://github.com/RobertCNelson/bb-kernel/ BeagleBone] | *** [https://github.com/RobertCNelson/bb-kernel/ BeagleBone] | ||
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code] | *** [https://github.com/RobertCNelson/linux-dev Development Kernel source code] | ||
Line 70: | Line 70: | ||
git clone https://github.com/RobertCNelson/armv7-multiplatform.git | git clone https://github.com/RobertCNelson/armv7-multiplatform.git | ||
cd armv7-multiplatform | cd armv7-multiplatform | ||
− | git checkout origin/v4. | + | git checkout origin/v4.12.x -b tmp |
./build_kernel.sh | ./build_kernel.sh | ||
* '''Advanced Users only''': BeagleBone/BeagleBone Black: Kernel v4.4.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.4.y | * '''Advanced Users only''': BeagleBone/BeagleBone Black: Kernel v4.4.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.4.y | ||
Line 78: | Line 78: | ||
./build_kernel.sh | ./build_kernel.sh | ||
− | == Debian ( | + | == Debian (stretch) == |
Default username/password: | Default username/password: | ||
Line 85: | Line 85: | ||
Image Updated: | Image Updated: | ||
− | *2017- | + | *2017-07-14 |
− | ** BeagleBoard xM: v4. | + | ** BeagleBoard xM: v4.12.1-armv7-x2 kernel |
− | ** All BeagleBone Varients: v4.4.68-ti- | + | ** All BeagleBone Varients: v4.4.68-ti-r111 kernel |
− | ** OMAP5432 uEVM: v4.4.68-ti- | + | ** OMAP5432 uEVM: v4.4.68-ti-r111 kernel |
− | ** BeagleBoard-X15: v4.4.68-ti- | + | ** BeagleBoard-X15: v4.4.68-ti-r111 kernel |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
Services Active: | Services Active: | ||
Line 110: | Line 100: | ||
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/2017- | + | wget https://rcn-ee.com/rootfs/2017-07-14/elinux/debian-9.0-console-armhf-2017-07-14.tar.xz |
Verify Image with: | Verify Image with: | ||
− | sha256sum debian- | + | sha256sum debian-9.0-console-armhf-2017-07-14.tar.xz |
− | + | d6d5b4f304d810efeefb3aed7d8927f2f4cd35d9061f63a1fc8e7d71d04acf66 debian-9.0-console-armhf-2017-07-14.tar.xz | |
Unpack Image: | Unpack Image: | ||
− | tar xf debian- | + | tar xf debian-9.0-console-armhf-2017-07-14.tar.xz |
− | cd debian- | + | cd debian-9.0-console-armhf-2017-07-14 |
If you don't know the location of your SD card: | If you don't know the location of your SD card: | ||
Line 162: | Line 152: | ||
git clone https://github.com/RobertCNelson/omap-image-builder.git | git clone https://github.com/RobertCNelson/omap-image-builder.git | ||
cd omap-image-builder | cd omap-image-builder | ||
− | git checkout v2017. | + | git checkout v2017.07 -b tmp |
Stable: | Stable: | ||
− | |||
− | |||
− | |||
− | |||
./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf | ./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
= Flasher = | = Flasher = | ||
Line 223: | Line 177: | ||
Image Updated: | Image Updated: | ||
− | *2017- | + | *2017-07-14 |
− | ** All BeagleBone Varients with eMMC: v4.4.68-ti- | + | ** All BeagleBone Varients with eMMC: v4.4.68-ti-r111 kernel |
− | |||
− | |||
− | |||
− | |||
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/2017- | + | wget https://rcn-ee.com/rootfs/2017-07-14/flasher/BBB-eMMC-flasher-debian-9.0-console-armhf-2017-07-14-2gb.img.xz |
Verify Image with: | Verify Image with: | ||
− | sha256sum BBB-eMMC-flasher-debian- | + | sha256sum BBB-eMMC-flasher-debian-9.0-console-armhf-2017-07-14-2gb* |
− | + | 1ce04f181a5f8db04c4e524af62eae31984dd71f70bdf1d2e594a4342ec3399d BBB-eMMC-flasher-debian-9.0-console-armhf-2017-07-14-2gb.img.xz | |
Windows/Mac/Linux gui | Windows/Mac/Linux gui | ||
Line 241: | Line 191: | ||
Linux: (dd) | Linux: (dd) | ||
− | xzcat BBB-eMMC-flasher-debian- | + | xzcat BBB-eMMC-flasher-debian-9.0-console-armhf-2017-07-14-2gb.img.xz | sudo dd of=/dev/sdX |
== eMMC: BeagleBoard-X15 == | == eMMC: BeagleBoard-X15 == | ||
Line 260: | Line 210: | ||
Image Updated: | Image Updated: | ||
− | *2017- | + | *2017-07-14 |
− | ** BeagleBoard-X15: v4.4.68-ti- | + | ** BeagleBoard-X15: v4.4.68-ti-r111 kernel |
− | |||
− | |||
− | |||
− | |||
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/2017- | + | wget https://rcn-ee.com/rootfs/2017-07-14/flasher/bbx15-eMMC-flasher-debian-9.0-console-armhf-2017-07-14-2gb.img.xz |
Verify Image with: | Verify Image with: | ||
− | sha256sum bbx15-eMMC-flasher-debian- | + | sha256sum bbx15-eMMC-flasher-debian-9.0-console-armhf-2017-07-14-2gb* |
− | + | f1238f676866842b5decbdff8b8cf09e4023a1f36d81f212e3fe9ef698c7e3e9 bbx15-eMMC-flasher-debian-9.0-console-armhf-2017-07-14-2gb.img.xz | |
Windows/Mac/Linux gui | Windows/Mac/Linux gui | ||
Line 278: | Line 224: | ||
Linux: (dd) | Linux: (dd) | ||
− | xzcat bbx15-eMMC-flasher-debian- | + | xzcat bbx15-eMMC-flasher-debian-9.0-console-armhf-2017-07-14-2gb.img.xz | sudo dd of=/dev/sdX |
= raw microSD img = | = raw microSD img = | ||
Line 296: | Line 242: | ||
Image Updated: | Image Updated: | ||
− | *2017- | + | *2017-07-14 |
− | ** BeagleBoard xM: v4. | + | ** BeagleBoard xM: v4.12.1-armv7-x2 kernel |
− | |||
− | |||
− | |||
− | |||
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/2017- | + | wget https://rcn-ee.com/rootfs/2017-07-14/microsd/bbxm-debian-9.0-console-armhf-2017-07-14-2gb.img.xz |
Verify Image with: | Verify Image with: | ||
− | sha256sum bbxm-debian- | + | sha256sum bbxm-debian-9.0-console-armhf-2017-07-14-2gb* |
− | + | d867aedd18eb7716a165bb023bdeb56d5f7d81b592209b4819f3410b62399049 bbxm-debian-9.0-console-armhf-2017-07-14-2gb.img.xz | |
Windows/Mac/Linux gui | Windows/Mac/Linux gui | ||
Line 314: | Line 256: | ||
Linux: (dd) | Linux: (dd) | ||
− | xzcat bbxm-debian- | + | xzcat bbxm-debian-9.0-console-armhf-2017-07-14-2gb.img.xz | sudo dd of=/dev/sdX |
== All BeagleBone Varients == | == All BeagleBone Varients == | ||
Line 330: | Line 272: | ||
Image Updated: | Image Updated: | ||
− | *2017- | + | *2017-07-14 |
− | ** All BeagleBone Varients: v4.4.68-ti- | + | ** All BeagleBone Varients: v4.4.68-ti-r111 kernel |
− | |||
− | |||
− | |||
− | |||
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/2017- | + | wget https://rcn-ee.com/rootfs/2017-07-14/microsd/bone-debian-9.0-console-armhf-2017-07-14-2gb.img.xz |
Verify Image with: | Verify Image with: | ||
− | sha256sum bone-debian- | + | sha256sum bone-debian-9.0-console-armhf-2017-07-14-2gb* |
− | + | 5fb430ce843dd5d4acf2aa77b101ffdfde62dc949c93b21a45860a42c2339eae bone-debian-9.0-console-armhf-2017-07-14-2gb.img.xz | |
Windows/Mac/Linux gui | Windows/Mac/Linux gui | ||
Line 348: | Line 286: | ||
Linux: (dd) | Linux: (dd) | ||
− | xzcat bone-debian- | + | xzcat bone-debian-9.0-console-armhf-2017-07-14-2gb.img.xz | sudo dd of=/dev/sdX |
== OMAP5432 uEVM == | == OMAP5432 uEVM == | ||
Line 364: | Line 302: | ||
Image Updated: | Image Updated: | ||
− | *2017- | + | *2017-07-14 |
− | ** OMAP5432 uEVM: v4.4.68-ti- | + | ** OMAP5432 uEVM: v4.4.68-ti-r111 kernel |
− | |||
− | |||
− | |||
− | |||
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/2017- | + | wget https://rcn-ee.com/rootfs/2017-07-14/microsd/omap5-uevm-debian-9.0-console-armhf-2017-07-14-2gb.img.xz |
Verify Image with: | Verify Image with: | ||
− | sha256sum omap5-uevm-debian- | + | sha256sum omap5-uevm-debian-9.0-console-armhf-2017-07-14-2gb* |
− | + | d1f59760b40a74a9eb9d0387fa305563d1bee55385d97c0e6a618088a6355040 omap5-uevm-debian-9.0-console-armhf-2017-07-14-2gb.img.xz | |
Windows/Mac/Linux gui | Windows/Mac/Linux gui | ||
Line 382: | Line 316: | ||
Linux: (dd) | Linux: (dd) | ||
− | xzcat omap5-uevm-debian- | + | xzcat omap5-uevm-debian-9.0-console-armhf-2017-07-14-2gb.img.xz | sudo dd of=/dev/sdX |
== BeagleBoard-X15 == | == BeagleBoard-X15 == | ||
Line 398: | Line 332: | ||
Image Updated: | Image Updated: | ||
− | *2017- | + | *2017-07-14 |
− | ** BeagleBoard-X15: v4.4.68-ti- | + | ** BeagleBoard-X15: v4.4.68-ti-r111 kernel |
− | |||
− | |||
− | |||
− | |||
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/2017- | + | wget https://rcn-ee.com/rootfs/2017-07-14/microsd/bbx15-debian-9.0-console-armhf-2017-07-14-2gb.img.xz |
Verify Image with: | Verify Image with: | ||
− | sha256sum bbx15-debian- | + | sha256sum bbx15-debian-9.0-console-armhf-2017-07-14-2gb* |
− | + | 1c126c66aafd3cfd918aa9a1954afc2c69de7871234d0c17ed7e6e949dc85ab7 bbx15-debian-9.0-console-armhf-2017-07-14-2gb.img.xz | |
Windows/Mac/Linux gui | Windows/Mac/Linux gui | ||
Line 416: | Line 346: | ||
Linux: (dd) | Linux: (dd) | ||
− | xzcat bbx15-debian- | + | xzcat bbx15-debian-9.0-console-armhf-2017-07-14-2gb.img.xz | sudo dd of=/dev/sdX |
= Debian Configuration = | = Debian Configuration = |
Revision as of 13:26, 14 July 2017
This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.
Contents
- 1 Help
- 2 Official BeagleBoard.org Images for shipping with BeagleBone Black
- 3 Recommended Beagle Software
- 4 Debian NetInstall
- 5 Demo Image
- 6 Flasher
- 7 raw microSD img
- 8 Debian Configuration
- 9 Building Kernel
- 10 Upgrading from Debian 5 to Debian 6
- 11 Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)
Help
If you need any help:
- Kernel related help:
- Email Beagleboard user group *Recommended method
- #beagle: Beagle irc on freenode, accessible also by web interface (logs)
- Kernel Trees
- When asking for help, please provide some debugging information:
- U-Boot Version installed on board
- Kernel Version: uname -a
- pastebin dmesg
- Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
Official BeagleBoard.org Images for shipping with BeagleBone Black
Recommended Beagle Software
Mainline U-Boot:
- All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
- XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
- Directions: Upgrade X-loader and U-Boot
Debian NetInstall
Scripts:
git clone https://github.com/RobertCNelson/netinstall.git cd netinstall
Device Options:
BeagleBoard --dtb omap3-beagle BeagleBoard-xM --dtb omap3-beagle-xm BeagleBoard-X15 --dtb am57xx-beagle-x15 BeagleBone (serial) --dtb am335x-bone-serial BeagleBone (video via cape) --dtb am335x-bone-video BeagleBone Black --dtb am335x-boneblack PandaBoard (A1->A3) --dtb omap4-panda PandaBoard (A4->Ax) --dtb omap4-panda-a4 PandaBoard ES --dtb omap4-panda-es
You will need a 1GB SD card or greater.
Standard System : ~455MB
Debian 9 (stretch)
Quick Install script for "board"
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro stretch
So For the BeagleBoard xM:
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro stretch
- Options:
- --firmware : installs firmware
- --serial-mode : debian-installer uses Serial Port
Demo Image
- Advanced Users only: BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
git clone https://github.com/RobertCNelson/armv7-multiplatform.git cd armv7-multiplatform git checkout origin/v4.12.x -b tmp ./build_kernel.sh
- Advanced Users only: BeagleBone/BeagleBone Black: Kernel v4.4.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.4.y
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git cd ti-linux-kernel-dev git checkout origin/ti-linux-4.4.y -b tmp ./build_kernel.sh
Debian (stretch)
Default username/password:
- username: debian
- password: temppwd
Image Updated:
- 2017-07-14
- BeagleBoard xM: v4.12.1-armv7-x2 kernel
- All BeagleBone Varients: v4.4.68-ti-r111 kernel
- OMAP5432 uEVM: v4.4.68-ti-r111 kernel
- BeagleBoard-X15: v4.4.68-ti-r111 kernel
Services Active:
Note: Depending on your internal network these may work out of the box Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2 SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2 Getty, Serial Port
Default user: debian pass: temppwd
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2017-07-14/elinux/debian-9.0-console-armhf-2017-07-14.tar.xz
Verify Image with:
sha256sum debian-9.0-console-armhf-2017-07-14.tar.xz d6d5b4f304d810efeefb3aed7d8927f2f4cd35d9061f63a1fc8e7d71d04acf66 debian-9.0-console-armhf-2017-07-14.tar.xz
Unpack Image:
tar xf debian-9.0-console-armhf-2017-07-14.tar.xz cd debian-9.0-console-armhf-2017-07-14
If you don't know the location of your SD card:
sudo ./setup_sdcard.sh --probe-mmc
You should see something like:
Are you sure? I don't see [/dev/idontknow], here is what I do see... fdisk -l: Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card lsblk: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 465.8G 0 disk ├─sda1 8:1 0 446.9G 0 part / <- x86 Root Partition ├─sda2 8:2 0 1K 0 part └─sda5 8:5 0 18.9G 0 part [SWAP] sdd 8:48 1 3.7G 0 disk ├─sdd1 8:49 1 64M 0 part └─sdd2 8:50 1 3.6G 0 part
- In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
Install Image:
Quick install script for [board]
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
board options:
- BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
- BeagleBoard xM - omap3-beagle-xm
- All BeagleBone Varients - beaglebone
- OMAP5432 uEVM - omap5-uevm
- BeagleBoard-X15 - am57xx-beagle-x15
So for the BeagleBoard xM:
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
Advanced: Build Image:
git clone https://github.com/RobertCNelson/omap-image-builder.git cd omap-image-builder git checkout v2017.07 -b tmp
Stable:
./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf
Flasher
eMMC: All BeagleBone Varients with eMMC
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
Script for reference: (this is the script that writes to the eMMC)
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
This script will only take about 5-6 Minutes after power on.
Notes:
- If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
- If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
User: debian pass: temppwd
Image Updated:
- 2017-07-14
- All BeagleBone Varients with eMMC: v4.4.68-ti-r111 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2017-07-14/flasher/BBB-eMMC-flasher-debian-9.0-console-armhf-2017-07-14-2gb.img.xz
Verify Image with:
sha256sum BBB-eMMC-flasher-debian-9.0-console-armhf-2017-07-14-2gb* 1ce04f181a5f8db04c4e524af62eae31984dd71f70bdf1d2e594a4342ec3399d BBB-eMMC-flasher-debian-9.0-console-armhf-2017-07-14-2gb.img.xz
Windows/Mac/Linux gui
http://etcher.io
Linux: (dd)
xzcat BBB-eMMC-flasher-debian-9.0-console-armhf-2017-07-14-2gb.img.xz | sudo dd of=/dev/sdX
eMMC: BeagleBoard-X15
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
Script for reference: (this is the script that writes to the eMMC)
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
This script will only take about 5-6 Minutes after power on.
Notes:
- If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
- If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
User: debian pass: temppwd
Image Updated:
- 2017-07-14
- BeagleBoard-X15: v4.4.68-ti-r111 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2017-07-14/flasher/bbx15-eMMC-flasher-debian-9.0-console-armhf-2017-07-14-2gb.img.xz
Verify Image with:
sha256sum bbx15-eMMC-flasher-debian-9.0-console-armhf-2017-07-14-2gb* f1238f676866842b5decbdff8b8cf09e4023a1f36d81f212e3fe9ef698c7e3e9 bbx15-eMMC-flasher-debian-9.0-console-armhf-2017-07-14-2gb.img.xz
Windows/Mac/Linux gui
http://etcher.io
Linux: (dd)
xzcat bbx15-eMMC-flasher-debian-9.0-console-armhf-2017-07-14-2gb.img.xz | sudo dd of=/dev/sdX
raw microSD img
BeagleBoard xM
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
User: debian pass: temppwd
Auto partition resize:
cd /opt/scripts/tools git pull ./grow_partition.sh sudo reboot
Image Updated:
- 2017-07-14
- BeagleBoard xM: v4.12.1-armv7-x2 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2017-07-14/microsd/bbxm-debian-9.0-console-armhf-2017-07-14-2gb.img.xz
Verify Image with:
sha256sum bbxm-debian-9.0-console-armhf-2017-07-14-2gb* d867aedd18eb7716a165bb023bdeb56d5f7d81b592209b4819f3410b62399049 bbxm-debian-9.0-console-armhf-2017-07-14-2gb.img.xz
Windows/Mac/Linux gui
http://etcher.io
Linux: (dd)
xzcat bbxm-debian-9.0-console-armhf-2017-07-14-2gb.img.xz | sudo dd of=/dev/sdX
All BeagleBone Varients
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
User: debian pass: temppwd
Auto partition resize:
cd /opt/scripts/tools git pull ./grow_partition.sh sudo reboot
Image Updated:
- 2017-07-14
- All BeagleBone Varients: v4.4.68-ti-r111 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2017-07-14/microsd/bone-debian-9.0-console-armhf-2017-07-14-2gb.img.xz
Verify Image with:
sha256sum bone-debian-9.0-console-armhf-2017-07-14-2gb* 5fb430ce843dd5d4acf2aa77b101ffdfde62dc949c93b21a45860a42c2339eae bone-debian-9.0-console-armhf-2017-07-14-2gb.img.xz
Windows/Mac/Linux gui
http://etcher.io
Linux: (dd)
xzcat bone-debian-9.0-console-armhf-2017-07-14-2gb.img.xz | sudo dd of=/dev/sdX
OMAP5432 uEVM
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
User: debian pass: temppwd
Auto partition resize:
cd /opt/scripts/tools git pull ./grow_partition.sh sudo reboot
Image Updated:
- 2017-07-14
- OMAP5432 uEVM: v4.4.68-ti-r111 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2017-07-14/microsd/omap5-uevm-debian-9.0-console-armhf-2017-07-14-2gb.img.xz
Verify Image with:
sha256sum omap5-uevm-debian-9.0-console-armhf-2017-07-14-2gb* d1f59760b40a74a9eb9d0387fa305563d1bee55385d97c0e6a618088a6355040 omap5-uevm-debian-9.0-console-armhf-2017-07-14-2gb.img.xz
Windows/Mac/Linux gui
http://etcher.io
Linux: (dd)
xzcat omap5-uevm-debian-9.0-console-armhf-2017-07-14-2gb.img.xz | sudo dd of=/dev/sdX
BeagleBoard-X15
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
User: debian pass: temppwd
Auto partition resize:
cd /opt/scripts/tools git pull ./grow_partition.sh sudo reboot
Image Updated:
- 2017-07-14
- BeagleBoard-X15: v4.4.68-ti-r111 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2017-07-14/microsd/bbx15-debian-9.0-console-armhf-2017-07-14-2gb.img.xz
Verify Image with:
sha256sum bbx15-debian-9.0-console-armhf-2017-07-14-2gb* 1c126c66aafd3cfd918aa9a1954afc2c69de7871234d0c17ed7e6e949dc85ab7 bbx15-debian-9.0-console-armhf-2017-07-14-2gb.img.xz
Windows/Mac/Linux gui
http://etcher.io
Linux: (dd)
xzcat bbx15-debian-9.0-console-armhf-2017-07-14-2gb.img.xz | sudo dd of=/dev/sdX
Debian Configuration
Install Latest Kernel Image
General apt syntax for searching and installing a specific kernel:
sudo apt-get update sudo apt-cache search linux-image | grep <branch> sudo apt-get install linux-image-<specific version> sudo reboot
Latest kernel script
cd /opt/scripts/tools/ git pull sudo ./update_kernel.sh <OPTIONS>
3.8.x
This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
3.8.x BeagleBone/BeagleBone Black FULL Cape Support --bone-channel --stable
3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai --bone-xenomai-channel --stable
4.4.x-ti
This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.4 Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.4.y
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 --ti-channel --lts-4_4
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT --ti-rt-channel --lts-4_4
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + Xenomai --ti-xenomai-channel --lts-4_4
Mainline (4.4.x lts)
4.4.x BeagleBone/BeagleBone Black + SGX --bone-kernel --lts-4_4
4.4.x BeagleBone/BeagleBone Black + RT + SGX --bone-rt-kernel --lts-4_4
Mainline (4.9.x lts)
4.9.x BeagleBone/BeagleBone Black --bone-kernel --lts-4_9
4.9.x BeagleBone/BeagleBone Black + RT --bone-rt-kernel --lts-4_9
Debian 8: jessie
sudo apt-get install linux-image-armmp
Reboot with your new Kernel Image.
Xorg Drivers
Script:
cd /opt/scripts/tools/ git pull
BeagleBoard/PandaBoard:
cd /opt/scripts/tools/graphics/ ./ti-omapdrm.sh
BeagleBone/BeagleBone Black:
cd /opt/scripts/tools/graphics/ ./ti-tilcdc.sh
SGX Drivers
SGX BeagleBone/BeagleBone Black
Note, these are FBDEV only, no xorg/x11/etc...
Install the "4.4.x" lts/bone kernel: http://elinux.org/BeagleBoardDebian#Mainline_.284.4.x_lts.29
Build SGX userspace for 4.4.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
git clone https://github.com/RobertCNelson/bb-kernel.git cd bb-kernel/ git checkout origin/am33x-v4.4 -b tmp-sgx ./sgx_create_package.sh
Copy ./deploy/GFX_5.01.01.02_es8.x.tar.gz to BeagleBone/BeagleBone Black and install
sudo tar xfv GFX_5.01.01.02_es8.x.tar.gz -C / cd /opt/gfxinstall/ sudo ./sgx-install.sh sudo reboot
Verify omaplfb & pvrsrvkm loaded
debian@arm:~$ lsmod | grep omaplfb omaplfb 12065 0 pvrsrvkm 178782 1 omaplfb
Building Kernel
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
Beagle/Beagle xM
http://eewiki.net/display/linuxonarm/BeagleBoard
BeagleBone
http://eewiki.net/display/linuxonarm/BeagleBone
BeagleBone Black
http://eewiki.net/display/linuxonarm/BeagleBone+Black
Panda/Panda ES
http://eewiki.net/display/linuxonarm/PandaBoard
Upgrading from Debian 5 to Debian 6
Upgrading from Debian 5 to Debian 6 report and tutorial.
Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
sudo apt-get update ; sudo apt-get upgrade sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade