Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
(SGX BeagleBone/BeagleBone Black)
m (2019-04-10)
Line 85: Line 85:
  
 
Image Updated:
 
Image Updated:
 +
*2019-04-10
 +
** BeagleBoard xM: v4.19.31-armv7-x31 kernel
 +
** All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
 +
** OMAP5432 uEVM: v4.14.108-ti-r104 kernel
 +
** BeagleBoard-X15: v4.14.108-ti-r104 kernel
 
*2018-12-10
 
*2018-12-10
 
** BeagleBoard xM: v4.19.8-armv7-x11 kernel
 
** BeagleBoard xM: v4.19.8-armv7-x11 kernel
** All BeagleBone Varients and PocketBeagle: v4.14.79-ti-r84 kernel
+
** All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel
 
** OMAP5432 uEVM: v4.14.79-ti-r84 kernel
 
** OMAP5432 uEVM: v4.14.79-ti-r84 kernel
 
** BeagleBoard-X15: v4.14.79-ti-r84 kernel
 
** BeagleBoard-X15: v4.14.79-ti-r84 kernel
 
*2018-09-11
 
*2018-09-11
 
** BeagleBoard xM: v4.18.7-armv7-x7 kernel
 
** BeagleBoard xM: v4.18.7-armv7-x7 kernel
** All BeagleBone Varients and PocketBeagle: v4.14.67-ti-r74 kernel
+
** All BeagleBone Variants and PocketBeagle: v4.14.67-ti-r74 kernel
 
** OMAP5432 uEVM: v4.14.67-ti-r74 kernel
 
** OMAP5432 uEVM: v4.14.67-ti-r74 kernel
 
** BeagleBoard-X15: v4.14.67-ti-r74 kernel
 
** BeagleBoard-X15: v4.14.67-ti-r74 kernel
*2018-08-10
 
** BeagleBoard xM: v4.17.12-armv7-x12 kernel
 
** All BeagleBone Varients and PocketBeagle: v4.14.62-ti-r69 kernel
 
** OMAP5432 uEVM: v4.14.62-ti-r69 kernel
 
** BeagleBoard-X15: v4.14.62-ti-r69 kernel
 
  
 
Services Active:
 
Services Active:
Line 110: Line 110:
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2018-12-10/elinux/debian-9.6-console-armhf-2018-12-10.tar.xz
+
  wget https://rcn-ee.com/rootfs/2019-04-10/elinux/debian-9.8-console-armhf-2019-04-10.tar.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum debian-9.6-console-armhf-2018-12-10.tar.xz
+
  sha256sum debian-9.8-console-armhf-2019-04-10.tar.xz
  dbf4e19431a64381024ca09651c3a43a377b253a13a429afc2d1fea6e8a7606f debian-9.6-console-armhf-2018-12-10.tar.xz
+
  b1868b55ee7f4a7e4ab192c817dbdf81183d8d39e1423e290efee5a1348ef974 debian-9.8-console-armhf-2019-04-10.tar.xz
  
 
Unpack Image:
 
Unpack Image:
  tar xf debian-9.6-console-armhf-2018-12-10.tar.xz
+
  tar xf debian-9.8-console-armhf-2019-04-10.tar.xz
  cd debian-9.6-console-armhf-2018-12-10
+
  cd debian-9.8-console-armhf-2019-04-10
  
 
If you don't know the location of your SD card:
 
If you don't know the location of your SD card:
Line 151: Line 151:
 
*BeagleBoard Ax/Bx/Cx/Dx          - omap3-beagle
 
*BeagleBoard Ax/Bx/Cx/Dx          - omap3-beagle
 
*BeagleBoard xM                  - omap3-beagle-xm
 
*BeagleBoard xM                  - omap3-beagle-xm
*All BeagleBone Varients         - beaglebone
+
*All BeagleBone Variants         - beaglebone
 
*OMAP5432 uEVM                    - omap5-uevm
 
*OMAP5432 uEVM                    - omap5-uevm
 
*BeagleBoard-X15                  - am57xx-beagle-x15
 
*BeagleBoard-X15                  - am57xx-beagle-x15
Line 162: Line 162:
 
  git clone https://github.com/RobertCNelson/omap-image-builder.git
 
  git clone https://github.com/RobertCNelson/omap-image-builder.git
 
  cd omap-image-builder
 
  cd omap-image-builder
  git checkout v2018.12 -b tmp
+
  git checkout v2019.04 -b tmp
  
 
Stable:
 
Stable:
Line 175: Line 175:
  
 
Image Updated:
 
Image Updated:
 +
*2019-04-10
 +
** BeagleBoard xM: v4.19.31-armv7-x31 kernel
 +
** All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
 +
** OMAP5432 uEVM: v4.14.108-ti-r104 kernel
 +
** BeagleBoard-X15: v4.14.108-ti-r104 kernel
 
*2018-12-10
 
*2018-12-10
 
** BeagleBoard xM: v4.19.8-armv7-x11 kernel
 
** BeagleBoard xM: v4.19.8-armv7-x11 kernel
** All BeagleBone Varients and PocketBeagle: v4.14.79-ti-r84 kernel
+
** All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel
 
** OMAP5432 uEVM: v4.14.79-ti-r84 kernel
 
** OMAP5432 uEVM: v4.14.79-ti-r84 kernel
 
** BeagleBoard-X15: v4.14.79-ti-r84 kernel
 
** BeagleBoard-X15: v4.14.79-ti-r84 kernel
 
*2018-09-11
 
*2018-09-11
 
** BeagleBoard xM: v4.18.7-armv7-x7 kernel
 
** BeagleBoard xM: v4.18.7-armv7-x7 kernel
** All BeagleBone Varients and PocketBeagle: v4.14.67-ti-r74 kernel
+
** All BeagleBone Variants and PocketBeagle: v4.14.67-ti-r74 kernel
 
** OMAP5432 uEVM: v4.14.67-ti-r74 kernel
 
** OMAP5432 uEVM: v4.14.67-ti-r74 kernel
 
** BeagleBoard-X15: v4.14.67-ti-r74 kernel
 
** BeagleBoard-X15: v4.14.67-ti-r74 kernel
*2018-08-10
 
** BeagleBoard xM: v4.17.12-armv7-x12 kernel
 
** All BeagleBone Varients and PocketBeagle: v4.14.62-ti-r69 kernel
 
** OMAP5432 uEVM: v4.14.62-ti-r69 kernel
 
** BeagleBoard-X15: v4.14.62-ti-r69 kernel
 
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2018-12-10/elinux/debian-buster-console-armhf-2018-12-10.tar.xz
+
  wget https://rcn-ee.com/rootfs/2019-04-10/elinux/debian-buster-console-armhf-2019-04-10.tar.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum debian-buster-console-armhf-2018-12-10.tar.xz
+
  sha256sum debian-buster-console-armhf-2019-04-10.tar.xz
  fb5e6893761544b32bbf4d2943d0760d3cbbc36aabc35b87080f8544db8e8565 debian-buster-console-armhf-2018-12-10.tar.xz
+
  79f5cfce81726a248e7cabeb70e24db5124de59b2a2ab2f1239d2204fc9aefee debian-buster-console-armhf-2019-04-10.tar.xz
  
 
Unpack image:
 
Unpack image:
  tar xf debian-buster-console-armhf-2018-12-10.tar.xz
+
  tar xf debian-buster-console-armhf-2019-04-10.tar.xz
  cd debian-buster-console-armhf-2018-12-10
+
  cd debian-buster-console-armhf-2019-04-10
  
 
Then follow the directions shown above with the other images...
 
Then follow the directions shown above with the other images...
Line 223: Line 223:
  
 
Image Updated:
 
Image Updated:
 +
*2019-04-10
 +
** All BeagleBone Variants with eMMC: v4.14.108-ti-r104 kernel
 
*2018-12-10
 
*2018-12-10
 
** All BeagleBone Variants with eMMC: v4.14.79-ti-r84 kernel
 
** All BeagleBone Variants with eMMC: v4.14.79-ti-r84 kernel
 
*2018-09-11
 
*2018-09-11
 
** All BeagleBone Variants with eMMC: v4.14.67-ti-r74 kernel
 
** All BeagleBone Variants with eMMC: v4.14.67-ti-r74 kernel
*2018-08-10
 
** All BeagleBone Variants with eMMC: v4.14.62-ti-r69 kernel
 
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2018-12-10/flasher/BBB-eMMC-flasher-debian-9.6-console-armhf-2018-12-10-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2019-04-10/flasher/BBB-eMMC-flasher-debian-9.8-console-armhf-2019-04-10-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum BBB-eMMC-flasher-debian-9.6-console-armhf-2018-12-10-2gb*
+
  sha256sum BBB-eMMC-flasher-debian-9.8-console-armhf-2019-04-10-2gb*
  22351bc54ae80ac963d9c8d24c535575f8688880427a8cb3f389828379c999c9 BBB-eMMC-flasher-debian-9.6-console-armhf-2018-12-10-2gb.img.xz
+
  b6d6fc917d9a2fd46dd45e527c5e00c519dabcf5f7ac582f87f5c8f2ab3803d2 BBB-eMMC-flasher-debian-9.8-console-armhf-2019-04-10-2gb.img.xz
  
 
Windows/Mac/Linux gui
 
Windows/Mac/Linux gui
Line 241: Line 241:
  
 
Linux: (dd)
 
Linux: (dd)
  xzcat BBB-eMMC-flasher-debian-9.6-console-armhf-2018-12-10-2gb.img.xz | sudo dd of=/dev/sdX
+
  xzcat BBB-eMMC-flasher-debian-9.8-console-armhf-2019-04-10-2gb.img.xz | sudo dd of=/dev/sdX
  
 
== eMMC: BeagleBoard-X15 ==
 
== eMMC: BeagleBoard-X15 ==
  
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io  First press and hold the boot select button (next to the microSD card), then apply power. On boot-up the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the Ethernet jack. Progress is reported on both the serial debug and HDMI connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
  
 
Script for reference: (this is the script that writes to the eMMC)
 
Script for reference: (this is the script that writes to the eMMC)
Line 260: Line 260:
  
 
Image Updated:
 
Image Updated:
 +
*2019-04-10
 +
** BeagleBoard-X15: v4.14.108-ti-r104 kernel
 
*2018-12-10
 
*2018-12-10
 
** BeagleBoard-X15: v4.14.79-ti-r84 kernel
 
** BeagleBoard-X15: v4.14.79-ti-r84 kernel
 
*2018-09-11
 
*2018-09-11
 
** BeagleBoard-X15: v4.14.67-ti-r74 kernel
 
** BeagleBoard-X15: v4.14.67-ti-r74 kernel
*2018-08-10
 
** BeagleBoard-X15: v4.14.62-ti-r69 kernel
 
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2018-12-10/flasher/bbx15-eMMC-flasher-debian-9.6-console-armhf-2018-12-10-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2019-04-10/flasher/am57xx-eMMC-flasher-debian-9.8-console-armhf-2019-04-10-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum bbx15-eMMC-flasher-debian-9.6-console-armhf-2018-12-10-2gb*
+
  sha256sum am57xx-eMMC-flasher-debian-9.8-console-armhf-2019-04-10-2gb*
  3fa7b989336531a27a00b9b98ce3f15f4f129b39edfd66f98883e6f1cbfad30a bbx15-eMMC-flasher-debian-9.6-console-armhf-2018-12-10-2gb.img.xz
+
  94bb277258d545a1fa263a46dbc6cdfd7e68e32baef5a4ddc04b17e90bce792f am57xx-eMMC-flasher-debian-9.8-console-armhf-2019-04-10-2gb.img.xz
  
 
Windows/Mac/Linux gui
 
Windows/Mac/Linux gui
Line 278: Line 278:
  
 
Linux: (dd)
 
Linux: (dd)
  xzcat bbx15-eMMC-flasher-debian-9.6-console-armhf-2018-12-10-2gb.img.xz | sudo dd of=/dev/sdX
+
  xzcat am57xx-eMMC-flasher-debian-9.8-console-armhf-2019-04-10-2gb.img.xz | sudo dd of=/dev/sdX
  
 
= raw microSD img =
 
= raw microSD img =
Line 284: Line 284:
 
== BeagleBoard xM ==
 
== BeagleBoard xM ==
  
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io
  
 
User: debian
 
User: debian
Line 296: Line 296:
  
 
Image Updated:
 
Image Updated:
 +
*2019-04-10
 +
** BeagleBoard xM: v4.19.31-armv7-x31 kernel
 
*2018-12-10
 
*2018-12-10
 
** BeagleBoard xM: v4.19.8-armv7-x11 kernel
 
** BeagleBoard xM: v4.19.8-armv7-x11 kernel
 
*2018-09-11
 
*2018-09-11
 
** BeagleBoard xM: v4.18.7-armv7-x7 kernel
 
** BeagleBoard xM: v4.18.7-armv7-x7 kernel
*2018-08-10
 
** BeagleBoard xM: v4.17.12-armv7-x12 kernel
 
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2018-12-10/microsd/bbxm-debian-9.6-console-armhf-2018-12-10-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2019-04-10/microsd/bbxm-debian-9.8-console-armhf-2019-04-10-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum bbxm-debian-9.6-console-armhf-2018-12-10-2gb*
+
  sha256sum bbxm-debian-9.8-console-armhf-2019-04-10-2gb*
  8fb1a20ff6116e41384d9728940055ca69da3e19245ac1eee97040a831ee206d bbxm-debian-9.6-console-armhf-2018-12-10-2gb.img.xz
+
  07e1d86639009b60e17f4bb67280e244d93df68aebe44594103be1438cb6fa5d bbxm-debian-9.8-console-armhf-2019-04-10-2gb.img.xz
  
 
Windows/Mac/Linux gui
 
Windows/Mac/Linux gui
Line 314: Line 314:
  
 
Linux: (dd)
 
Linux: (dd)
  xzcat bbxm-debian-9.6-console-armhf-2018-12-10-2gb.img.xz | sudo dd of=/dev/sdX
+
  xzcat bbxm-debian-9.8-console-armhf-2019-04-10-2gb.img.xz | sudo dd of=/dev/sdX
  
== All BeagleBone Varients and PocketBeagle==
+
== All BeagleBone Variants and PocketBeagle==
  
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io
  
 
User: debian
 
User: debian
Line 330: Line 330:
  
 
Image Updated:
 
Image Updated:
 +
*2019-04-10
 +
** All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
 
*2018-12-10
 
*2018-12-10
** All BeagleBone Varients and PocketBeagle: v4.14.79-ti-r84 kernel
+
** All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel
 
*2018-09-11
 
*2018-09-11
** All BeagleBone Varients and PocketBeagle: v4.14.67-ti-r74 kernel
+
** All BeagleBone Variants and PocketBeagle: v4.14.67-ti-r74 kernel
*2018-08-10
 
** All BeagleBone Varients and PocketBeagle: v4.14.62-ti-r69 kernel
 
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2018-12-10/microsd/bone-debian-9.6-console-armhf-2018-12-10-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2019-04-10/microsd/bone-debian-9.8-console-armhf-2019-04-10-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum bone-debian-9.6-console-armhf-2018-12-10-2gb*
+
  sha256sum bone-debian-9.8-console-armhf-2019-04-10-2gb*
  4a2e413a0b7a4496fb2d1a78c0cc05a521bd535642d38561a2e875da27f5a4a8 bone-debian-9.6-console-armhf-2018-12-10-2gb.img.xz
+
  adb05e6b7448e869b8f296c79b5b0825bbf623c54e90d6c4efd9bfbbc48c5a0b bone-debian-9.8-console-armhf-2019-04-10-2gb.img.xz
  
 
Windows/Mac/Linux gui
 
Windows/Mac/Linux gui
Line 348: Line 348:
  
 
Linux: (dd)
 
Linux: (dd)
  xzcat bone-debian-9.6-console-armhf-2018-12-10-2gb.img.xz | sudo dd of=/dev/sdX
+
  xzcat bone-debian-9.8-console-armhf-2019-04-10-2gb.img.xz | sudo dd of=/dev/sdX
  
 
== OMAP5432 uEVM ==
 
== OMAP5432 uEVM ==
  
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io
  
 
User: debian
 
User: debian
Line 364: Line 364:
  
 
Image Updated:
 
Image Updated:
 +
*2019-04-10
 +
** OMAP5432 uEVM: v4.14.108-ti-r104 kernel
 
*2018-12-10
 
*2018-12-10
 
** OMAP5432 uEVM: v4.14.79-ti-r84 kernel
 
** OMAP5432 uEVM: v4.14.79-ti-r84 kernel
 
*2018-09-11
 
*2018-09-11
 
** OMAP5432 uEVM: v4.14.67-ti-r74 kernel
 
** OMAP5432 uEVM: v4.14.67-ti-r74 kernel
*2018-08-10
 
** OMAP5432 uEVM: v4.14.62-ti-r69 kernel
 
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2018-12-10/microsd/omap5-uevm-debian-9.6-console-armhf-2018-12-10-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2019-04-10/microsd/omap5-uevm-debian-9.8-console-armhf-2019-04-10-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum omap5-uevm-debian-9.6-console-armhf-2018-12-10-2gb*
+
  sha256sum omap5-uevm-debian-9.8-console-armhf-2019-04-10-2gb*
  941ed74214fd343567be2151eceefc60b2551af63bf82eb4accc5859f87e9d9a omap5-uevm-debian-9.6-console-armhf-2018-12-10-2gb.img.xz
+
  a7f6f53222d2143c3289c590ef0dc5dadff83a026d5f5be80e71fd77d191af21 omap5-uevm-debian-9.8-console-armhf-2019-04-10-2gb.img.xz
  
 
Windows/Mac/Linux gui
 
Windows/Mac/Linux gui
Line 382: Line 382:
  
 
Linux: (dd)
 
Linux: (dd)
  xzcat omap5-uevm-debian-9.6-console-armhf-2018-12-10-2gb.img.xz | sudo dd of=/dev/sdX
+
  xzcat omap5-uevm-debian-9.8-console-armhf-2019-04-10-2gb.img.xz | sudo dd of=/dev/sdX
  
 
== BeagleBoard-X15 ==
 
== BeagleBoard-X15 ==
  
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io
  
 
User: debian
 
User: debian
Line 398: Line 398:
  
 
Image Updated:
 
Image Updated:
 +
*2019-04-10
 +
** BeagleBoard-X15: v4.14.108-ti-r104 kernel
 
*2018-12-10
 
*2018-12-10
 
** BeagleBoard-X15: v4.14.79-ti-r84 kernel
 
** BeagleBoard-X15: v4.14.79-ti-r84 kernel
 
*2018-09-11
 
*2018-09-11
 
** BeagleBoard-X15: v4.14.67-ti-r74 kernel
 
** BeagleBoard-X15: v4.14.67-ti-r74 kernel
*2018-08-10
 
** BeagleBoard-X15: v4.14.62-ti-r69 kernel
 
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2018-12-10/microsd/bbx15-debian-9.6-console-armhf-2018-12-10-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2019-04-10/microsd/am57xx-debian-9.8-console-armhf-2019-04-10-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum bbx15-debian-9.6-console-armhf-2018-12-10-2gb*
+
  sha256sum am57xx-debian-9.8-console-armhf-2019-04-10-2gb*
  4cc8681fe2fe839d6be007df72cf8d188338d738964da9530764b0514b0e3fb6 bbx15-debian-9.6-console-armhf-2018-12-10-2gb.img.xz
+
  115cb74b671f16c4db00b3a26d596a85cbd7e684f2cee8faad5c81c1b7afbc0f am57xx-debian-9.8-console-armhf-2019-04-10-2gb.img.xz
  
 
Windows/Mac/Linux gui
 
Windows/Mac/Linux gui
Line 416: Line 416:
  
 
Linux: (dd)
 
Linux: (dd)
  xzcat bbx15-debian-9.6-console-armhf-2018-12-10-2gb.img.xz | sudo dd of=/dev/sdX
+
  xzcat am57xx-debian-9.8-console-armhf-2019-04-10-2gb.img.xz | sudo dd of=/dev/sdX
  
 
= Debian Configuration =
 
= Debian Configuration =

Revision as of 06:37, 11 April 2019

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard-xM --dtb omap3-beagle-xm
BeagleBoard-X15 --dtb am57xx-beagle-x15
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB

Debian 9 (stretch)

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro stretch

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro stretch
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v4.19.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.14.y -b tmp
./build_kernel.sh

Debian (stretch)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2019-04-10
    • BeagleBoard xM: v4.19.31-armv7-x31 kernel
    • All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
    • OMAP5432 uEVM: v4.14.108-ti-r104 kernel
    • BeagleBoard-X15: v4.14.108-ti-r104 kernel
  • 2018-12-10
    • BeagleBoard xM: v4.19.8-armv7-x11 kernel
    • All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel
    • OMAP5432 uEVM: v4.14.79-ti-r84 kernel
    • BeagleBoard-X15: v4.14.79-ti-r84 kernel
  • 2018-09-11
    • BeagleBoard xM: v4.18.7-armv7-x7 kernel
    • All BeagleBone Variants and PocketBeagle: v4.14.67-ti-r74 kernel
    • OMAP5432 uEVM: v4.14.67-ti-r74 kernel
    • BeagleBoard-X15: v4.14.67-ti-r74 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) (Windows/Linux) http://192.168.7.2, (Mac/Linux) http://192.168.6.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) (Windows/Linux) debian@192.168.7.2, (Mac/Linux) debian@192.168.6.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2019-04-10/elinux/debian-9.8-console-armhf-2019-04-10.tar.xz

Verify Image with:

sha256sum debian-9.8-console-armhf-2019-04-10.tar.xz
b1868b55ee7f4a7e4ab192c817dbdf81183d8d39e1423e290efee5a1348ef974  debian-9.8-console-armhf-2019-04-10.tar.xz

Unpack Image:

tar xf debian-9.8-console-armhf-2019-04-10.tar.xz
cd debian-9.8-console-armhf-2019-04-10

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • All BeagleBone Variants - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2019.04 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_buster_armhf

Debian Testing (buster)

Image Updated:

  • 2019-04-10
    • BeagleBoard xM: v4.19.31-armv7-x31 kernel
    • All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
    • OMAP5432 uEVM: v4.14.108-ti-r104 kernel
    • BeagleBoard-X15: v4.14.108-ti-r104 kernel
  • 2018-12-10
    • BeagleBoard xM: v4.19.8-armv7-x11 kernel
    • All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel
    • OMAP5432 uEVM: v4.14.79-ti-r84 kernel
    • BeagleBoard-X15: v4.14.79-ti-r84 kernel
  • 2018-09-11
    • BeagleBoard xM: v4.18.7-armv7-x7 kernel
    • All BeagleBone Variants and PocketBeagle: v4.14.67-ti-r74 kernel
    • OMAP5432 uEVM: v4.14.67-ti-r74 kernel
    • BeagleBoard-X15: v4.14.67-ti-r74 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2019-04-10/elinux/debian-buster-console-armhf-2019-04-10.tar.xz

Verify Image with:

sha256sum debian-buster-console-armhf-2019-04-10.tar.xz
79f5cfce81726a248e7cabeb70e24db5124de59b2a2ab2f1239d2204fc9aefee  debian-buster-console-armhf-2019-04-10.tar.xz

Unpack image:

tar xf debian-buster-console-armhf-2019-04-10.tar.xz
cd debian-buster-console-armhf-2019-04-10

Then follow the directions shown above with the other images...

Flasher

eMMC: All BeagleBone Variants with eMMC

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On boot-up the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the Ethernet jack. Progress is reported on both the serial debug and HDMI connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2019-04-10
    • All BeagleBone Variants with eMMC: v4.14.108-ti-r104 kernel
  • 2018-12-10
    • All BeagleBone Variants with eMMC: v4.14.79-ti-r84 kernel
  • 2018-09-11
    • All BeagleBone Variants with eMMC: v4.14.67-ti-r74 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2019-04-10/flasher/BBB-eMMC-flasher-debian-9.8-console-armhf-2019-04-10-2gb.img.xz

Verify Image with:

sha256sum BBB-eMMC-flasher-debian-9.8-console-armhf-2019-04-10-2gb*
b6d6fc917d9a2fd46dd45e527c5e00c519dabcf5f7ac582f87f5c8f2ab3803d2  BBB-eMMC-flasher-debian-9.8-console-armhf-2019-04-10-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat BBB-eMMC-flasher-debian-9.8-console-armhf-2019-04-10-2gb.img.xz | sudo dd of=/dev/sdX

eMMC: BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On boot-up the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the Ethernet jack. Progress is reported on both the serial debug and HDMI connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2019-04-10
    • BeagleBoard-X15: v4.14.108-ti-r104 kernel
  • 2018-12-10
    • BeagleBoard-X15: v4.14.79-ti-r84 kernel
  • 2018-09-11
    • BeagleBoard-X15: v4.14.67-ti-r74 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2019-04-10/flasher/am57xx-eMMC-flasher-debian-9.8-console-armhf-2019-04-10-2gb.img.xz

Verify Image with:

sha256sum am57xx-eMMC-flasher-debian-9.8-console-armhf-2019-04-10-2gb*
94bb277258d545a1fa263a46dbc6cdfd7e68e32baef5a4ddc04b17e90bce792f  am57xx-eMMC-flasher-debian-9.8-console-armhf-2019-04-10-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat am57xx-eMMC-flasher-debian-9.8-console-armhf-2019-04-10-2gb.img.xz | sudo dd of=/dev/sdX

raw microSD img

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2019-04-10
    • BeagleBoard xM: v4.19.31-armv7-x31 kernel
  • 2018-12-10
    • BeagleBoard xM: v4.19.8-armv7-x11 kernel
  • 2018-09-11
    • BeagleBoard xM: v4.18.7-armv7-x7 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2019-04-10/microsd/bbxm-debian-9.8-console-armhf-2019-04-10-2gb.img.xz

Verify Image with:

sha256sum bbxm-debian-9.8-console-armhf-2019-04-10-2gb*
07e1d86639009b60e17f4bb67280e244d93df68aebe44594103be1438cb6fa5d  bbxm-debian-9.8-console-armhf-2019-04-10-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbxm-debian-9.8-console-armhf-2019-04-10-2gb.img.xz | sudo dd of=/dev/sdX

All BeagleBone Variants and PocketBeagle

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2019-04-10
    • All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
  • 2018-12-10
    • All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel
  • 2018-09-11
    • All BeagleBone Variants and PocketBeagle: v4.14.67-ti-r74 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2019-04-10/microsd/bone-debian-9.8-console-armhf-2019-04-10-2gb.img.xz

Verify Image with:

sha256sum bone-debian-9.8-console-armhf-2019-04-10-2gb*
adb05e6b7448e869b8f296c79b5b0825bbf623c54e90d6c4efd9bfbbc48c5a0b  bone-debian-9.8-console-armhf-2019-04-10-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bone-debian-9.8-console-armhf-2019-04-10-2gb.img.xz | sudo dd of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2019-04-10
    • OMAP5432 uEVM: v4.14.108-ti-r104 kernel
  • 2018-12-10
    • OMAP5432 uEVM: v4.14.79-ti-r84 kernel
  • 2018-09-11
    • OMAP5432 uEVM: v4.14.67-ti-r74 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2019-04-10/microsd/omap5-uevm-debian-9.8-console-armhf-2019-04-10-2gb.img.xz

Verify Image with:

sha256sum omap5-uevm-debian-9.8-console-armhf-2019-04-10-2gb*
a7f6f53222d2143c3289c590ef0dc5dadff83a026d5f5be80e71fd77d191af21  omap5-uevm-debian-9.8-console-armhf-2019-04-10-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat omap5-uevm-debian-9.8-console-armhf-2019-04-10-2gb.img.xz | sudo dd of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2019-04-10
    • BeagleBoard-X15: v4.14.108-ti-r104 kernel
  • 2018-12-10
    • BeagleBoard-X15: v4.14.79-ti-r84 kernel
  • 2018-09-11
    • BeagleBoard-X15: v4.14.67-ti-r74 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2019-04-10/microsd/am57xx-debian-9.8-console-armhf-2019-04-10-2gb.img.xz

Verify Image with:

sha256sum am57xx-debian-9.8-console-armhf-2019-04-10-2gb*
115cb74b671f16c4db00b3a26d596a85cbd7e684f2cee8faad5c81c1b7afbc0f  am57xx-debian-9.8-console-armhf-2019-04-10-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat am57xx-debian-9.8-console-armhf-2019-04-10-2gb.img.xz | sudo dd of=/dev/sdX

Debian Configuration

Install Latest Kernel Image

General apt syntax for searching and installing a specific kernel:

sudo apt-get update
sudo apt-cache search linux-image | grep <branch>
sudo apt-get install linux-image-<specific version>
sudo reboot

Latest kernel script

cd /opt/scripts/tools/
git pull
sudo ./update_kernel.sh <OPTIONS>

3.8.x

This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
3.8.x BeagleBone/BeagleBone Black FULL Cape Support
--bone-channel --stable
3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
--bone-xenomai-channel --stable

4.14.x-ti

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.14
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.14.y
4.14.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
--ti-channel --lts-4_14
4.14.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
--ti-rt-channel --lts-4_14

Mainline (4.14.x lts)

4.14.x BeagleBone/BeagleBone Black
--bone-kernel --lts-4_14
4.14.x BeagleBone/BeagleBone Black + RT
--bone-rt-kernel --lts-4_14

Debian 9: stretch

sudo apt-get install linux-image-armmp

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

A page is dedicated for the installation and use of the graphics accelerator.

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade