Difference between revisions of "BeagleBoardUbuntu"

From eLinux.org
Jump to: navigation, search
m (PC: Built Root file system)
(Method 3: Manual Install (no automatic scripts))
 
(922 intermediate revisions by 40 users not shown)
Line 1: Line 1:
 
[[Category: Linux]]
 
[[Category: Linux]]
 
[[Category: OMAP]]
 
[[Category: OMAP]]
Ubuntu 9.04 Alpha seems to be working quite well so here's a quick doc.  Eventually this will probably be moved to ubuntu's wiki...
+
[[Category:Development Boards]]
 +
[[Category: BeagleBoard]]
 +
''(For BeagleBoardAngstrom, click [[BeagleBoardAngstrom|here]].)''
 +
''(Should [[Beagleboard:Ubuntu On BeagleBone Black]] be merged into this page?)''
  
This page is about running a (ARM EABI) [http://www.ubuntu.com/ Ubuntu] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Ubuntu distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]].
+
This page is about running a Linux distribution (ARM [https://wiki.debian.org/ArmEabiPort EABI]) [http://www.ubuntu.com/ Ubuntu] on the [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Ubuntu distribution from the [[BeagleBoard#MMC.2FSD_boot|SD card]]. Since much of this page is generic, it has also been extended to help support devices such as the [[PandaBoard]] and [[BeagleBone]].
  
= Recommended Beagle Software =
+
* For the best experience, make sure you have an LCD/HDMI monitor attached to the BeagleBoard's HDMI port, 2 GB/4 GB/8 GB SD card, and a known good USB 2.0 hub with mouse and keyboard.
  
xloader xxxx  Upgrade
+
= Help =
  
U-Boot 2009.01 Upgrade: http://elinux.org/BeagleBoardUbuntu#Upgrade_U-Boot
+
If you need any help:
  
= Ubuntu Rootfs Install =
+
*Kernel related help:
Use Oliver's <ogra> script located here: https://wiki.ubuntu.com/ARM/RootfsFromScratch
+
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 +
** ''#beagle'': Beagle IRC on Freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 +
** Kernel Trees
 +
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v4.17.x kernel branch]
 +
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
  
==PC: Build Root File System==
+
*Ubuntu related help:
Requirements:
+
** ''#ubuntu-arm'': Ubuntu's ARM IRC on Freenode ([http://irclogs.ubuntu.com/ logs] -> year -> month -> day -> #ubuntu-arm.html)
sudo apt-get install qemu
 
  
wget http://ports.ubuntu.com/pool/main/d/debootstrap/debootstrap_1.0.10ubuntu3_all.deb
+
*When requesting help, please provide some debugging information:
sudo dpkg -i debootstrap_1.0.10ubuntu3_all.deb
+
** U-Boot Version installed on board
wget http://people.ubuntu.com/~ogra/arm/build-arm-rootfs
+
** Kernel Version: uname -a
sudo chmod u+x build-arm-rootfs
+
** pastebin dmesg
 +
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
  
General
+
= Required Beagle Software =
sudo ./build-arm-rootfs --fqdn <hostname> --login <rootuser> --password <rootuserpasswd> --imagesize <qemu image size> --seed <packages>
 
  
lxde Destktop
+
Mainline U-Boot:
sudo ./build-arm-rootfs --fqdn beagleboard --login ubuntu --password temppwd --imagesize 2G --seed lxde,gdm
+
* All older BeagleBoard (classic) Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions
 +
* XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
 +
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
  
Xubuntu Desktop
+
= Omap Serial Changes =
sudo ./build-arm-rootfs --fqdn beagleboard --login ubuntu --password temppwd --imagesize 2G --seed xubuntu-desktop
 
  
Ubuntu Desktop
+
boot.scr/boot.cmd changes:
sudo ./build-arm-rootfs --fqdn beagleboard --login ubuntu --password temppwd --imagesize 3G --seed ubuntu-desktop
 
  
==PC: Format SD Card==
+
With 2.6.35:
 +
console=ttyS2,115200n8
  
You will need a 1GB SD card or greater.
+
With 2.6.36/37+:
Standard System : ~xxxMB
+
  console=ttyO2,115200n8
  + Desktop environment (GNOME) : ~x.xGB
 
  
Starting with an empty SD card and using gparted, create:
+
Serial console login: /etc/init/ttyO2.conf
  50 MiB Primary Partition, fat32
+
start on stopped rc RUNLEVEL=[2345]
  Rest as ext2/ext3
+
stop on runlevel [!2345]
 +
 +
respawn
 +
exec /sbin/getty 115200 ttyO2
 +
 
 +
= Method 1: Download a Complete Pre-Configured Image =
 +
 
 +
== Demo Image ==
 +
 
 +
* '''Advanced Users only''': BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
 +
git clone https://github.com/RobertCNelson/armv7-multiplatform.git
 +
cd armv7-multiplatform
 +
git checkout origin/v5.4.x -b tmp
 +
./build_kernel.sh
 +
* '''Advanced Users only''': BeagleBone/BeagleBone Black/PocketBeagle:  Kernel v4.19.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.19.y
 +
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev
 +
git checkout origin/ti-linux-4.19.y -b tmp
 +
./build_kernel.sh
 +
 
 +
=== Ubuntu (18.04.4) ===
 +
 
 +
Default username/password:
 +
*username: ubuntu
 +
*password: temppwd
 +
 
 +
Image Updated:
 +
*2020-03-12
 +
** BeagleBoard xM: v5.4.24-armv7-x20 kernel
 +
** All BeagleBone Variants and PocketBeagle: v4.19.94-ti-r36 kernel
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
 +
*2019-04-10
 +
** BeagleBoard xM: v4.19.31-armv7-x31 kernel
 +
** All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
 +
** BeagleBoard-X15: v4.14.108-ti-r104 kernel
 +
*2018-12-10
 +
** BeagleBoard xM: v4.19.8-armv7-x11 kernel
 +
** All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel
 +
** BeagleBoard-X15: v4.14.79-ti-r84 kernel
 +
 
 +
Services Active:
 +
Note: Depending on your internal network these may work out of the box
 +
Apache, Port 80: http://arm.local/ (Bone: via usb) (Windows/Linux) http://192.168.7.2, (Mac/Linux) http://192.168.6.2
 +
  SSH, Port 22: ssh ubuntu@arm.local (Bone: via usb) (Windows/Linux) ubuntu@192.168.7.2, (Mac/Linux) ubuntu@192.168.6.2
 +
  Getty, Serial Port
 +
 
 +
Default user: ubuntu pass: temppwd
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2020-03-12/elinux/ubuntu-18.04.4-console-armhf-2020-03-12.tar.xz
  
Gparted Example: http://nishanthmenon.blogspot.com/2008/08/how-to-boot-beagle.html
+
Verify Image with:
 +
sha256sum ubuntu-18.04.4-console-armhf-2020-03-12.tar.xz
 +
abe086f9132dfe8e8b9df8d14da225e0ce89a082abc92515de8a2ac63fc54ae2  ubuntu-18.04.4-console-armhf-2020-03-12.tar.xz
  
==PC: Setup SD uboot/uImage Partition==
+
Unpack Image:
 +
tar xf ubuntu-18.04.4-console-armhf-2020-03-12.tar.xz
 +
cd ubuntu-18.04.4-console-armhf-2020-03-12
  
Mount your SD card fat32 partition. (/media/disk/)
+
If you don't know the location of your SD card:
 +
sudo ./setup_sdcard.sh --probe-mmc
  
Note: Depending on how your system mounts the cards, you may have to run as sudo.
+
You should see something like:
  
  cd /media/disk/
+
  Are you sure? I don't see [/dev/idontknow], here is what I do see...
wget http://www.rcn-ee.com/deb/kernel/CC-v2.6.28-9a6536c-oer8
 
mv CC-v2.6.28-9a6536c-oer8 uImage
 
 
   
 
   
  ext3
+
  fdisk -l:
  wget http://www.rcn-ee.com/deb/kernel/ubuntu-ext3.scr
+
  Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
mv ubuntu-ext3.scr boot.scr
+
Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
 
   
 
   
  ext2
+
  lsblk:
  wget http://www.rcn-ee.com/deb/kernel/ubuntu-ext2.scr
+
NAME  MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
  mv ubuntu-ext2.scr boot.scr
+
sda      8:0    0 465.8G  0 disk
 +
├─sda1  8:1    0 446.9G  0 part /  '''<- x86 Root Partition'''
 +
├─sda2  8:2    0    1K  0 part
 +
└─sda5  8:5    0  18.9G  0 part [SWAP]
 +
  sdd      8:48  1  3.7G  0 disk
 +
├─sdd1  8:49  1    64M  0 part
 +
└─sdd2  8:50  1  3.6G  0 part
 +
 
 +
* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
 +
 
 +
Install Image:
 +
 
 +
Quick install script for [board]
 +
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
 +
 
 +
board options:
 +
*BeagleBoard Ax/Bx/Cx/Dx          - omap3-beagle
 +
*BeagleBoard xM                  - omap3-beagle-xm
 +
*All BeagleBone Variants          - beaglebone
 +
*OMAP5432 uEVM                    - omap5-uevm
 +
*BeagleBoard-X15 (BeagleBone AI) - am57xx-beagle-x15
  
Need a different resolution or other setting in the *.scr's? See : http://elinux.org/BeagleBoardUbuntu#U-Boot_Script_Files
+
So for the BeagleBoard xM:
 +
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
  
Note: CC-v2.6.28-9a6536c-oer8 uImage was built with most/all available usb wifi/ethernet adapter built in to get the beagleboard to connect to the internet.  For most people this is all you'll need, however it is recommended to install one of the kernel image deb packages. (script is provided.)
+
Advanced: Build Image:
  
==PC: Setup SD ext2/ext3 Partition==
+
git clone https://github.com/RobertCNelson/omap-image-builder.git
 +
cd omap-image-builder
 +
git checkout v2020.03 -b tmp
  
Mount your SD ext2/ext3 partition. (/media/disk/)
+
Stable:
  
  sudo tar xfp armel-rootfs-[date].tgz -C /media/disk
+
  ./RootStock-NG.sh -c rcn-ee_console_ubuntu_bionic_armhf
  
==PC or Beagleboard: System Setup on the (ext2/ext3) Partition==
+
== Flasher ==
  
===Enable Network Access===
+
=== eMMC: All BeagleBone Variants with eMMC ===
  
Modify /etc/network/interfaces
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On boot-up the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the Ethernet jack. Progress is reported on both the serial debug and HDMI connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Ubuntu will now boot directly from eMMC.
  auto eth0
 
  iface eth0 inet dhcp
 
  
Manual: From the Command line
+
Script for reference: (this is the script that writes to the eMMC)
  sudo ifconfig eth0 up
+
  https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
sudo dhclient eth0
 
  
===Login thru Serial Port===
+
This script will only take about 5-6 Minutes after power on.
  
Create file /etc/event.d/ttyS2
+
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
  # ttyS2 - getty
+
User: ubuntu
  #
+
pass: temppwd
  # This service maintains a getty on tty6 from the point the system is
+
 
  # started until it is shut down again.
+
Image Updated:
   
+
*2020-03-12
  start on runlevel 2
+
** All BeagleBone Variants with eMMC: v4.19.94-ti-r36 kernel
  start on runlevel 3
+
*2019-04-10
   
+
** All BeagleBone Variants with eMMC: v4.14.108-ti-r104 kernel
  stop on runlevel 0
+
*2018-12-10
  stop on runlevel 1
+
** All BeagleBone Variants with eMMC: v4.14.79-ti-r84 kernel
  stop on runlevel 4
+
 
  stop on runlevel 5
+
Get prebuilt image:
  stop on runlevel 6
+
wget https://rcn-ee.com/rootfs/2020-03-12/flasher/bone-eMMC-flasher-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz
   
+
 
  respawn
+
Verify Image with:
  exec /sbin/getty -L 115200 ttyS2
+
sha256sum bone-eMMC-flasher-ubuntu-18.04.4-console-armhf-2020-03-12-2gb*
 +
2bc7f92df84dbd89c1cdd790ec794926a5d6b0f0b891143085d77141170518e2 bone-eMMC-flasher-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz
 +
 
 +
Windows/Mac/Linux gui
 +
  http://etcher.io
 +
 
 +
Linux: (dd)
 +
  xzcat bone-eMMC-flasher-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
 +
 
 +
=== eMMC: BeagleBoard-X15 and BeagleBone AI ===
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io  First press and hold the boot select button (next to the microSD card), then apply power. On boot-up the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the Ethernet jack. Progress is reported on both the serial debug and HDMI connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Ubuntu will now boot directly from eMMC.
 +
 
 +
Script for reference: (this is the script that writes to the eMMC)
 +
  https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
 +
 
 +
This script will only take about 5-6 Minutes after power on.
 +
 
 +
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
 +
 
 +
User: ubuntu
 +
pass: temppwd
 +
 
 +
Image Updated:
 +
*2020-03-12
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
 +
*2019-04-10
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.14.108-ti-r104 kernel
 +
*2018-12-10
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.14.79-ti-r84 kernel
 +
 
 +
Get prebuilt image:
 +
  wget https://rcn-ee.com/rootfs/2020-03-12/flasher/am57xx-eMMC-flasher-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz
 +
 
 +
Verify Image with:
 +
  sha256sum am57xx-eMMC-flasher-ubuntu-18.04.4-console-armhf-2020-03-12-2gb*
 +
0c359f2b5e9d27d167f55877d3abfea0af2fe721463136f354dfd5d72be8a541  am57xx-eMMC-flasher-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz
 +
 
 +
Windows/Mac/Linux gui
 +
http://etcher.io
 +
 
 +
Linux: (dd)
 +
xzcat am57xx-eMMC-flasher-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
 +
 
 +
== raw microSD img ==
 +
 
 +
=== BeagleBoard xM ===
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io
 +
 
 +
User: ubuntu
 +
pass: temppwd
 +
 
 +
Auto partition resize:
 +
cd /opt/scripts/tools
 +
  git pull
 +
  ./grow_partition.sh
 +
  sudo reboot
 +
 
 +
Image Updated:
 +
*2020-03-12
 +
** BeagleBoard xM: v5.4.24-armv7-x20 kernel
 +
*2019-04-10
 +
** BeagleBoard xM: v4.19.31-armv7-x31 kernel
 +
*2018-12-10
 +
** BeagleBoard xM: v4.19.8-armv7-x11 kernel
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2020-03-12/microsd/bbxm-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz
 +
 
 +
Verify Image with:
 +
  sha256sum bbxm-ubuntu-18.04.4-console-armhf-2020-03-12-2gb*
 +
  a3d8780a69ceca6c5462c80c5a061dbba7df91d9111e08e718ecf55420302b91  bbxm-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz
 +
 
 +
Windows/Mac/Linux gui
 +
http://etcher.io
 +
 
 +
Linux: (dd)
 +
  xzcat bbxm-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
 +
 
 +
=== All BeagleBone Variants and PocketBeagle===
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io
 +
 
 +
User: ubuntu
 +
pass: temppwd
 +
 
 +
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
 +
 
 +
Image Updated:
 +
*2020-03-12
 +
** All BeagleBone Variants and PocketBeagle: v4.19.94-ti-r36 kernel
 +
*2019-04-10
 +
** All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
 +
*2018-12-10
 +
** All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2020-03-12/microsd/bone-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz
 +
 
 +
Verify Image with:
 +
  sha256sum bone-ubuntu-18.04.4-console-armhf-2020-03-12-2gb*
 +
  4c41976f1f574a4786002482167fe6443d8c9f1bced86a174459ffeba1f5b780  bone-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz
 +
 
 +
Windows/Mac/Linux gui
 +
  http://etcher.io
 +
 
 +
Linux: (dd)
 +
  xzcat bone-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
 +
 
 +
=== BeagleBoard-X15 and BeagleBone AI===
  
Note: ubuntu normaly doesn't have a 'root' user, however if you add one, make sure too add ttyS2 to /etc/securetty  (by default ttyS0 & ttyS1 are already there)
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io
  
==Beagleboard: Install Kernel Image==
+
User: ubuntu
 +
pass: temppwd
  
===Script File===
+
Auto partition resize:
Note: this will be updated from time to time. (tested off course, may need "sudo apt-get install wget")
+
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
wget http://www.rcn-ee.com/deb/kernel/ubuntu-update-kernel.sh
+
Image Updated:
sudo /bin/bash ubuntu-update-kernel.sh
+
*2020-03-12
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
 +
*2019-04-10
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.14.108-ti-r104 kernel
 +
*2018-12-10
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.14.79-ti-r84 kernel
  
Note: vmlinuz symbolic link (yes <or> no)... Still not sure this matters, i select <yes>...
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2020-03-12/microsd/am57xx-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz
  
===Manual Method===
+
Verify Image with:
 +
sha256sum am57xx-ubuntu-18.04.4-console-armhf-2020-03-12-2gb*
 +
cd253167b43186c14c02e9e85ede006cd51336d5f8beae5b96765f494c24bd91  am57xx-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz
  
You can open/edit the ubuntu-update-kernel.sh to see latest version.
+
Windows/Mac/Linux gui
 +
http://etcher.io
  
  sudo apt-get install uboot-mkimage
+
Linux: (dd)
wget http://www.rcn-ee.com/deb/kernel/beagle/jaunty/v2.6.28-79d042a-oer10/linux-image-2.6.28-oer10_1.0jaunty_armel.deb
+
  xzcat am57xx-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
(or any listed here: http://www.rcn-ee.com/deb/kernel/beagle/jaunty/ )
 
sudo dpkg -i linux-image*
 
  
Extract linux-image's vmlinuz-* (we need this to create the uImage, uboot uses to boot)
+
= Method 2: Manual Install (no automatic scripts)=
dpkg -x linux-image* ./temp
 
  
Mount fat32 partition
+
Note, this section used to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
sudo mount /dev/mmcblk0p1 /mnt
 
  
Build uboot compatible image and copy to fat32 boot partition
+
== Beagle/Beagle xM ==
  sudo mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008000 -n "Linux" -d ./temp/boot/vmlinuz-*  /mnt/uImage
+
  http://eewiki.net/display/linuxonarm/BeagleBoard
  
unmount fat32 partition
+
== BeagleBone ==
  sudo umount /mnt
+
  http://eewiki.net/display/linuxonarm/BeagleBone
  
Clean up
+
== BeagleBone Black ==
  rm -rfd temp
+
  http://eewiki.net/display/linuxonarm/BeagleBone+Black
  
Reboot with your new uImage
+
== Panda/Panda ES ==
 +
http://eewiki.net/display/linuxonarm/PandaBoard
  
 
= Advanced =
 
= Advanced =
== Upgrade U-Boot ==
 
  
Using gparted, create a new 50MB Primary fat32 Partition on a blank SD card, or use your existing fat32 partition.
+
==Install Latest Kernel Image==
 +
 
 +
General apt syntax for searching and installing a specific kernel:
 +
sudo apt-get update
 +
sudo apt-cache search linux-image | grep <branch>
 +
sudo apt-get install linux-image-<specific version>
 +
sudo reboot
 +
 
 +
Latest kernel script
 +
cd /opt/scripts/tools/
 +
git pull
 +
sudo ./update_kernel.sh <OPTIONS>
 +
 
 +
== 3.8.x ==
 +
This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy
 +
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
 +
 
 +
3.8.x BeagleBone/BeagleBone Black FULL Cape Support
 +
--bone-channel --stable
 +
 
 +
3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
 +
--bone-xenomai-channel --stable
 +
 
 +
== 4.9.x-ti ==
 +
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.9
 +
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.9.y
 +
 
 +
4.9.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
 +
--ti-channel --lts-4_9
 +
 
 +
4.9.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
 +
--ti-rt-channel --lts-4_9
 +
 
 +
4.9.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + Xenomai
 +
--ti-xenomai-channel --lts-4_9
 +
 
 +
== 4.14.x-ti ==
 +
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.14
 +
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.14.y
 +
 
 +
4.14.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
 +
--ti-channel --lts-4_14
 +
 
 +
4.14.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
 +
--ti-rt-channel --lts-4_14
 +
 
 +
== Mainline (4.9.x lts) ==
 +
 
 +
4.9.x BeagleBone/BeagleBone Black
 +
--bone-kernel --lts-4_9
 +
 
 +
4.9.x BeagleBone/BeagleBone Black + RT
 +
--bone-rt-kernel --lts-4_9
 +
 
 +
== Mainline (4.14.x lts) ==
 +
 
 +
4.14.x BeagleBone/BeagleBone Black
 +
--bone-kernel --lts-4_14
 +
 
 +
4.14.x BeagleBone/BeagleBone Black + RT
 +
--bone-rt-kernel --lts-4_14
 +
 
 +
Reboot with your new Kernel Image.
 +
 
 +
== Xorg Drivers ==
 +
 
 +
Script:
 +
cd /opt/scripts/tools/
 +
git pull
 +
 
 +
BeagleBoard/PandaBoard:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-omapdrm.sh
 +
 
 +
BeagleBone/BeagleBone Black:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-tilcdc.sh
 +
 
 +
== SGX Drivers ==
 +
 
 +
=== SGX BeagleBone/BeagleBone Black ===
 +
 
 +
Note, these are FBDEV only, no xorg/x11/etc...
 +
 
 +
Install the "4.1.x" lts/bone kernel:
 +
http://elinux.org/BeagleBoardUbuntu#Mainline_.28lts.29
 +
 
 +
Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
 +
git clone https://github.com/RobertCNelson/bb-kernel.git
 +
cd bb-kernel/
 +
git checkout origin/am33x-v4.1 -b tmp-sgx
 +
./sgx_create_package.sh
 +
 
 +
Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
 +
sudo tar xfv GFX_5.01.01.02.tar.gz -C /
 +
cd /opt/gfxinstall/
 +
sudo ./sgx-install.sh
 +
sudo reboot
 +
 
 +
Verify omaplfb & pvrsrvkm loaded
 +
debian@arm:~$ lsmod | grep omaplfb
 +
omaplfb                12065  0
 +
pvrsrvkm              178782  1 omaplfb
 +
 
 +
== Xorg Drivers ==
 +
 
 +
Script:
 +
cd /opt/scripts/tools/
 +
git pull
 +
 
 +
BeagleBoard/PandaBoard:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-omapdrm.sh
 +
 
 +
BeagleBone/BeagleBone Black:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-tilcdc.sh
 +
 
 +
= Swapfile =
 +
 
 +
== Using a File for Swap Instead of a Partition ==
 +
 
 +
On the Beagleboard you should expect to require a swap file given the limitation of how little RAM is available (between 256&nbsp;MB and 512&nbsp;MB). Some system programs like apt-get will only run properly when some swap space is present (due to 256&nbsp;MB not being enough RAM).
 +
 
 +
Some images (such as those from Linaro.org) do not come with a swap partition or any swap space allocated.
 +
 
 +
Under Linux, swap space can be either a dedicated partition or a swap file. Both can be mounted as swap which the OS can access.
 +
 
 +
=== Creating a Swapfile ===
 +
 
 +
The following commands will create a 1 GB file, limit access only to root, format it as swap and then make it available to the OS:
 +
 
 +
sudo mkdir -p /var/cache/swap/ 
 +
sudo dd if=/dev/zero of=/var/cache/swap/swapfile bs=1M count=1024
 +
sudo chmod 0600 /var/cache/swap/swapfile
 +
sudo mkswap /var/cache/swap/swapfile
 +
sudo swapon /var/cache/swap/swapfile
 +
 
 +
To tell the OS to load this swapfile on each start up, edit the /etc/fstab file to include the following additional line:
 +
 
 +
/var/cache/swap/swapfile    none    swap    sw    0  0
 +
 
 +
To verify that the swapfile is accessilble as swap to the OS, run "top" or "htop" at a console.
 +
 
 +
= Ubuntu Software =
 +
 
 +
== Wi-Fi Networking (command line) ==
 +
 
 +
=== /etc/network/interfaces ===
 +
 
 +
It is relatively easy to configure a Wi-Fi card from the command line.
 +
 
 +
You will need to edit the /etc/network/interfaces file. There are several guides available via Google.
 +
 
 +
This is a particularly useful guide https://ubuntuforums.org/showthread.php?t=202834
 +
 
 +
A sample /etc/network/interfaces file for a WPA2 encrypted access point is:
 +
 
 +
auto lo
 +
iface lo inet loopback
 +
auto wlan0
 +
iface wlan0 inet dhcp
 +
wpa-driver wext
 +
wpa-ssid <NAME OF AP>
 +
wpa-ap-scan 1
 +
wpa-proto RSN
 +
wpa-pairwise CCMP
 +
wpa-group CCMP
 +
wpa-key-mgmt WPA-PSK
 +
wpa-psk <INSERT KEY XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX>
 +
 
 +
Your Wi-Fi card will automatically load these settings upon startup and initialize wireless network access.
 +
 
 +
== Lightweight window managers ==
 +
 
 +
If you intend to use Ubuntu on the BeagleBoard you can install JWM or IceWM to improve performance.
 +
 
 +
JWM in particular uses little RAM. On a BeagleBoard with 256&nbsp;MB, using JWM will leave about 60&nbsp;MB free in which to run applications.
 +
 
 +
== Web Apps ==
 +
 
 +
=== Midori ===
 +
Given that the BeagleBoard has fewer resources than a desktop a lightweight browser is more responsive. Midori is a lightweight browser that still supports flash, etc. It is available from the standard repositories:
 +
http://en.wikipedia.org/wiki/Midori_%28web_browser%29
 +
 
 +
== Surveillance ==
 +
 
 +
=== Motion ===
 +
If you have a video source (webcam, IP cam, etc.) which appears as /dev/video0, etc. then you can use the Linux surveillance software "motion" to monitor the video stream and record periods of activity.
 +
 
 +
Motion is also available from the standard repositories:
 +
http://www.debian-administration.org/article/An_Introduction_to_Video_Surveillance_with_%27Motion%27
 +
Using a 960x720 resolution webcam with a 15&nbsp;fps rate under the UVC driver the Rev C BeagleBoard under Xubuntu reports ~60% CPU utilisation.
 +
 
 +
To make the BeagleBoard automatically start recording on boot, do the following:
 +
 
 +
* Auto Login - run "gdmsetup" from a terminal and select a user to automatically login
 +
* Sessions - make sure you don't save any previous X Windows sessions so that it doesn't prompt you for which one you want
 +
* motion.conf - edit /etc/motion/motion.conf to use the settings you want (that is, video output directory, record only video, record in MPEG-4, set frame rate, etc). Do this with "sudo medit /etc/motion/motion.conf" at a prompt.
 +
* Boot script - create a new script in /etc/rc2.d called "S65motion_client" and set permissions appropriately ("sudo chmod 777 /etc/rc2.d/S65motion_client"). Then edit the file so it contains the following lines:
 +
 
 +
#! /bin/sh
 +
/usr/bin/motion -c /etc/motion/motion.conf
 +
 
 +
This will now launch the motion client as root when you boot up.
  
wget http://www.angstrom-distribution.org/demo/beagleboard/u-boot.bin
+
Also note that unless your BeagleBoard can remember the time (battery backed up clock installed), the timestamps will not be correct until you update the time. If your BeagleBoard has an Internet connection this can be achieved using the ntpdate application.
cp u-boot.bin /media/disk
 
  
Tested with (U-Boot 2009.01-00013-g52eddcd (Feb 03 2009 - 22:25:11))
+
== Robotics ==
Archive: http://rcn-ee.homeip.net:81/dl/omap/uboot/u-boot-beagle-04feb2009.bin
 
  
Insert SD Card, boot Beagleboard and stop U-Boot 1.3.x (OR) 2008+
+
=== ROS ===
mmcinit
+
ROS (Robot Operating System) provides libraries and tools to help software developers create robot applications. It provides hardware abstraction, device drivers, libraries, visualizers, message-passing, package management, and more. ROS is licensed under an open source, BSD license.
fatload mmc 0 0x80200000 u-boot.bin
 
nand unlock
 
nand ecc sw (OR) nandecc sw
 
nand erase 80000 160000
 
nand write.i 0x80200000 80000 160000
 
reset
 
  
== U-Boot Script Files ==
+
There are currently builds of ROS for Ubuntu Bionic armhf. These builds include most but not all packages, and save a considerable amount of time compared to doing a full source-based installation:
  
uboot-mkimage package is required
+
http://wiki.ros.org/melodic/Installation/Ubuntu
  
contents of ubuntu-ext3.cmd
+
Alternatively ROS can be installed from source and is generally easy to do so (although slow).
setenv bootcmd 'fatload mmc 0:1 0x80200000 uImage; bootm 0x80200000'
 
setenv bootargs 'console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rootdelay=2 rootfstype=ext3 ro omap-dss.def_disp=lcd omapfb.video_mode=1280x720MR-24@60'
 
boot
 
  
Create *.scr file
+
For more information about ROS, see www.ros.org.
mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "Boot Time Label" -d ubuntu-ext3.cmd ubuntu-ext3.scr
 

Latest revision as of 08:47, 13 March 2020

(For BeagleBoardAngstrom, click here.) (Should Beagleboard:Ubuntu On BeagleBone Black be merged into this page?)

This page is about running a Linux distribution (ARM EABI) Ubuntu on the BeagleBoard. BeagleBoard will boot the (ARM EABI) Ubuntu distribution from the SD card. Since much of this page is generic, it has also been extended to help support devices such as the PandaBoard and BeagleBone.

  • For the best experience, make sure you have an LCD/HDMI monitor attached to the BeagleBoard's HDMI port, 2 GB/4 GB/8 GB SD card, and a known good USB 2.0 hub with mouse and keyboard.

Help

If you need any help:

  • Ubuntu related help:
    • #ubuntu-arm: Ubuntu's ARM IRC on Freenode (logs -> year -> month -> day -> #ubuntu-arm.html)
  • When requesting help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Required Beagle Software

Mainline U-Boot:

  • All older BeagleBoard (classic) Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Omap Serial Changes

boot.scr/boot.cmd changes:

With 2.6.35:

console=ttyS2,115200n8

With 2.6.36/37+:

console=ttyO2,115200n8

Serial console login: /etc/init/ttyO2.conf

start on stopped rc RUNLEVEL=[2345]
stop on runlevel [!2345]

respawn
exec /sbin/getty 115200 ttyO2

Method 1: Download a Complete Pre-Configured Image

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v5.4.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.19.y -b tmp
./build_kernel.sh

Ubuntu (18.04.4)

Default username/password:

  • username: ubuntu
  • password: temppwd

Image Updated:

  • 2020-03-12
    • BeagleBoard xM: v5.4.24-armv7-x20 kernel
    • All BeagleBone Variants and PocketBeagle: v4.19.94-ti-r36 kernel
    • BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
  • 2019-04-10
    • BeagleBoard xM: v4.19.31-armv7-x31 kernel
    • All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
    • BeagleBoard-X15: v4.14.108-ti-r104 kernel
  • 2018-12-10
    • BeagleBoard xM: v4.19.8-armv7-x11 kernel
    • All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel
    • BeagleBoard-X15: v4.14.79-ti-r84 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) (Windows/Linux) http://192.168.7.2, (Mac/Linux) http://192.168.6.2
SSH, Port 22: ssh ubuntu@arm.local (Bone: via usb) (Windows/Linux) ubuntu@192.168.7.2, (Mac/Linux) ubuntu@192.168.6.2
Getty, Serial Port

Default user: ubuntu pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/elinux/ubuntu-18.04.4-console-armhf-2020-03-12.tar.xz

Verify Image with:

sha256sum ubuntu-18.04.4-console-armhf-2020-03-12.tar.xz
abe086f9132dfe8e8b9df8d14da225e0ce89a082abc92515de8a2ac63fc54ae2  ubuntu-18.04.4-console-armhf-2020-03-12.tar.xz

Unpack Image:

tar xf ubuntu-18.04.4-console-armhf-2020-03-12.tar.xz
cd ubuntu-18.04.4-console-armhf-2020-03-12

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • All BeagleBone Variants - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 (BeagleBone AI) - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2020.03 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_ubuntu_bionic_armhf

Flasher

eMMC: All BeagleBone Variants with eMMC

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On boot-up the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the Ethernet jack. Progress is reported on both the serial debug and HDMI connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Ubuntu will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: ubuntu pass: temppwd

Image Updated:

  • 2020-03-12
    • All BeagleBone Variants with eMMC: v4.19.94-ti-r36 kernel
  • 2019-04-10
    • All BeagleBone Variants with eMMC: v4.14.108-ti-r104 kernel
  • 2018-12-10
    • All BeagleBone Variants with eMMC: v4.14.79-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/flasher/bone-eMMC-flasher-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum bone-eMMC-flasher-ubuntu-18.04.4-console-armhf-2020-03-12-2gb*
2bc7f92df84dbd89c1cdd790ec794926a5d6b0f0b891143085d77141170518e2  bone-eMMC-flasher-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bone-eMMC-flasher-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX

eMMC: BeagleBoard-X15 and BeagleBone AI

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On boot-up the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the Ethernet jack. Progress is reported on both the serial debug and HDMI connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Ubuntu will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: ubuntu pass: temppwd

Image Updated:

  • 2020-03-12
    • BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
  • 2019-04-10
    • BeagleBoard-X15 (and BeagleBone AI): v4.14.108-ti-r104 kernel
  • 2018-12-10
    • BeagleBoard-X15 (and BeagleBone AI): v4.14.79-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/flasher/am57xx-eMMC-flasher-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum am57xx-eMMC-flasher-ubuntu-18.04.4-console-armhf-2020-03-12-2gb*
0c359f2b5e9d27d167f55877d3abfea0af2fe721463136f354dfd5d72be8a541  am57xx-eMMC-flasher-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat am57xx-eMMC-flasher-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX

raw microSD img

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io

User: ubuntu pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2020-03-12
    • BeagleBoard xM: v5.4.24-armv7-x20 kernel
  • 2019-04-10
    • BeagleBoard xM: v4.19.31-armv7-x31 kernel
  • 2018-12-10
    • BeagleBoard xM: v4.19.8-armv7-x11 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/microsd/bbxm-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum bbxm-ubuntu-18.04.4-console-armhf-2020-03-12-2gb*
a3d8780a69ceca6c5462c80c5a061dbba7df91d9111e08e718ecf55420302b91  bbxm-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbxm-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX

All BeagleBone Variants and PocketBeagle

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io

User: ubuntu pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2020-03-12
    • All BeagleBone Variants and PocketBeagle: v4.19.94-ti-r36 kernel
  • 2019-04-10
    • All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
  • 2018-12-10
    • All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/microsd/bone-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum bone-ubuntu-18.04.4-console-armhf-2020-03-12-2gb*
4c41976f1f574a4786002482167fe6443d8c9f1bced86a174459ffeba1f5b780  bone-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bone-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX

BeagleBoard-X15 and BeagleBone AI

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io

User: ubuntu pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2020-03-12
    • BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
  • 2019-04-10
    • BeagleBoard-X15 (and BeagleBone AI): v4.14.108-ti-r104 kernel
  • 2018-12-10
    • BeagleBoard-X15 (and BeagleBone AI): v4.14.79-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/microsd/am57xx-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum am57xx-ubuntu-18.04.4-console-armhf-2020-03-12-2gb*
cd253167b43186c14c02e9e85ede006cd51336d5f8beae5b96765f494c24bd91  am57xx-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat am57xx-ubuntu-18.04.4-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX

Method 2: Manual Install (no automatic scripts)

Note, this section used to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Advanced

Install Latest Kernel Image

General apt syntax for searching and installing a specific kernel:

sudo apt-get update
sudo apt-cache search linux-image | grep <branch>
sudo apt-get install linux-image-<specific version>
sudo reboot

Latest kernel script

cd /opt/scripts/tools/
git pull
sudo ./update_kernel.sh <OPTIONS>

3.8.x

This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
3.8.x BeagleBone/BeagleBone Black FULL Cape Support
--bone-channel --stable
3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
--bone-xenomai-channel --stable

4.9.x-ti

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.9
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.9.y
4.9.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
--ti-channel --lts-4_9
4.9.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
--ti-rt-channel --lts-4_9
4.9.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + Xenomai
--ti-xenomai-channel --lts-4_9

4.14.x-ti

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.14
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.14.y
4.14.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
--ti-channel --lts-4_14
4.14.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
--ti-rt-channel --lts-4_14

Mainline (4.9.x lts)

4.9.x BeagleBone/BeagleBone Black
--bone-kernel --lts-4_9
4.9.x BeagleBone/BeagleBone Black + RT
--bone-rt-kernel --lts-4_9

Mainline (4.14.x lts)

4.14.x BeagleBone/BeagleBone Black
--bone-kernel --lts-4_14
4.14.x BeagleBone/BeagleBone Black + RT
--bone-rt-kernel --lts-4_14

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install the "4.1.x" lts/bone kernel: http://elinux.org/BeagleBoardUbuntu#Mainline_.28lts.29

Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v4.1 -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.02.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

Swapfile

Using a File for Swap Instead of a Partition

On the Beagleboard you should expect to require a swap file given the limitation of how little RAM is available (between 256 MB and 512 MB). Some system programs like apt-get will only run properly when some swap space is present (due to 256 MB not being enough RAM).

Some images (such as those from Linaro.org) do not come with a swap partition or any swap space allocated.

Under Linux, swap space can be either a dedicated partition or a swap file. Both can be mounted as swap which the OS can access.

Creating a Swapfile

The following commands will create a 1 GB file, limit access only to root, format it as swap and then make it available to the OS:

sudo mkdir -p /var/cache/swap/   
sudo dd if=/dev/zero of=/var/cache/swap/swapfile bs=1M count=1024
sudo chmod 0600 /var/cache/swap/swapfile 
sudo mkswap /var/cache/swap/swapfile 
sudo swapon /var/cache/swap/swapfile 

To tell the OS to load this swapfile on each start up, edit the /etc/fstab file to include the following additional line:

/var/cache/swap/swapfile    none    swap    sw    0   0

To verify that the swapfile is accessilble as swap to the OS, run "top" or "htop" at a console.

Ubuntu Software

Wi-Fi Networking (command line)

/etc/network/interfaces

It is relatively easy to configure a Wi-Fi card from the command line.

You will need to edit the /etc/network/interfaces file. There are several guides available via Google.

This is a particularly useful guide https://ubuntuforums.org/showthread.php?t=202834

A sample /etc/network/interfaces file for a WPA2 encrypted access point is:

auto lo
iface lo inet loopback
auto wlan0
iface wlan0 inet dhcp
wpa-driver wext
wpa-ssid <NAME OF AP>
wpa-ap-scan 1
wpa-proto RSN
wpa-pairwise CCMP
wpa-group CCMP
wpa-key-mgmt WPA-PSK
wpa-psk <INSERT KEY XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX>

Your Wi-Fi card will automatically load these settings upon startup and initialize wireless network access.

Lightweight window managers

If you intend to use Ubuntu on the BeagleBoard you can install JWM or IceWM to improve performance.

JWM in particular uses little RAM. On a BeagleBoard with 256 MB, using JWM will leave about 60 MB free in which to run applications.

Web Apps

Midori

Given that the BeagleBoard has fewer resources than a desktop a lightweight browser is more responsive. Midori is a lightweight browser that still supports flash, etc. It is available from the standard repositories: http://en.wikipedia.org/wiki/Midori_%28web_browser%29

Surveillance

Motion

If you have a video source (webcam, IP cam, etc.) which appears as /dev/video0, etc. then you can use the Linux surveillance software "motion" to monitor the video stream and record periods of activity.

Motion is also available from the standard repositories: http://www.debian-administration.org/article/An_Introduction_to_Video_Surveillance_with_%27Motion%27 Using a 960x720 resolution webcam with a 15 fps rate under the UVC driver the Rev C BeagleBoard under Xubuntu reports ~60% CPU utilisation.

To make the BeagleBoard automatically start recording on boot, do the following:

  • Auto Login - run "gdmsetup" from a terminal and select a user to automatically login
  • Sessions - make sure you don't save any previous X Windows sessions so that it doesn't prompt you for which one you want
  • motion.conf - edit /etc/motion/motion.conf to use the settings you want (that is, video output directory, record only video, record in MPEG-4, set frame rate, etc). Do this with "sudo medit /etc/motion/motion.conf" at a prompt.
  • Boot script - create a new script in /etc/rc2.d called "S65motion_client" and set permissions appropriately ("sudo chmod 777 /etc/rc2.d/S65motion_client"). Then edit the file so it contains the following lines:
#! /bin/sh
/usr/bin/motion -c /etc/motion/motion.conf

This will now launch the motion client as root when you boot up.

Also note that unless your BeagleBoard can remember the time (battery backed up clock installed), the timestamps will not be correct until you update the time. If your BeagleBoard has an Internet connection this can be achieved using the ntpdate application.

Robotics

ROS

ROS (Robot Operating System) provides libraries and tools to help software developers create robot applications. It provides hardware abstraction, device drivers, libraries, visualizers, message-passing, package management, and more. ROS is licensed under an open source, BSD license.

There are currently builds of ROS for Ubuntu Bionic armhf. These builds include most but not all packages, and save a considerable amount of time compared to doing a full source-based installation:

http://wiki.ros.org/melodic/Installation/Ubuntu

Alternatively ROS can be installed from source and is generally easy to do so (although slow).

For more information about ROS, see www.ros.org.