BeagleBoard Zippy2
Hardware
The BeagleBuddy Zippy Ethernet Combo Board is an expansion board for the BeagleBoard that adds the following:
- Battery Backed RTC
- Second MMC slot
- 10BaseT Ethernet
- Second RS-232
- +5V level I2C
- AT24 EEPROM
Software
- patches in oe git
- Demo/Test Files
- MLO (save as MLO)
- u-boot.bin (save as u-boot.bin)
- uImage (save as uImage)
- Kernel Config
- place these files on your formated SD card per the instuctions at the LinuxBootDiskFormat page
- boot your BeagleBoard while holding down the "User" button.