Difference between revisions of "Beagleboard:BeagleBone Black Capes"
Line 1: | Line 1: | ||
* The BeagleBone Black essential is an original BeagleBone with three virtual capes: | * The BeagleBone Black essential is an original BeagleBone with three virtual capes: | ||
** Memory Cape for on board eMMC (using MMC signals P8[25:20] and P8[6:3]) | ** Memory Cape for on board eMMC (using MMC signals P8[25:20] and P8[6:3]) | ||
− | ** HDMI Cape for on board video (using LCD signals P8[ | + | ** HDMI Cape for on board video (using LCD signals P8[46:27]) |
** Audio Cape for audio through HDMI (using general signals P8[19:7]) | ** Audio Cape for audio through HDMI (using general signals P8[19:7]) | ||
* When adding a Cape to the BeagleBone Black, if the same signals are used for the on board virtual capes, then only one of these devices can be supported at a time. | * When adding a Cape to the BeagleBone Black, if the same signals are used for the on board virtual capes, then only one of these devices can be supported at a time. | ||
* Each cape is listed with a column to indicate if the cape uses any of the same signals as the virtual cape for each: | * Each cape is listed with a column to indicate if the cape uses any of the same signals as the virtual cape for each: | ||
** MMC signals P8[25:20] and P8[6:3] | ** MMC signals P8[25:20] and P8[6:3] | ||
− | ** LCD signals P8[ | + | ** LCD signals P8[46:27] |
** General signals P8[19:7] | ** General signals P8[19:7] | ||
<br> | <br> | ||
Line 12: | Line 12: | ||
{|border="3" | {|border="3" | ||
|+ | |+ | ||
− | !Board||Mechanical||P9-Battery||LCD P8[ | + | !Board||Mechanical||P9-Battery||LCD P8[46:27]||EMMC P8[25:20] P8[6:3]||General P8[19:7]||Hardware Support||Software Support||Support Planned |
|- style="background:green" | |- style="background:green" | ||
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED | |Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED |
Revision as of 21:19, 15 May 2013
- The BeagleBone Black essential is an original BeagleBone with three virtual capes:
- Memory Cape for on board eMMC (using MMC signals P8[25:20] and P8[6:3])
- HDMI Cape for on board video (using LCD signals P8[46:27])
- Audio Cape for audio through HDMI (using general signals P8[19:7])
- When adding a Cape to the BeagleBone Black, if the same signals are used for the on board virtual capes, then only one of these devices can be supported at a time.
- Each cape is listed with a column to indicate if the cape uses any of the same signals as the virtual cape for each:
- MMC signals P8[25:20] and P8[6:3]
- LCD signals P8[46:27]
- General signals P8[19:7]
Board | Mechanical | P9-Battery | LCD P8[46:27] | EMMC P8[25:20] P8[6:3] | General P8[19:7] | Hardware Support | Software Support | Support Planned |
---|---|---|---|---|---|---|---|---|
Breakout Cape | PASS | NC | PASS | PASS | PASS | YES | NONE REQUIRED | APPROVED |
Breadboard Cape | PASS | NC | PASS | PASS | PASS | YES | NONE REQUIRED | APPROVED |
Battery Cape | PASS | NC | PASS | PASS | PASS | YES | NONE REQUIRED | APPROVED |
RS-232 Cape | PASS | NC | PASS | PASS | PASS | YES | NO | YES |
RS-485 Cape | PASS | NC | PASS | USED | PASS | YES | NO | YES |
CAN Bus Cape | PASS | NC | PASS | PASS | PASS | YES | NO | YES |
Weather Cape | PASS | NC | PASS | PASS | PASS | YES | NO | YES |
Audio Cape | PASS | NC | PASS | PASS | PASS | YES | NO | YES |
LCD3 Cape | PASS | NC | USED | PASS | PASS | YES | NO | YES |
LCD4 Cape | PASS | NC | USED | PASS | PASS | YES | NO | YES |
LCD7 Cape | PASS | NC | USED | PASS | PASS | YES | NO | YES |
3.1MP Camera Cape | PASS | NC | PASS | USED | USED | YES | NO | YES |
HDMI Cape | PASS | NC | USED | USED | USED | YES | NO | NO |
DVI-D Cape | PASS | NC | USED | PASS | PASS | YES | NO | NO |
DVI-D w/Audio Cape | PASS | NC | USED | PASS | PASS | YES | NO | NO |
Memory Cape | PASS | NC | USED | USED | USED | YES | NO | NO |
TiWi-5E Cape | PASS | NC | USED | USED | USED | NO | NO | NO |
TiWi-BLE Cape | PASS | NC | USED | USED | USED | NO | NO | NO |