Revision as of 05:28, 17 July 2022

See the blog post on BeagleBoard.org for an introduction.^[1]

This is a list of symlink interfaces based on BeagleBone Cape header pins.^[2]^[3]^[4]

Below, when mentioning "Black", this is true for all AM3358-based BeagleBone boards. "AI" is AM5729-based. "AI-64" is TDA4VM-based.

Overall

BeagleBone Cape header definition
P9				P8
Functions	odd	even	Functions	Functions	odd	even	Functions
USB D+	E1	E2	USB D-	-	-	-	-
5V OUT	E3	E4	GND	-	-	-	-
GND	1	2	GND	GND	1	2	GND
3V3 OUT	3	4	3V3 OUT	D M	3	4	D M
5V IN	5	6	5V IN	D M	5	6	D M
5V OUT	7	8	5V OUT	C2r D	7	8	C2t D
PWR BUT	9	10	RESET	D	9	10	D
D U4r	11	12	D	D P0o	11	12	D Q2a P0o
D U4t	13	14	D E1a	D E2b	13	14	D
D	15	16	D E1b	D P0i	15	16	D P0i
D I1c S00	17	18	D I1d S0o	D	17	18	D
C0r D I2c	19	20	C0t D I2d	D E2a	19	20	D M P1
D E0b S0i U2t	21	22	D E0a S0c U2r	D M P1	21	22	D M Q2b
D S01	23	24	C1r D I3c U1t	D M	23	24	D M
D P0	25	26	C1t D I3d U1r	D M	25	26	D
D P0 Q0b	27	28	D P0 S10	D L P1	27	28	D L P1
D E S1i P0	29	30	D P0 S1o	D L P1	29	30	D L P1
D E S1c P0	31	32	ADC VDD	D L	31	32	D L
A4	33	34	ADC GND	D L Q1b	33	34	D E L
A6	35	36	A5	D L Q1a	35	36	D E L
A2	37	38	A3	D L U5t	37	38	D L U5r
A0	39	40	A1	D L P1	39	40	D L P1
D P0	41	42	D Q0a S11 U3t P0	D L P1	41	42	D L P1
GND	43	44	GND	D L P1	43	44	D L P1
GND	45	46	GND	D E L P1	45	46	D E L P1

A: ADC
C: CAN
D: Digital GPIO
E: EHRPWM
I: I2C
L: LCD
M: MMC/SDIO
P: PRU
Q: eQEP
S: SPI
U: UART

LEDs

The compatibility layer comes with simple reference nodes for attaching LEDs to any gpio pin. The format followed for these nodes is led_P8_## / led_P9_##. The gpio-leds driver is used by these reference nodes internally and allows users to easily create compatible led nodes in overlays for Black, AI and AI-64. For the definitions, you can see bbai-bone-buses.dtsi#L16 & bbb-bone-buses.dtsi#L16.

Example overlays

Bone LEDs Overlays
Header	Pin	Overlay
P8	03	BONE-LED_P8_03.dts
P9	11	BONE-LED_P9_11.dts

Definitions

Bone LEDs
LED	Header pin	Black	AI	AI-64
/sys/class/leds/led_P8_03	P8_03	gpio1_6	gpio1_24	gpio0_20
/sys/class/leds/led_P8_04	P8_04	gpio1_7	gpio1_25	gpio0_48
/sys/class/leds/led_P8_05	P8_05	gpio1_2	gpio7_1	gpio0_33
/sys/class/leds/led_P8_06	P8_06	gpio1_3	gpio7_2	gpio0_34
/sys/class/leds/led_P8_07	P8_07	gpio2_2	gpio6_5	gpio0_15
/sys/class/leds/led_P8_08	P8_08	gpio2_3	gpio6_6	gpio0_14
/sys/class/leds/led_P8_09	P8_09	gpio2_5	gpio6_18	gpio0_17
/sys/class/leds/led_P8_10	P8_10	gpio2_4	gpio6_4	gpio0_16
/sys/class/leds/led_P8_11	P8_11	gpio1_13	gpio3_11	gpio0_60
/sys/class/leds/led_P8_12	P8_12	gpio1_12	gpio3_10	gpio0_59
/sys/class/leds/led_P8_13	P8_13	gpio0_23	gpio4_11	gpio0_89
/sys/class/leds/led_P8_14	P8_14	gpio0_26	gpio4_13	gpio0_75
/sys/class/leds/led_P8_15	P8_15	gpio1_15	gpio4_3	gpio0_61
/sys/class/leds/led_P8_16	P8_16	gpio1_14	gpio4_29	gpio0_62
/sys/class/leds/led_P8_17	P8_17	gpio0_27	gpio8_18	gpio0_3
/sys/class/leds/led_P8_18	P8_18	gpio2_1	gpio4_9	gpio0_4
/sys/class/leds/led_P8_19	P8_19	gpio0_22	gpio4_10	gpio0_88
/sys/class/leds/led_P8_20	P8_20	gpio1_31	gpio6_30	gpio0_76
/sys/class/leds/led_P8_21	P8_21	gpio1_30	gpio6_29	gpio0_30
/sys/class/leds/led_P8_22	P8_22	gpio1_5	gpio1_23	gpio0_5
/sys/class/leds/led_P8_23	P8_23	gpio1_4	gpio1_22	gpio0_31
/sys/class/leds/led_P8_24	P8_24	gpio1_1	gpio7_0	gpio0_6
/sys/class/leds/led_P8_25	P8_25	gpio1_0	gpio6_31	gpio0_35
/sys/class/leds/led_P8_26	P8_26	gpio1_29	gpio4_28	gpio0_51
/sys/class/leds/led_P8_27	P8_27	gpio2_22	gpio4_23	gpio0_71
/sys/class/leds/led_P8_28	P8_28	gpio2_24	gpio4_19	gpio0_72
/sys/class/leds/led_P8_29	P8_29	gpio2_23	gpio4_22	gpio0_73
/sys/class/leds/led_P8_30	P8_30	gpio2_25	gpio4_20	gpio0_74
/sys/class/leds/led_P8_31	P8_31	gpio0_10	gpio8_14	gpio0_32
/sys/class/leds/led_P8_32	P8_32	gpio0_11	gpio8_15	gpio0_26
/sys/class/leds/led_P8_33	P8_33	gpio0_9	gpio8_13	gpio0_25
/sys/class/leds/led_P8_34	P8_34	gpio2_17	gpio8_11	gpio0_7
/sys/class/leds/led_P8_35	P8_35	gpio0_8	gpio8_12	gpio0_24
/sys/class/leds/led_P8_36	P8_36	gpio2_16	gpio8_10	gpio0_8
/sys/class/leds/led_P8_37	P8_37	gpio2_14	gpio8_8	gpio0_106
/sys/class/leds/led_P8_38	P8_38	gpio2_15	gpio8_9	gpio0_105
/sys/class/leds/led_P8_39	P8_39	gpio2_12	gpio8_6	gpio0_69
/sys/class/leds/led_P8_40	P8_40	gpio2_13	gpio8_7	gpio0_70
/sys/class/leds/led_P8_41	P8_41	gpio2_10	gpio8_4	gpio0_67
/sys/class/leds/led_P8_42	P8_42	gpio2_11	gpio8_5	gpio0_68
/sys/class/leds/led_P8_43	P8_43	gpio2_8	gpio8_2	gpio0_65
/sys/class/leds/led_P8_44	P8_44	gpio2_9	gpio8_3	gpio0_66
/sys/class/leds/led_P8_45	P8_45	gpio2_6	gpio8_0	gpio0_79
/sys/class/leds/led_P8_46	P8_46	gpio2_7	gpio8_1	gpio0_80
/sys/class/leds/led_P9_11	P9_11	gpio0_30	gpio8_17	gpio0_1
/sys/class/leds/led_P9_12	P9_12	gpio1_28	gpio5_0	gpio0_45
/sys/class/leds/led_P9_13	P9_13	gpio0_31	gpio6_12	gpio0_2
/sys/class/leds/led_P9_14	P9_14	gpio1_18	gpio4_25	gpio0_93
/sys/class/leds/led_P9_15	P9_15	gpio1_16	gpio3_12	gpio0_47
/sys/class/leds/led_P9_16	P9_16	gpio1_19	gpio4_26	gpio0_94
/sys/class/leds/led_P9_17	P9_17	gpio0_5	gpio7_17	gpio0_28
/sys/class/leds/led_P9_18	P9_18	gpio0_4	gpio7_16	gpio0_40
/sys/class/leds/led_P9_19	P9_19	gpio0_13	gpio7_3	gpio0_78
/sys/class/leds/led_P9_20	P9_20	gpio0_12	gpio7_4	gpio0_77
/sys/class/leds/led_P9_21	P9_21	gpio0_3	gpio3_3	gpio0_39
/sys/class/leds/led_P9_22	P9_22	gpio0_2	gpio6_19	gpio0_38
/sys/class/leds/led_P9_23	P9_23	gpio1_17	gpio7_11	gpio0_10
/sys/class/leds/led_P9_24	P9_24	gpio0_15	gpio6_15	gpio0_13
/sys/class/leds/led_P9_25	P9_25	gpio3_21	gpio6_17	gpio0_127
/sys/class/leds/led_P9_26	P9_26	gpio0_14	gpio6_14	gpio0_12
/sys/class/leds/led_P9_27	P9_27	gpio3_19	gpio4_15	gpio0_46
/sys/class/leds/led_P9_28	P9_28	gpio3_17	gpio4_17	gpio1_11
/sys/class/leds/led_P9_29	P9_29	gpio3_15	gpio5_11	gpio0_53
/sys/class/leds/led_P9_30	P9_30	gpio3_16	gpio5_12	gpio0_44
/sys/class/leds/led_P9_31	P9_31	gpio3_14	gpio5_10	gpio0_52
/sys/class/leds/led_P9_33	P9_33	âŒ	âŒ	gpio0_50
/sys/class/leds/led_P9_35	P9_35	âŒ	âŒ	gpio0_55
/sys/class/leds/led_P9_36	P9_36	âŒ	âŒ	gpio0_56
/sys/class/leds/led_P9_37	P9_37	âŒ	âŒ	gpio0_57
/sys/class/leds/led_P9_38	P9_38	âŒ	âŒ	gpio0_58
/sys/class/leds/led_P9_39	P9_39	âŒ	âŒ	gpio0_54
/sys/class/leds/led_P9_40	P9_40	âŒ	âŒ	gpio0_81
/sys/class/leds/led_P9_41	P9_41	gpio0_20	gpio6_20	gpio1_0
/sys/class/leds/led_P9_91	P9_91	gpio3_20	âŒ	âŒ
/sys/class/leds/led_P9_42	P9_42	gpio0_7	gpio4_18	gpio0_123
/sys/class/leds/led_P9_92	P9_92	gpio3_18	âŒ	âŒ
/sys/class/leds/led_A15	A15	gpio0_19	âŒ	âŒ

I2C

Compatibility layer provides simple I2C bone bus nodes for creating compatible overlays for Black, AI and AI-64. The format followed for these nodes is bone_i2c_#. For the definitions, you can see bbai-bone-buses.dtsi#L388 & bbb-bone-buses.dtsi#L403.

Bone bus I2C
SYSFS	DT symbol	Black	AI	AI-64	SCL	SDA	Overlay
/dev/bone/i2c/0	bone_i2c_0	I2C0	I2C1	TBD	âŒ (On-board)
/dev/bone/i2c/1	bone_i2c_1	I2C1	I2C5	MAIN_I2C6	P9.17	P9.18	BONE-I2C1.dts
/dev/bone/i2c/2	bone_i2c_2	I2C2	I2C4	MAIN_I2C3	P9.19	P9.20	BONE-I2C2.dts
/dev/bone/i2c/2a	bone_i2c_2a	I2C2	N/A	TBD	P9.21	P9.22	BONE-I2C2A.dts
/dev/bone/i2c/3	bone_i2c_3	I2C1	I2C3	MAIN_I2C4	P9.24	P9.26	BONE-I2C3.dts

SPI

SPI bone bus nodes allow creating compatible overlays for Black, AI and AI-64. For the definitions, you can see bbai-bone-buses.dtsi#L406 & bbb-bone-buses.dtsi#L423.

Bone bus SPI
Bone bus	DT symbol	Black	AI	AI-64	SDO	SDI	CLK	CS	Overlay
/dev/bone/spi/0.x	bone_spi_0	SPI0	SPI2	MAIN_SPI6	P9.18	P9.21	P9.22	P9.17 (CS0) P9.23 (CS1 - BBAI and BBAI64 only)	BONE-SPI0_0.dts BBAI-SPI0_1.dts
/dev/bone/spi/1.x	bone_spi_1	SPI1	SPI3	MAIN_SPI7	P9.30	P9.29	P9.31	P9.28 (CS0) P9.42 (CS1)	BONE-SPI1_0.dts BONE-SPI1_1.dts

UART

UART bone bus nodes allow creating compatible overlays for Black, AI and AI-64. For the definitions, you can see bbai-bone-buses.dtsi#L367 & bbb-bone-buses.dtsi#L382.

Bone bus UART
Bone bus	Black	AI	AI-64	TX	RX	RTSn	CTSn	Overlays
/dev/bone/uart/0	UART0	UART1	MAIN_UART0	âŒ (console debug header pins)
/dev/bone/uart/1	UART1	UART10	MAIN_UART2	P9.24	P9.26	P9.19 P8.4 (N/A on AM3358)	P9.20 P8.3 (N/A on AM3358)	BONE-UART1.dts
/dev/bone/uart/2	UART2	UART3	-	P9.21	P9.22	P8.38 (N/A on AM5729)	P8.37 (N/A on AM5729)	BONE-UART2.dts
/dev/bone/uart/3	UART3	-	-	P9.42	âŒ	-	-	BONE-UART3.dts
/dev/bone/uart/4	UART4	UART5	MAIN_UART0 (console)	P9.13	P9.11	P8.33 (N/A on AM5729) P8.6 (N/A on AM3358)	P8.35 (N/A on AM5729) P8.5 (N/A on AM3358)	BONE-UART4.dts
/dev/bone/uart/5	UART5	UART8	MAIN_UART5	P8.37	P8.38	P8.32	P8.31	BONE-UART5.dts

CAN

CAN bone bus nodes allow creating compatible overlays for Black, AI and AI-64. For the definitions, you can see bbai-bone-buses.dtsi#L440 & bbb-bone-buses.dtsi#L457.

Bone bus CAN
Bone bus	Black	AI	AI-64	TX	RX	Overlays
/dev/bone/can/0	CAN0	-	TBD	P9.20	P9.19	BONE-CAN0.dts
/dev/bone/can/1	CAN1	CAN2	TBD	P9.26	P9.24	BONE-CAN1.dts
/dev/bone/can/2	-	CAN1 (rev A2 and later)	TBD	P8.8	P8.7

ADC

TODO: We need a udev rule to make sure the ADC shows up at /dev/bone/adc! There's nothing for sure that IIO devices will show up in the same place.
TODO: I think we can also create symlinks for each channel based on which device is there, such that we can do /dev/bone/adc/Px_y

Bone ADC
Black	AI	AI-64	overlay
Internal	External (STMPE811)	TBD	BONE-ADC.dts

Index	Header pin	Black/AI-64	AI
0	P9_39	in_voltage0_raw	in_voltage0_raw
1	P9_40	in_voltage1_raw	in_voltage1_raw
2	P9_37	in_voltage2_raw	in_voltage3_raw
3	P9_38	in_voltage3_raw	in_voltage2_raw
4	P9_33	in_voltage4_raw	in_voltage7_raw
5	P9_36	in_voltage5_raw	in_voltage6_raw
6	P9_35	in_voltage6_raw	in_voltage4_raw

PWM

PWM bone bus nodes allow creating compatible overlays for Black, AI and AI-64. For the definitions, you can see bbai-bone-buses.dtsi#L415 & bbb-bone-buses.dtsi#L432

Bone bus PWM
Bone bus	Black	AI	AI-64	A	B	Overlay
/dev/bone/pwm/0	PWM0	-	PWM1	P9.22	P9.21	BONE-PWM0.dts
/dev/bone/pwm/1	PWM1	PWM3	PWM2	P9.14	P9.16	BONE-PWM1.dts
/dev/bone/pwm/2	PWM2	PWM2	PWM0	P8.19	P8.13	BONE-PWM2.dts

TIMER PWM

TIMER PWM bone bus uses ti,omap-dmtimer-pwm driver, and timer nodes that allow creating compatible overlays for Black, AI and AI-64. For the timer node definitions, you can see bbai-bone-buses.dtsi#L449 & bbb-bone-buses.dtsi#L466.

Bone TIMER PWMs
Bone bus	Header pin	Black	AI	overlay
/sys/bus/platform/devices/bone_timer_pwm_0/	P8.10	timer6	timer10	BONE-TIMER_PWM_0.dts
/sys/bus/platform/devices/bone_timer_pwm_1/	P8.07	timer4	timer11	BONE-TIMER_PWM_1.dts
/sys/bus/platform/devices/bone_timer_pwm_2/	P8.08	timer7	timer12	BONE-TIMER_PWM_2.dts
/sys/bus/platform/devices/bone_timer_pwm_3/	P9.21	-	timer13	BONE-TIMER_PWM_3.dts
/sys/bus/platform/devices/bone_timer_pwm_4/	P8.09	timer5	timer14	BONE-TIMER_PWM_4.dts
/sys/bus/platform/devices/bone_timer_pwm_5/	P9.22	-	timer15	BONE-TIMER_PWM_5.dts

eCAP

TODO: This doesn't include any abstraction yet.

Black eCAP PWMs
Bone bus	Header pin	peripheral	overlay
/sys/bus/platform/drivers/ecap/48302100.ecap	P9.42	eCAP0_in_PWM0_out	BBB-ECAP0.dts
/sys/bus/platform/drivers/ecap/48304100.ecap	P9.28	eCAP2_in_PWM2_out	BBB-ECAP2.dts

AI eCAP PWMs
Bone bus	Header pin	peripheral	overlay
/sys/bus/platform/drivers/ecap/4843e100.ecap	P8.15	eCAP1_in_PWM1_out	BBAI-ECAP1.dts
/sys/bus/platform/drivers/ecap/48440100.ecap	P8.14	eCAP2_in_PWM2_out	BBAI-ECAP2.dts
/sys/bus/platform/drivers/ecap/48440100.ecap	P8.20	eCAP2_in_PWM2_out	BBAI-ECAP2A.dts
/sys/bus/platform/drivers/ecap/48442100.ecap	P8.04	eCAP3_in_PWM3_out	BBAI-ECAP3.dts
/sys/bus/platform/drivers/ecap/48442100.ecap	P8.26	eCAP3_in_PWM3_out	BBAI-ECAP3A.dts

eMMC

Bone eMMC
Black	AI	overlay
MMC2	MMC3	BONE-eMMC.dts

Header pin	Description
P8.3	DAT6
P8.4	DAT7
P8.5	DAT2
P8.6	DAT3
P8.20	CMD
P8.21	CLK
P8.22	DAT5
P8.23	DAT4
P8.24	DAT1
P8.25	DAT0

LCD

16bit LCD interface
Black	AI	overlay
lcdc	dss

Header pin	Description
P8_45	lcd_data0
P8_46	lcd_data1
P8_43	lcd_data2
P8_44	lcd_data3
P8_41	lcd_data4
P8_42	lcd_data5
P8_39	lcd_data6
P8_40	lcd_data7
P8_37	lcd_data8
P8_38	lcd_data9
P8_36	lcd_data10
P8_34	lcd_data11
P8_35	lcd_data12
P8_33	lcd_data13
P8_31	lcd_data14
P8_32	lcd_data15
P8_27	lcd_vsync
P8_29	lcd_hsync
P8_28	lcd_pclk
P8_30	lcd_ac_bias_en

eQEP

On BeagleBone's without an eQEP on specific pins, consider using the PRU to perform a software counter function.

Bone eQEP
Bone bus	Black	AI	AI-64	A	B	strobe	index
/dev/bone/counter/0	eQEP0	eQEP2	eQEP0	P9.42	P9.27	Black/AI-64: P9.25 AI: P8.06	Black/AI-64: P9.41 AI: P8.05
/dev/bone/counter/1	eQEP1	eQEP0	eQEP1	P8.35	P8.33	Black/AI-64: P8.32 AI: P9.21	Black/AI-64: P8.31 AI: ‒
/dev/bone/counter/2	eQEP2	eQEP1	‒	P8.12	P8.22	Black: P8.15 AI: P8.18	Black: P8.16 AI: P9.15

McASP

Bone McASP0
Black	AI	overlay
McASP0	McASP1

Header pin	Description
P9.12	aclkr
P9.25	ahclkx
P9.27	fsr
P9.28	Black: axr2 AI: axr9
P9.29	fsx
P9.30	Black: axr0 AI: axr10
P9.31	aclkx

PRU

The overlay situation for PRUs is a bit more complex than with other peripherals. The mechanism for loading, starting and stopping the PRUs can go through either UIO or RemoteProc.

/dev/remoteproc/prussX-coreY (AM3358 X = "", other x = "1|2")

Bone PRU eCAP
Header Pin	Black	AI
P8.15	pr1_ecap0	pr1_ecap0
P8.32	-	pr2_ecap0
P9.42	pr1_ecap0	-

AI PRU UART
UART	TX	RX	RTSn	CTSn	Overlays
PRU1 UART0	P8_31	P8_33	P8_34	P8_35
PRU2 UART0	P8_43	P8_44	P8_45	P8_46

Bone PRU
Header Pin	Black	AI
P8.03	-	pr2_pru0 10
P8.04	-	pr2_pru0 11
P8.05	-	pr2_pru0 06
P8.06	-	pr2_pru0 07
P8.07	-	pr2_pru1 16
P8.08	-	pr2_pru0 20
P8.09	-	pr2_pru1 06
P8.10	-	pr2_pru1 15
P8.11	pr1_pru0 15 (Out)	pr1_pru0 04
P8.12	pr1_pru0 14 (Out)	pr1_pru0 03
P8.13	-	pr1_pru1 07
P8.14	-	pr1_pru1 09
P8.15	pr1_pru0 15 (In)	pr1_pru1 16
P8.16	pr1_pru0 14 (In)	pr1_pru1 18
P8.17	-	pr2_pru0 15
P8.18	-	pr1_pru1 05
P8.19	-	pr1_pru1 06
P8.20	-	pr2_pru0 03
P8.21	-	pr2_pru0 02
P8.22	-	pr2_pru0 09
P8.23	-	pr2_pru0 08
P8.24	-	pr2_pru0 05
P8.25	-	pr2_pru0 04
P8.26	-	pr1_pru1 17
P8.27	-	pr2_pru1 17
P8.28	-	pr2_pru0 17
P8.29	-	pr2_pru0 18
P8.30	-	pr2_pru0 19
P8.31	-	pr2_pru0 11
P8.32	-	pr2_pru1 00
P8.33	-	pr2_pru0 10
P8.34	-	pr2_pru0 08
P8.35	-	pr2_pru0 09
P8.36	-	pr2_pru0 07
P8.37	-	pr2_pru0 05
P8.38	-	pr2_pru0 06
P8.39	-	pr2_pru0 03
P8.40	-	pr2_pru0 04
P8.41	-	pr2_pru0 01
P8.42	-	pr2_pru0 02
P8.43	-	pr2_pru1 20
P8.44	-	pr2_pru0 00
P8.45	-	pr2_pru1 18
P8.46	-	pr2_pru1 19
P9.11	-	pr2_pru0 14
P9.13	-	pr2_pru0 15
P9.14	-	pr1_pru1 14
P9.15	-	pr1_pru0 5
P9.16	-	pr1_pru1 15
P9.17	-	pr2_pru1 09
P9.18	-	pr2_pru1 08
P9.19	-	pr1_pru1 02
P9.20	-	pr1_pru1 01
P9.24	pr1_pru0 16 (In)	-
P9.25	pr1_pru0 07	pr2_pru1 05
P9.26	pr1_pru1 16 (In)	pr1_pru0 17
P9.27	pr1_pru0 05	pr1_pru1 11
P9.28	pr1_pru0 03	pr2_pru1 13
P9.29	pr1_pru0 01	pr2_pru1 11
P9.30	pr1_pru0 02	pr2_pru1 12
P9.31	pr1_pru0 00	pr2_pru1 10
P9.41	pr1_pru0 06	pr1_pru1 03
P9.42	pr1_pru0 04	pr1_pru1 10

GPIO

TODO
For each of the pins with a GPIO, there should be a symlink that comes from the names

Methodology

The methodology for applied in the kernel and software images to expose the software interfaces is to be documented here. The most fundamental elements are the device tree entries, including overlays, and udev rules.

Device Trees

udev rules ^[5]

10-of-symlink.rules^[6]

#From: https://github.com/mvduin/py-uio/blob/master/etc/udev/rules.d/10-of-symlink.rules
# allow declaring a symlink for a device in DT
ATTR{device/of_node/symlink}!="", \
	ENV{OF_SYMLINK}="%s{device/of_node/symlink}"

ENV{OF_SYMLINK}!="", ENV{DEVNAME}!="", \
	SYMLINK+="%E{OF_SYMLINK}", \
	TAG+="systemd", ENV{SYSTEMD_ALIAS}+="/dev/%E{OF_SYMLINK}"

TBD

#Also courtesy of mvduin
# create symlinks for gpios exported to sysfs by DT
SUBSYSTEM=="gpio", ACTION=="add", TEST=="value", ATTR{label}!="sysfs", \
        RUN+="/bin/mkdir -p /dev/bone/gpio", \
        RUN+="/bin/ln -sT '/sys/class/gpio/%k' /dev/bone/gpio/%s{label}"

Verification

TODO: The steps used to verify all of these configurations is to be documented here. It will serve to document what has been tested, how to reproduce the configurations, and how to verify each major triannual release. All faults will be documented in the issue tracker.

References

[1] Device Tree: Supporting Similar Boards - The BeagleBone Example

[2] Google drive with summary of expansion signals on various BeagleBoard.org designs

[3] TI Pinmux Helper

[4] Beagleboard:Cape Expansion Headers

[5] BeagleBoard customizations udev rules

[6] 10-of-symlink.rules

[1]

[2]

[3]

[4]

[5]

[6]

@@ Line 476: / Line 476: @@
 |-
 <!-- ! Bone bus! -->
-! Black !! AI !! AI-64 !! TX !! RX !! Overlays
+! Bone bus !! Black !! AI !! AI-64 !! TX !! RX !! Overlays
 |-
 | /dev/bone/can/0

Difference between revisions of "Beagleboard:BeagleBone cape interface spec"

Revision as of 05:28, 17 July 2022

Contents

Overall

LEDs

Example overlays

Definitions

I2C

SPI

UART

CAN

ADC

PWM

TIMER PWM

eCAP

eMMC

LCD

eQEP

McASP

PRU

GPIO

Methodology

Device Trees

udev rules ^[5]

10-of-symlink.rules^[6]

TBD

Verification

References

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Where else to find us

Tools

Difference between revisions of "Beagleboard:BeagleBone cape interface spec"

Revision as of 05:28, 17 July 2022

Contents

Overall

LEDs

Example overlays

Definitions

I2C

SPI

UART

CAN

ADC

PWM

TIMER PWM

eCAP

eMMC

LCD

eQEP

McASP

PRU

GPIO

Methodology

Device Trees

udev rules [5]

10-of-symlink.rules[6]

TBD

Verification

References

Navigation menu

Search

udev rules ^[5]

10-of-symlink.rules^[6]