Compiling OpenOCD v04 WinXP D2XX
This guide will compile OpenOCD 0.4.0 on Windows XP with the FTD2XX driver library, for use with the TinCanTools Flyswatter. The executable created with this guide is compatible with Windows XP and Windows 7. The process is identical on 32 and 64 bit versions of Windows.
This guide makes use of the GCC cross-compiler added to Cygwin on June 2, 2011. The cross-compiler makes compiling OpenOCD for Windows much easier. Older instructions can be found at Compiling OpenOCD for Windows XP (FTD2XX) - Pre June 2011.
Download and install Cygwin 1.7.9 from http://www.cygwin.com. Cygwin provides a GNU development environment for Windows, which will allow you to compile OpenOCD using the GNU Compiler Collection (GCC). You will not need Cygwin to run OpenOCD. The Cygwin installer is available at http://cygwin.com/install.html.
If you already have Cygwin installed, this guide recommends that you delete it and reinstall completely. Close all Cygwin windows and services and delete your Cygwin directory (by default, C:\cygwin). Then find any packages downloaded but not installed and delete them as well. You set the location of these files when you installed Cygwin. By default they appear in My Documents/Downloads. If you don't wish to reinstall Cygwin you can find more information at http://cygwin.com/ml/cygwin/2011-06/msg00021.html.
In the Cygwin installer you will be prompted to select additional packages to install. Install the following optional packages, found under the Devel heading:
- autoconf (all packages)
- automake (all packages)
- patch (found under the Utils heading)
Check all of these packages and click Next. Cygwin will inform you that it must install additional packages to satisfy the above packages' dependencies. Allow it to do so. Make sure that the Select Required Packages checkbox is checked before you proceed.
Installing libusb for the Flyswatter
Libusb is a usb driver library you will need to communicate with the Flyswatter. You will need a newer version of libusb than the one distributed through the Cygwin installer, and you will need libusb for Windows as well. Download libusb-win32-188.8.131.52 from http://sourceforge.net/projects/libusb-win32/files/libusb-win32-releases/184.108.40.206/libusb-win32-bin-220.127.116.11.zip/download. Open the zip archive and extract the contents to C:\cygwin\home.
Navigate to the folder \libusb-win32-bin-18.104.22.168\lib\gcc. Copy the file libusb.a to C:\cygwin\lib and C:\cygwin\usr\i686-pc-mingw32\sys-root\mingw\lib.
Navigate to \libusb-win32-bin-22.214.171.124\include. Copy the file usb.h to C:\cygwin\usr\include and C:\cygwin\usr\i686-pc-mingw32\sys-root\mingw\include.
Download version 2.08.14 of the D2XX Windows drivers from http://www.ftdichip.com/Drivers/D2XX.htm. Direct link is here: http://www.ftdichip.com/Drivers/CDM/CDM20814_WHQL_Certified.zip. Extract the contents to C:\cygwin\home\ftd2xx.
In Windows Explorer, open the ftd2xx folder and find the file ftd2xx.h. Copy this file to C:\cygwin\usr\include and C:\cygwin\usr\i686-pc-mingw32\sys-root\mingw\include.
Navigate to C:\cygwin\home\ftd2xx\i386 and find the file ftd2xx.lib. Copy it, rename the copy ftd2xx.a and copy the new file to C:\cygwin\usr\local\lib and C:\cygwin\usr\i686-pc-mingw32\sys-root\mingw\lib.
Plug the Flyswatter into your computer's USB port. The Windows Found New Hardware Wizard should appear. Choose "No, not this time" to decline to connect to Windows Update. On the next screen, choose "Install from a list of specific location." On the third screen, choose "Search for the best drivers in these locations," check "Include this location in the search," and enter C:\cygwin\home\ftd2xx.
Click Next. Windows should find and install the FTDI drivers. If you see a warning that the drivers have not passed Windows Logo testing, choose "Install Anyway."
The Found New Hardware Wizard should appear twice. The second time the wizard appears, repeat the process exactly as above.
A Note about Make Errors
With the latest version of Cygwin and its associated packages you may encounter errors with make commands. You may be able to fix these errors simply by powering through; if make gives an error, run make again. If it doesn't halt again in the same place, you can likely proceed without worry.
You may also encounter errors with the bootstrap command used to compile OpenOCD below. Try running bootstrap again. If it passes the point where it previously halted everything is most likely fine.
Download the OpenOCD 0.4.0 source from http://prdownload.berlios.de/openocd/openocd-0.4.0.zip and extract it to /home/openocd-0.4.0.
Installing the Flyswatter 2 / Flyswatter 3 Patch (Optional)
The OpenOCD Flyswatter 3 beta patch provides support for the Flyswatter3 and Flyswatter2, a config file for the Olimex PIC-P32MX development board, and an updated config file for the TinCanTools Hammer. Download the file Media:Openocd-fs3-b0.1.patch. (Right click the link and select Save As.) Save the file to your new openocd-0.4.0 directory.
In the Cygwin console window, navigate to the patch file and patch the source as follows:
cd ~/openocd-0.4.0 patch -p1 -i Openocd-fs3-b0.1.patch
For more information on the config files added by this patch, see OpenOCD Config Files.
In the Cygwin command window, navigate to the new folder containing the OpenOCD source and compile as follows.
cd /home/openocd-0.4.0 ./configure --disable-werror --enable-ft2232_ftd2xx --with-ftd2xx-win32-zipdir=../ftd2xx --build=i686-pc-cygwin --host=i686-pc-mingw32 make
Preparing to Run OpenOCD
Navigate to C:\cygwin\home\openocd\src to find openocd.exe. The executable can be run from the Windows command line and does not require Cygwin.
You can run openocd from C:\cygwin\home\openocd\src, but you may encounter problems with configuration files. For a more in-depth discussion of these issues, see OpenOCD Config File Paths. This guide recommends that you create a new folder containing OpenOCD and its config files. Go to Start Menu > My Computer and open your C: drive. Right-click anywhere in the C: drive window and select New > Folder. Rename the new folder openocd-bin.
In another Windows Explorer window, open C:\cygwin\home\openocd\tcl. Click and drag to select all the contents of the folder. Right-click on any file and select Copy. Open C:\openocd-bin, right-click anywhere, and select Paste.
Now go to C:\cygwin\home\openocd\src and copy openocd.exe to C:\openocd-bin. The folder should now contain the following files and folders:
board chip cpld cpu openocd.exe interface target test bitsbytes.tcl memory.tcl mmr_helpers.tcl readable.tcl