Difference between revisions of "Devkit8500FAQ"
Yclinda666 (talk | contribs) (DevKit8500 FAQ) |
Yclinda666 (talk | contribs) |
||
Line 4: | Line 4: | ||
==Why my new bought 7-inch LCD has no display when power on the board?== | ==Why my new bought 7-inch LCD has no display when power on the board?== | ||
− | Answer: This is a very normal problem. Embest default delivery is preloaded with 4.3-inch LCD image. User | + | Answer: This is a very normal problem. Embest default delivery is preloaded with 4.3-inch LCD image. User needs to change the image for 7-inch LCD. Please follow the document "Devkit8500 Quick User Manual.pdf" included in product DVD. <br> |
+ | |||
+ | ==Why the touch screen could not be used when getting into WinCE system?== | ||
+ | Answer: When getting into WinCE system, the LCD displays as below, there is no response if using finger to click the center cross. There might be two reasons: | ||
+ | 1. The touch screen is resistive touch screen, we suggest user using touch pen to click the center cross not finger; | ||
+ | 2. It needs about one second touching for calibration, if touching time is too short, the operation will be invalid. |
Revision as of 23:37, 12 December 2011
This page mainly summarizes solutions to some main problems during the development of Embest Devkit8500. Hope it would give you some help.
Hardware problem
Why my new bought 7-inch LCD has no display when power on the board?
Answer: This is a very normal problem. Embest default delivery is preloaded with 4.3-inch LCD image. User needs to change the image for 7-inch LCD. Please follow the document "Devkit8500 Quick User Manual.pdf" included in product DVD.
Why the touch screen could not be used when getting into WinCE system?
Answer: When getting into WinCE system, the LCD displays as below, there is no response if using finger to click the center cross. There might be two reasons: 1. The touch screen is resistive touch screen, we suggest user using touch pen to click the center cross not finger; 2. It needs about one second touching for calibration, if touching time is too short, the operation will be invalid.