Didj Common Commands
This is a collection of useful commands to have when accessing your Didj from the command prompt. Its meant as a quick reference guide, for more complex procedures look in the How To'ssection of the Didj Wiki main page.
Stop Start Restart
/etc/init.d/lightning (start | stop | restart)
Permanently Prevent Starting
First, make the root partition mountable.
In the /etc/rc.d folder, remove these files, or back them up to a different folder.
rm K50example rm S50example rm K51lightning rm S51lightning
USB File Storage
The USB mass_storage driver on the stock Didj, requires a few commands be run after its been connected to a host PC, before it will mount like a normal USB drive.
Mount on Host
usbctl -d mass_storage -a enable usbctl -d mass_storage -a unlock
Mount on Didj
usbctl -d mass_storage -a disable usbctl -d mass_storage -a lock
Normal Mount Command
Mount the /Didj file system
mount -t vfat -o async,noatime /dev/mtdblock9 /Didj
Make Root Partition Writable
(note) NAND partitions can not be shared by USB host and device simultaneously. Developers should use the usbctl command judiciously to avoid corrupting NAND.
mount -o remount, rw /
mount -t jffs2 $mfgdatamnt /mnt2/mfgfg
mount -o remount,rw /mfgdata
Power off the screen
mlc-control /dev/mlc s enable off