Difference between revisions of "Didj How to Extract Files"
KenMcGuire (talk | contribs) |
|||
Line 15: | Line 15: | ||
BTW here is how to mount the rootfs.jffs2 image onto the temp directory: | BTW here is how to mount the rootfs.jffs2 image onto the temp directory: | ||
+ | |||
+ | First load a few required modules. | ||
+ | |||
+ | For newer kernels (2.6.28+) | ||
+ | |||
+ | *modprobe mtdram | ||
+ | *modprobe jff2 | ||
+ | *modprobe mtdchar | ||
+ | *modprobe mtdblock | ||
+ | |||
+ | For older kernels | ||
*modprobe mtdcore | *modprobe mtdcore | ||
Line 21: | Line 32: | ||
*modprobe mtdchar | *modprobe mtdchar | ||
*modprobe mtdblock | *modprobe mtdblock | ||
+ | |||
+ | |||
+ | Finally, copy the jffs2 filesystem to ram, and mount it: | ||
*dd if=erootfs.jffs2 of=/dev/mtd0 | *dd if=erootfs.jffs2 of=/dev/mtd0 | ||
*mount -t jffs2 /dev/mtdblock0 temp | *mount -t jffs2 /dev/mtdblock0 temp | ||
− | |||
− | |||
− |
Revision as of 11:53, 5 April 2010
Download http://download.leapfrog.com/leapfrogconnect/PC/didj/DidjPlugin.exe
- Get the v1.2 tarbal from http://www.cabextract.org.uk/
- extract it
- run ./configure
- run make
- copy the bin somewhere convienent like /usr/local/bin
- cabextract -d test DidjPlugin.exe will put all the extracted files in the test directory.
The .lfs files are really .zip files inside
Mount the rootfs.jffs2 somewhere convinent and do a ls -lR >files this will give you a list of what's inside.
Hack away!!
BTW here is how to mount the rootfs.jffs2 image onto the temp directory:
First load a few required modules.
For newer kernels (2.6.28+)
- modprobe mtdram
- modprobe jff2
- modprobe mtdchar
- modprobe mtdblock
For older kernels
- modprobe mtdcore
- modprobe jffs2
- modprobe mtdbig
- modprobe mtdchar
- modprobe mtdblock
Finally, copy the jffs2 filesystem to ram, and mount it:
- dd if=erootfs.jffs2 of=/dev/mtd0
- mount -t jffs2 /dev/mtdblock0 temp