Difference between revisions of "EBC Exercise 01 Start Here"

From eLinux.org
Jump to: navigation, search
m (Updating for Fall 2018)
m (Updating for Fall 2018)
Line 44: Line 44:
 
There are three options as to how to run Linux.
 
There are three options as to how to run Linux.
 
# Native install ([http://www.ubuntu.com/download])
 
# Native install ([http://www.ubuntu.com/download])
# Install in a virtual machine. I've been running [[EBC Exercise 06 Notes on VirtualBox | Virtual Box]] recently and it works fine. I suggest using it.  You can also try [[EBC_Exercise_07_Installing_Ubuntu_in_VMware | VMware Player]] if you would like.
+
# Install in a virtual machine. I've been running [https://www.virtualbox.org Virtual Box] recently and it works fine. I suggest using it.
 
# Run in the cloud
 
# Run in the cloud
  

Revision as of 08:57, 17 August 2018

thumb‎ Embedded Linux Class by Mark A. Yoder


Overview

There are three major things that need to be done to have the BeagleBoard ready to run for class:

  1. Get your Beagle Hardware together
  2. Set up a host computer, running Linux for code development
  3. Clone the course git repository on both the host and the Beagle

The Hardware

Here's the hardware you will need and where you get it.

You may have, or will have to buy

We are using the BeagleBone Green Wireless this year. Since it's only $60 (or so) I'll have you buy your own. There are a few other things you will need to get before the first day of class.

  • BeagleBone Blue. See http://beagleboard.org/blue for suggestions of where to buy the Blue. I suggest ordering sooner rather than later since it may take a couple of weeks.
  • At least two 8G micro SD cards. I suggest you have 2 or 3 cards since it's easy to mess up one and it takes some 10 minutes to reload it.
  • micro SD card reader/writer

Books

What you buy from the Instrument Room

  • various input devices, sensors, displays, etc.

What you borrow from the Instrument Room

The Linux host computer

The above will get you ready for about the first couple of weeks of class. Around week 3 we'll start looking at the kernel and will need to cross compile. Once we start moving into Kernel development we will need a host computer. Since we are doing Linux development, it's generally agreed the host should be running Linux. I suggest you run Ubuntu 18.04 (LTS). You want the desktop-amd64.iso if you have a 64-bit machine.

There are three options as to how to run Linux.

  1. Native install ([1])
  2. Install in a virtual machine. I've been running Virtual Box recently and it works fine. I suggest using it.
  3. Run in the cloud

No matter which method you use be sure to have some 30G of disk space. The kernel tools will need at least 6G.

The Ubuntu site gives good instructions for a native install. I've had good success with running both VMware and Virtual Box, though my installation instructions are a bit dated. (Feel free to update them if they need it.)

I've been testing out the "Cloud" approach and it looks like it will work too. If you want to try the cloud, let me known and I'll show you how.


thumb‎ Embedded Linux Class by Mark A. Yoder