Difference between revisions of "EBC Exercise 01 Start Here"

From eLinux.org
Jump to: navigation, search
m (The Hardware: Different Beagle)
m (The Linux host computer: Added Guest Additions instructions)
 
(2 intermediate revisions by the same user not shown)
Line 43: Line 43:
  
 
There are options as to how to run Linux.
 
There are options as to how to run Linux.
# Install in a virtual machine. I've been running [https://www.virtualbox.org Virtual Box] recently and it works fine. I suggest using it.
+
# Install in a virtual machine. I've been running [https://www.virtualbox.org Virtual Box] recently and it works fine. I suggest using it.
 
# Native install ([http://www.ubuntu.com/download])
 
# Native install ([http://www.ubuntu.com/download])
  
 
I suggest you use the virtual machine.  I run Virtual Box on my laptop.
 
I suggest you use the virtual machine.  I run Virtual Box on my laptop.
 +
No matter which method you use be sure to have some 30G of disk space.  The kernel tools will need at least 6G.
  
No matter which method you use be sure to have some 30G of disk spaceThe kernel tools will need at least 6G.
+
If you do use Virtual Box, do this once you've set things up:
 +
* In the VM, go to Devices:Insert Guest Addition CD Image...
 +
* A box will appearClick '''RUN'''    Wait while it installs.
 +
* If it says '''This system is currently not set up to build kernel modules.''', run '''sudo apt update''' and '''sudo apt install gcc make perl'''
 +
* Reboot the VM.
 +
* In the VM, go to Devices:USB and select the Beagle.
 +
You are ready to go.
  
 
{{YoderHead}}
 
{{YoderHead}}

Latest revision as of 13:48, 17 August 2020

thumb‎ Embedded Linux Class by Mark A. Yoder


Overview

There are three major things that need to be done to have the BeagleBoard ready to run for class:

  1. Get your Beagle Hardware together
  2. Set up a host computer, running Linux for code development
  3. Clone the course git repository on both the host and the Beagle

The Hardware

Here's the hardware you will need and where you get it.

You may have, or will have to buy

We are using the BeagleBone Black this year. Since it's only $65 (or so) I'll have you buy your own. There are a few other things you will need to get before the first day of class.

  • BeagleBone Black. See http://beagleboard.org/black for suggestions of where to buy the Black. I suggest ordering sooner rather than later since it may take a couple of weeks. Note: If you already have a different Beagle and want to use it, contact me.
  • At least two 8G micro SD cards. I suggest you have 2 or 3 cards since it's easy to mess up one and it takes some 10 minutes to reload it.
  • micro SD card reader/writer

Books

What you buy from the Instrument Room

  • various input devices, sensors, displays, etc.

What you borrow from the Instrument Room

The Linux host computer

Since we are doing Linux development, it's generally agreed the host compute should be running Linux. I suggest you run Ubuntu 20.04 (LTS). You want the desktop-amd64.iso if you have a 64-bit machine.

There are options as to how to run Linux.

  1. Install in a virtual machine. I've been running Virtual Box recently and it works fine. I suggest using it.
  2. Native install ([1])

I suggest you use the virtual machine. I run Virtual Box on my laptop. No matter which method you use be sure to have some 30G of disk space. The kernel tools will need at least 6G.

If you do use Virtual Box, do this once you've set things up:

  • In the VM, go to Devices:Insert Guest Addition CD Image...
  • A box will appear. Click RUN Wait while it installs.
  • If it says This system is currently not set up to build kernel modules., run sudo apt update and sudo apt install gcc make perl
  • Reboot the VM.
  • In the VM, go to Devices:USB and select the Beagle.

You are ready to go.

thumb‎ Embedded Linux Class by Mark A. Yoder