Difference between revisions of "EBC Exercise 07 Connecting to Rose VPN"

From eLinux.org
Jump to: navigation, search
m
(No difference)

Revision as of 14:17, 9 September 2020

thumb‎ Embedded Linux Class by Mark A. Yoder


Here are instructions for connecting to Rose-Hulman's VPN via Global Connect. (Rose Global Connect Instructions)

On the bone, get the installation file and untar it.

bone$ cd /tmp
bone$ VERS=PanGPLinux-5.1.1-c17.tgz
bone$ wget -O $VERS https://roseshare.rose-hulman.edu/storage/u.svc/download.dn/fid/5504766564276453800_3845984564090334472
bone$ tar -xvf $VERS

Install.

bone$ sudo apt install ./GlobalProtect_deb_arm-5.1.1.0-17.deb

Run the VPN. Substitute your Rose username for username.

bone$ globalprotect
>> connect -p gp.rose-hulman.edu -u username@rose-hulman.edu
Retrieving configuration...                                            
gp.rose-hulman.edu - Enter login credentials                           

(e.g. username@rose-hulman.edu)
username(yoder@rose-hulman.edu):
Password:
Discovering network...                                                 
Connecting...                                                          
Connected                                                              
>> quit

You are now connected. Find you Rose ip address.

bone$ ip a show gpd0
3: gpd0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1400 qdisc pfifo_fast state UNKNOWN group default qlen 500
    link/none 
    inet 137.112.193.177/32 scope global gpd0
       valid_lft forever preferred_lft forever

Disconnect when done.

bone$ globalprotect
>> disconnect
>> quit




thumb‎ Embedded Linux Class by Mark A. Yoder