Difference between revisions of "EBC Exercise 11c getting more gpio"

From eLinux.org
Jump to: navigation, search
(Initial info)
 
m (Seeing if a pin is taken)
 
Line 13: Line 13:
 
You can check each pin with config-pin
 
You can check each pin with config-pin
 
  bone$ '''config-pin -q P9_25
 
  bone$ '''config-pin -q P9_25
  ERROR: open() for /sys/devices/platform/ocp/ocp:PP9_25_pinmux/state failed, No such file or directory
+
  ERROR: open() for /sys/devices/platform/ocp/ocp:P9_25_pinmux/state failed, No such file or directory
 
So, '''P9_25''' is taken for something.
 
So, '''P9_25''' is taken for something.
  

Latest revision as of 14:10, 16 September 2020

thumb‎ Embedded Linux Class by Mark A. Yoder


Many of the gpio pins are preallocated to things like the HDML interface, eMMc, etc. This shows you how to recover those pins.

Seeing if a pin is taken

When you look at the rightmost column of the P8 and P9 header tables you see notes about how the pins can be allocated.

P8allocation.png

You can check each pin with config-pin

bone$ config-pin -q P9_25
ERROR: open() for /sys/devices/platform/ocp/ocp:P9_25_pinmux/state failed, No such file or directory

So, P9_25 is taken for something.

Reclaiming the gpio pins

These can be unallocated by editing /boot/uEnv.txt

bone$ sudo vi /boot/uEnv.txt

Down a ways you'll see:

Line
 29 ###Disable auto loading of virtual capes (emmc/video/wireless/adc)
 30 #disable_uboot_overlay_emmc=1
 31 disable_uboot_overlay_video=1
 32 #disable_uboot_overlay_audio=1
 33 #disable_uboot_overlay_wireless=1
 34 #disable_uboot_overlay_adc=1

Uncomment the line(s) you want to free up. Here I've uncommented line 31 which will free up the hdmi video and audio pins.

Restart

bone$ sudo reboot

and check again.

beon$ config-pin -q P9_25
Current mode for P9_25 is:     gpio

Success!




thumb‎ Embedded Linux Class by Mark A. Yoder