Difference between revisions of "EVM Overclocking"

From eLinux.org
Jump to: navigation, search
m (Fix spelling of category)
 
(5 intermediate revisions by 2 users not shown)
Line 1: Line 1:
Overclock in UBOOT. to follow...
+
'''Overclock in UBOOT. Be careful, this is only 'theoretical'. Check the datasheets for suitable values. You can also underclock to save power.'''
  
Overlocking ARM:
+
''Overlocking ARM:''
  
 +
In UBOOT find the /boards/davinci.c file. In there there is a routine called misi_init_r.
  
Overclocking DSP:
+
There you can add code to change the value pf the PLL1_PLLM register.
  
 +
''Overclocking DDR:''
  
Overclocking DDR:
+
Same as above, however you can set the values for PLL2_PLLM and PLL2_DIV2.
 +
 
 +
''Overclocking DSP:''
 +
 
 +
<to follow>
 +
 
 +
[[Category:DaVinci]]

Latest revision as of 13:33, 27 October 2011

Overclock in UBOOT. Be careful, this is only 'theoretical'. Check the datasheets for suitable values. You can also underclock to save power.

Overlocking ARM:

In UBOOT find the /boards/davinci.c file. In there there is a routine called misi_init_r.

There you can add code to change the value pf the PLL1_PLLM register.

Overclocking DDR:

Same as above, however you can set the values for PLL2_PLLM and PLL2_DIV2.

Overclocking DSP:

<to follow>