Difference between revisions of "File:EGHS-LEDTransTest.jpg"
(LED Transistor Test circuit Vcc = 5V (main supply voltage - red wires) and Vgpio = 3.3V (representing the GPIO output - bottom blue wire) is connected to the transistor base through R2 (560ohm) resistor.) |
|||
| Line 1: | Line 1: | ||
LED Transistor Test circuit | LED Transistor Test circuit | ||
Vcc = 5V (main supply voltage - red wires) and Vgpio = 3.3V (representing the GPIO output - bottom blue wire) is connected to the transistor base through R2 (560ohm) resistor. | Vcc = 5V (main supply voltage - red wires) and Vgpio = 3.3V (representing the GPIO output - bottom blue wire) is connected to the transistor base through R2 (560ohm) resistor. | ||
| + | |||
| + | [[Category:RaspberryPi]] | ||
Latest revision as of 20:04, 19 October 2012
LED Transistor Test circuit Vcc = 5V (main supply voltage - red wires) and Vgpio = 3.3V (representing the GPIO output - bottom blue wire) is connected to the transistor base through R2 (560ohm) resistor.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 04:32, 22 February 2012 |  | 484 × 648 (57 KB) | Meltwater (talk | contribs) | LED Transistor Test circuit Vcc = 5V (main supply voltage - red wires) and Vgpio = 3.3V (representing the GPIO output - bottom blue wire) is connected to the transistor base through R2 (560ohm) resistor. |
- You cannot overwrite this file.
File usage
The following page links to this file:
