File:EGHS-LEDTransTest.jpg

From eLinux.org
Revision as of 04:32, 22 February 2012 by Meltwater (talk | contribs) (LED Transistor Test circuit Vcc = 5V (main supply voltage - red wires) and Vgpio = 3.3V (representing the GPIO output - bottom blue wire) is connected to the transistor base through R2 (560ohm) resistor.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Original file(484 × 648 pixels, file size: 57 KB, MIME type: image/jpeg)

LED Transistor Test circuit Vcc = 5V (main supply voltage - red wires) and Vgpio = 3.3V (representing the GPIO output - bottom blue wire) is connected to the transistor base through R2 (560ohm) resistor.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current04:32, 22 February 2012Thumbnail for version as of 04:32, 22 February 2012484 × 648 (57 KB)Meltwater (talk | contribs)LED Transistor Test circuit Vcc = 5V (main supply voltage - red wires) and Vgpio = 3.3V (representing the GPIO output - bottom blue wire) is connected to the transistor base through R2 (560ohm) resistor.
  • You cannot overwrite this file.

The following page links to this file: