File:Jump-pins-5-6.jpg

From eLinux.org
Revision as of 10:55, 28 December 2012 by Bgirardot (talk | contribs) (20 AWG wire used to connect P1 pins 5 and 6 to book RPi into safe mode. Also, 20 AWG wire insulation used to protect the power pins on the P1 header from accidentally being shorted to another pin or each other.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Original file(1,354 × 881 pixels, file size: 141 KB, MIME type: image/jpeg)

20 AWG wire used to connect P1 pins 5 and 6 to book RPi into safe mode. Also, 20 AWG wire insulation used to protect the power pins on the P1 header from accidentally being shorted to another pin or each other.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current10:55, 28 December 2012Thumbnail for version as of 10:55, 28 December 20121,354 × 881 (141 KB)Bgirardot (talk | contribs)20 AWG wire used to connect P1 pins 5 and 6 to book RPi into safe mode. Also, 20 AWG wire insulation used to protect the power pins on the P1 header from accidentally being shorted to another pin or each other.
  • You cannot overwrite this file.

The following page links to this file: