Difference between revisions of "File:SampleHookup.jpg"

From eLinux.org
Jump to: navigation, search
(Color Scheme as follows: Jumper Wires on Board: Green - I2C Clock Yellow - I2C Data Orange - 3.3V Red - 5V (runs through perf-board bus) Black - GND (common) Cat5 coming out of rPi: Orange - 3.3V Orange Stripe - GND Green - I2C SCL Green Stripe - I2C SD)
 
Line 2: Line 2:
  
 
Jumper Wires on Board:
 
Jumper Wires on Board:
 +
 
Green - I2C Clock
 
Green - I2C Clock
 +
 
Yellow - I2C Data
 
Yellow - I2C Data
 +
 
Orange - 3.3V
 
Orange - 3.3V
 +
 
Red - 5V (runs through perf-board bus)
 
Red - 5V (runs through perf-board bus)
 +
 
Black - GND (common)
 
Black - GND (common)
  
 
Cat5 coming out of rPi:
 
Cat5 coming out of rPi:
 +
 
Orange - 3.3V
 
Orange - 3.3V
 +
 
Orange Stripe - GND
 
Orange Stripe - GND
 +
 
Green - I2C SCL
 
Green - I2C SCL
 +
 
Green Stripe - I2C SDA
 
Green Stripe - I2C SDA
  

Revision as of 13:32, 1 September 2012

Color Scheme as follows:

Jumper Wires on Board:

Green - I2C Clock

Yellow - I2C Data

Orange - 3.3V

Red - 5V (runs through perf-board bus)

Black - GND (common)

Cat5 coming out of rPi:

Orange - 3.3V

Orange Stripe - GND

Green - I2C SCL

Green Stripe - I2C SDA

(Not connected: Brown - GPIO 14 (TxD) Brown Stripe - GPIO 16 (RxD) Blue - GPIO 4 Blue Stripe - 5V)

Pull-up resistors are all 10k

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current13:31, 1 September 2012Thumbnail for version as of 13:31, 1 September 20123,264 × 2,448 (3.73 MB)Batmarley (talk | contribs)Color Scheme as follows: Jumper Wires on Board: Green - I2C Clock Yellow - I2C Data Orange - 3.3V Red - 5V (runs through perf-board bus) Black - GND (common) Cat5 coming out of rPi: Orange - 3.3V Orange Stripe - GND Green - I2C SCL Green Stripe - I2C SD
  • You cannot overwrite this file.

The following page links to this file:

Metadata