Flameman/blackfin-avr-jtag

From eLinux.org
< Flameman
Revision as of 02:34, 3 April 2012 by Flameman (talk | contribs) (Created page with "= gnICE = == the idea == Every FT2232 universal serial module has an EEPROM on board that is programmed with a default set of parameters including the * VID:0x0403 * PID:0x60...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

gnICE

the idea

Every FT2232 universal serial module has an EEPROM on board that is programmed with a default set of parameters including the

  • VID:0x0403
  • PID:0x6010.

The EEPROM can be changed onboard using the FTDI Windows utility FT_Prog or any other Linux stuff. If you change the VID & PID to match gnice then every software looking for gnICE can detect the module.

urjtag is handling is at urjtag/src/tap/cable/ft2232.c & ft2232_list.h This is where the gnice and gnice+ are defined.


from windows

[1]

from linux

http://www.intra2net.com/en/developer/libftdi/download.php