Flameman/dht-walnut

From eLinux.org
< Flameman
Revision as of 02:41, 17 May 2021 by Legacy (talk | contribs)
Jump to: navigation, search

Attached is the photo of what we got from "Stelios-k" on eBay, you can judge for yourself.

Parcel-walnuts.jpg (To skimps out on properly packing was not a good idea, ain't it?)

  • board#0 board#1
  • board#2 board#3

Status of each board in the picture

board#0

  • defect: broken DIMM connector with two pins bent, scratches on the PCB
  • status: faulty
  • repairable: dunno, probably no

board#1

  • defect: no defects
  • status: working

board#2

  • defect: scratches on the PCB, RJ45 crushed
  • status: faulty
  • repairable: yes -> it's back to working condition

board#3

  • defect: broken DIMM connector with one pin bent, scratches on the PCB
  • status: faulty
  • repairable: dunno, probably no

Update:: We spent a lot of time to repair the board#2. It looked apparently fine, but the networking was not properly working, it randomly manifested weird and unexplained disconnections, inspecting the PCB we found the plastic of the RJ45 connector and the PHY are both cracked so the cable didn't make good and reliable contact and they PHY always fails its 100Mbps autonegotiation.

After some struggling, now this board is back in working condition! All test passed!


We are a group of five students working on a funny project. We are still need to find more boards so each person in our small group can develop alone. we currently have three working boards, so we are looking for two/three other boards, if you have one for sale and don't need it, please contact us!

downthebunker dot team at gmail dot com

You will receive our eternal gratitude!