Difference between revisions of "Flameman/fingerboard"

From eLinux.org
Jump to: navigation, search
(intro)
(Adapt11C24DX)
Line 31: Line 31:
 
== Adapt11C24DX ==
 
== Adapt11C24DX ==
  
Features:
+
=== Features ===
    * Compact "DX" form factor (2.8" x 2.1")
+
* Compact "DX" form factor (2.8" x 2.1")
    * Works with any 68HC11 E series microcontroller
+
* Works with any 68HC11 E series microcontroller
    * 9.8304 MHz crystal
+
* 9.8304 MHz crystal
    * 32K EEPROM
+
* 32K EEPROM
    * 512 bytes internal RAM (on MCUs)
+
* 512 bytes internal RAM (on MCUs)
    * Hardware Write Protect switch for EEPROM
+
* Hardware Write Protect switch for EEPROM
    * Design incorporates 68HC24 port replacement unit (PRU) for full 68HC11 port compatibility
+
* Design incorporates 68HC24 port replacement unit (PRU) for full 68HC11 port compatibility
    * 26 general purpose I/O lines (including 3 input captures and 5 output compares)
+
* 26 general purpose I/O lines (including 3 input captures and 5 output compares)
    * Pulse accumulator, hardware timer, real-time interrupt, watchdog, 2 hardware interrupts
+
* Pulse accumulator, hardware timer, real-time interrupt, watchdog, 2 hardware interrupts
    * 8 channel 8-bit analog-to-digital converter
+
* 8 channel 8-bit analog-to-digital converter
    * Serial peripheral interface (SPI) port offers virtually unlimited expansion
+
* Serial peripheral interface (SPI) port offers virtually unlimited expansion
    * Serial Communications Interface (SCI) port, with programmable baud rate up to 38,400
+
* Serial Communications Interface (SCI) port, with programmable baud rate up to 38,400
    * RS-232 serial port, utilizing on-chip SCI (4-pin connector)
+
* RS-232 serial port, utilizing on-chip SCI (4-pin connector)
    * SCI compatible with MIDI and RS485/RS422
+
* SCI compatible with MIDI and RS485/RS422
    * On-board reset circuit and button, 5V regulator, and RS232 interface
+
* On-board reset circuit and button, 5V regulator, and RS232 interface
    * Low power requirements (45 mA nominal; much less in STOP mode)
+
* Low power requirements (45 mA nominal; much less in STOP mode)
    * All port pins are brought out to standard 50-pin connector pattern
+
* All port pins are brought out to standard 50-pin connector pattern
    * Virtual plug-in interchangeability with all Adapt11 family boards
+
* Virtual plug-in interchangeability with all Adapt11 family boards
    * 11 connector options for the ultimate in modular design capabilities
+
* 11 connector options for the ultimate in modular design capabilities
    * Use programming language of your choice: C, BASIC, assembler, etc.
+
* Use programming language of your choice: C, BASIC, assembler, etc.
    * Compatible with JBug11 and PCBug11 debug/monitor programs
+
* Compatible with JBug11 and PCBug11 debug/monitor programs
    * Easy program-loading via MicroLoad, JBug11, PCBug11, ICC11, etc.
+
* Easy program-loading via MicroLoad, JBug11, PCBug11, ICC11, etc.
    * Compatible with BASIC11 Compiler/Simulator/Debugger/Terminal IDE for Windows
+
* Compatible with BASIC11 Compiler/Simulator/Debugger/Terminal IDE for Windows
    * Low cost-- ideal for educational and embedded applications
+
* Low cost-- ideal for educational and embedded applications
    * Many accessories available
+
* Many accessories available
 +
 
 +
=== memory map ===
 +
 
 +
<pre>
 +
0000-01ff internal ram
 +
0200-0fff 3.5K external ram
 +
1000-103f internal register block
 +
103f-1fff reserved
 +
2000-7fff 24k external ram
 +
8000-ffff 32k eeprom
 +
e000-ffff 8keeprom
 +
</pre>

Revision as of 09:21, 30 March 2009

EARLY PROOF VERSION

68hc11

intro

Fingerboard-board.jpg

http://www.embeddedtronics.com/computers.html


  • BSP
  • app
  • 68hc11 cross compiler build
  • buffalo
  • etc


Introduction to the 68HC11

http://www.owlnet.rice.edu/~elec201/Book/6811_asm.html

interesting links

http://tcrobots.org/members/akili.htm


Adapt11C24DX

Features

  • Compact "DX" form factor (2.8" x 2.1")
  • Works with any 68HC11 E series microcontroller
  • 9.8304 MHz crystal
  • 32K EEPROM
  • 512 bytes internal RAM (on MCUs)
  • Hardware Write Protect switch for EEPROM
  • Design incorporates 68HC24 port replacement unit (PRU) for full 68HC11 port compatibility
  • 26 general purpose I/O lines (including 3 input captures and 5 output compares)
  • Pulse accumulator, hardware timer, real-time interrupt, watchdog, 2 hardware interrupts
  • 8 channel 8-bit analog-to-digital converter
  • Serial peripheral interface (SPI) port offers virtually unlimited expansion
  • Serial Communications Interface (SCI) port, with programmable baud rate up to 38,400
  • RS-232 serial port, utilizing on-chip SCI (4-pin connector)
  • SCI compatible with MIDI and RS485/RS422
  • On-board reset circuit and button, 5V regulator, and RS232 interface
  • Low power requirements (45 mA nominal; much less in STOP mode)
  • All port pins are brought out to standard 50-pin connector pattern
  • Virtual plug-in interchangeability with all Adapt11 family boards
  • 11 connector options for the ultimate in modular design capabilities
  • Use programming language of your choice: C, BASIC, assembler, etc.
  • Compatible with JBug11 and PCBug11 debug/monitor programs
  • Easy program-loading via MicroLoad, JBug11, PCBug11, ICC11, etc.
  • Compatible with BASIC11 Compiler/Simulator/Debugger/Terminal IDE for Windows
  • Low cost-- ideal for educational and embedded applications
  • Many accessories available

memory map

0000-01ff internal ram
0200-0fff 3.5K external ram
1000-103f internal register block
103f-1fff reserved
2000-7fff 24k external ram
8000-ffff 32k eeprom
e000-ffff 8keeprom