Difference between revisions of "Flameman/fingerboard"
< Flameman
(→interesting links) |
|||
| Line 23: | Line 23: | ||
http://tcrobots.org/members/akili.htm | http://tcrobots.org/members/akili.htm | ||
| + | |||
| + | |||
| + | == Adapt11C24DX == | ||
| + | |||
| + | Features: | ||
| + | * Compact "DX" form factor (2.8" x 2.1") | ||
| + | * Works with any 68HC11 E series microcontroller | ||
| + | * 9.8304 MHz crystal | ||
| + | * 32K EEPROM | ||
| + | * 512 bytes internal RAM (on MCUs) | ||
| + | * Hardware Write Protect switch for EEPROM | ||
| + | * Design incorporates 68HC24 port replacement unit (PRU) for full 68HC11 port compatibility | ||
| + | * 26 general purpose I/O lines (including 3 input captures and 5 output compares) | ||
| + | * Pulse accumulator, hardware timer, real-time interrupt, watchdog, 2 hardware interrupts | ||
| + | * 8 channel 8-bit analog-to-digital converter | ||
| + | * Serial peripheral interface (SPI) port offers virtually unlimited expansion | ||
| + | * Serial Communications Interface (SCI) port, with programmable baud rate up to 38,400 | ||
| + | * RS-232 serial port, utilizing on-chip SCI (4-pin connector) | ||
| + | * SCI compatible with MIDI and RS485/RS422 | ||
| + | * On-board reset circuit and button, 5V regulator, and RS232 interface | ||
| + | * Low power requirements (45 mA nominal; much less in STOP mode) | ||
| + | * All port pins are brought out to standard 50-pin connector pattern | ||
| + | * Virtual plug-in interchangeability with all Adapt11 family boards | ||
| + | * 11 connector options for the ultimate in modular design capabilities | ||
| + | * Use programming language of your choice: C, BASIC, assembler, etc. | ||
| + | * Compatible with JBug11 and PCBug11 debug/monitor programs | ||
| + | * Easy program-loading via MicroLoad, JBug11, PCBug11, ICC11, etc. | ||
| + | * Compatible with BASIC11 Compiler/Simulator/Debugger/Terminal IDE for Windows | ||
| + | * Low cost-- ideal for educational and embedded applications | ||
| + | * Many accessories available | ||
Revision as of 07:54, 30 March 2009
EARLY PROOF VERSION
68hc11
intro
http://www.embeddedtronics.com/computers.html
- BSP
- app
- 68hc11 cross compiler build
- buffalo
- etc
interesting links
http://tcrobots.org/members/akili.htm
Adapt11C24DX
Features:
* Compact "DX" form factor (2.8" x 2.1") * Works with any 68HC11 E series microcontroller * 9.8304 MHz crystal * 32K EEPROM * 512 bytes internal RAM (on MCUs) * Hardware Write Protect switch for EEPROM * Design incorporates 68HC24 port replacement unit (PRU) for full 68HC11 port compatibility * 26 general purpose I/O lines (including 3 input captures and 5 output compares) * Pulse accumulator, hardware timer, real-time interrupt, watchdog, 2 hardware interrupts * 8 channel 8-bit analog-to-digital converter * Serial peripheral interface (SPI) port offers virtually unlimited expansion * Serial Communications Interface (SCI) port, with programmable baud rate up to 38,400 * RS-232 serial port, utilizing on-chip SCI (4-pin connector) * SCI compatible with MIDI and RS485/RS422 * On-board reset circuit and button, 5V regulator, and RS232 interface * Low power requirements (45 mA nominal; much less in STOP mode) * All port pins are brought out to standard 50-pin connector pattern * Virtual plug-in interchangeability with all Adapt11 family boards * 11 connector options for the ultimate in modular design capabilities * Use programming language of your choice: C, BASIC, assembler, etc. * Compatible with JBug11 and PCBug11 debug/monitor programs * Easy program-loading via MicroLoad, JBug11, PCBug11, ICC11, etc. * Compatible with BASIC11 Compiler/Simulator/Debugger/Terminal IDE for Windows * Low cost-- ideal for educational and embedded applications * Many accessories available
