Difference between revisions of "Flameman/ipaq/kernel"
Line 1: | Line 1: | ||
− | kernel | + | = info = |
+ | |||
+ | |||
+ | = reports = | ||
+ | |||
+ | {| border="1" cellspacing="0" cellpadding="5" align="center" | ||
+ | ! kernel | ||
+ | ! (cross)compiled | ||
+ | ! hacked ? | ||
+ | ! compiling ? | ||
+ | ! sleeve 2xpcmcia | ||
+ | ! sleeve 1xpcmcia | ||
+ | ! sleeve microdrive | ||
+ | |- | ||
+ | | 2.6.12 | ||
+ | | gcc-4.1.0/host=ppc | ||
+ | | no, vanilla, defconfig | ||
+ | | no | ||
+ | | not tested, yet | ||
+ | | not tested, yet | ||
+ | | not tested, yet | ||
+ | |- | ||
+ | | 2.6.13 | ||
+ | | gcc-4.1.0/host=ppc | ||
+ | | no, vanilla, defconfig | ||
+ | | no | ||
+ | | not tested, yet | ||
+ | | not tested, yet | ||
+ | | not tested, yet | ||
+ | |- | ||
+ | | 2.6.14 | ||
+ | | gcc-4.1.0/host=ppc | ||
+ | | no, vanilla, defconfig | ||
+ | | no | ||
+ | | not tested, yet | ||
+ | | not tested, yet | ||
+ | | not tested, yet | ||
+ | |- | ||
+ | | 2.6.15 | ||
+ | | gcc-4.1.0/host=ppc | ||
+ | | no, vanilla, myconfig | ||
+ | | yes | ||
+ | | not tested, yet | ||
+ | | not recognized | ||
+ | | not recognized | ||
+ | |- | ||
+ | | 2.6.15 | ||
+ | | gcc-4.1.0/host=ppc | ||
+ | | no, vanilla, myconfig | ||
+ | | yes | ||
+ | | not tested, yet | ||
+ | | not recognized | ||
+ | | not recognized | ||
+ | |- | ||
+ | | '''2.6.19.hh4''' seems "the one" | ||
+ | | gcc-4.1.0/host=ppc | ||
+ | | __, myconfig | ||
+ | | __ , patched file[]={arch/arm/common/ipaq/micro_ts.c arch/arm/configs/h3600_defconfig, arch/arm/mach-sa1100/h3600_lcd.c arch/arm/mach-sa1100/ipaq.c drivers/soc/micro.c} | ||
+ | | not tested, yet | ||
+ | | not tested, yet | ||
+ | | not tested, yet | ||
+ | |- | ||
+ | | 2.6.21 | ||
+ | | gcc-4.1.0/host=ppc | ||
+ | | no, vanilla, myconfig | ||
+ | | yes | ||
+ | | not tested, yet | ||
+ | | recognized with an issue (conflict if ext3 is specified in /boot/params ... with ext2 it works) ... also no frame buffer support | ||
+ | | not recognized | ||
+ | |- | ||
+ | | 2.6.21-hh | ||
+ | | gcc-4.1.0/host=ppc | ||
+ | | yes, myconfig | ||
+ | | yes | ||
+ | | not recognized | ||
+ | | stalled after kernel uncompress with a particular setting in the .config, CF recognized with an issue (conflict if ext3 is specified in /boot/params ... with ext2 it works) ... also frame buffer is working | ||
+ | | not recognized | ||
+ | |- | ||
+ | | 2.6.28 | ||
+ | | gcc-4.1.0/host=ppc | ||
+ | | no, vanilla, myconfig | ||
+ | | yes | ||
+ | | not recognized | ||
+ | | recognized with an issue (conflict if ext3 is specified in /boot/params ... with ext2 it works) ... also no frame buffer support | ||
+ | | not tested, yet | ||
+ | |- | ||
+ | | 2.6.29.colie | ||
+ | | gcc-4.1.0/host=ppc | ||
+ | | no, vanilla, myconfig | ||
+ | | yes | ||
+ | | not recognized | ||
+ | | recognized with an issue (conflict if ext3 is specified in /boot/params ... with ext2 it works)) frame buffer is working, backlighing is not working, RTC is working | ||
+ | | not tested, yet | ||
+ | |} | ||
+ | |||
+ | |||
+ | kernel 2.6.21.hh = http://handhelds.org/cgi-bin/cvsweb.cgi/linux/kernel26/ | ||
+ | |||
+ | |||
+ | = status = | ||
+ | |||
+ | status @ 15-02-2009: iPAQ sleeve dual pcmcia doesn't work | ||
+ | |||
+ | |||
+ | = support = | ||
+ | |||
+ | something about support http://blog.gremlin.it/?m=200611 |
Revision as of 17:23, 2 March 2009
info
reports
kernel | (cross)compiled | hacked ? | compiling ? | sleeve 2xpcmcia | sleeve 1xpcmcia | sleeve microdrive |
---|---|---|---|---|---|---|
2.6.12 | gcc-4.1.0/host=ppc | no, vanilla, defconfig | no | not tested, yet | not tested, yet | not tested, yet |
2.6.13 | gcc-4.1.0/host=ppc | no, vanilla, defconfig | no | not tested, yet | not tested, yet | not tested, yet |
2.6.14 | gcc-4.1.0/host=ppc | no, vanilla, defconfig | no | not tested, yet | not tested, yet | not tested, yet |
2.6.15 | gcc-4.1.0/host=ppc | no, vanilla, myconfig | yes | not tested, yet | not recognized | not recognized |
2.6.15 | gcc-4.1.0/host=ppc | no, vanilla, myconfig | yes | not tested, yet | not recognized | not recognized |
2.6.19.hh4 seems "the one" | gcc-4.1.0/host=ppc | __, myconfig | __ , patched file[]={arch/arm/common/ipaq/micro_ts.c arch/arm/configs/h3600_defconfig, arch/arm/mach-sa1100/h3600_lcd.c arch/arm/mach-sa1100/ipaq.c drivers/soc/micro.c} | not tested, yet | not tested, yet | not tested, yet |
2.6.21 | gcc-4.1.0/host=ppc | no, vanilla, myconfig | yes | not tested, yet | recognized with an issue (conflict if ext3 is specified in /boot/params ... with ext2 it works) ... also no frame buffer support | not recognized |
2.6.21-hh | gcc-4.1.0/host=ppc | yes, myconfig | yes | not recognized | stalled after kernel uncompress with a particular setting in the .config, CF recognized with an issue (conflict if ext3 is specified in /boot/params ... with ext2 it works) ... also frame buffer is working | not recognized |
2.6.28 | gcc-4.1.0/host=ppc | no, vanilla, myconfig | yes | not recognized | recognized with an issue (conflict if ext3 is specified in /boot/params ... with ext2 it works) ... also no frame buffer support | not tested, yet |
2.6.29.colie | gcc-4.1.0/host=ppc | no, vanilla, myconfig | yes | not recognized | recognized with an issue (conflict if ext3 is specified in /boot/params ... with ext2 it works)) frame buffer is working, backlighing is not working, RTC is working | not tested, yet |
kernel 2.6.21.hh = http://handhelds.org/cgi-bin/cvsweb.cgi/linux/kernel26/
status
status @ 15-02-2009: iPAQ sleeve dual pcmcia doesn't work
support
something about support http://blog.gremlin.it/?m=200611