Difference between revisions of "Flameman/routerstation-pro"
< Flameman
| Line 25: | Line 25: | ||
| − | == fw bootloader, redboot == | + | == fw bootloader == |
| + | |||
| + | === memory layout === | ||
| + | |||
| + | <pre> | ||
| + | Board: Ubiquiti RouterStation PRO | ||
| + | Arch: ar7100pro | ||
| + | RAM: 0x80000000-0x88000000, [0x8003bf00-0x87fe1000] available | ||
| + | Flash: 0xbf000000-0xc0000000, in 256 blocks of 0x00010000 bytes each | ||
| + | </pre> | ||
| + | |||
| + | |||
| + | === redboot == | ||
[[flameman/redboot]] | [[flameman/redboot]] | ||
Revision as of 03:15, 3 September 2011
For more interesting projects done by Flameman, be sure to check out his project index
this page is under development ...
Hardware Info Architecture: MIPS Vendor: Atheros Bootloader: RedBoot System-On-Chip: Atheros MIPS 24K CPU Speed: 680 Mhz Flash-Chip: Flash size: 16 MiB RAM: 64 MiB DDR Wireless: 3x 32-bit Mini-PCI slots (None included) Switch: Ethernet Phy switch, ADMTEK "Infineon" ADM6996FC Ethernet ports: 3x 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface with PoE on WAN USB: Yes v2.0 Serial: Yes JTAG: Yes
fw bootloader
memory layout
Board: Ubiquiti RouterStation PRO Arch: ar7100pro RAM: 0x80000000-0x88000000, [0x8003bf00-0x87fe1000] available Flash: 0xbf000000-0xc0000000, in 256 blocks of 0x00010000 bytes each
= redboot
load -r -b 0x80040000 -h 192.168.1.14 gentoo-ubiquiti
