Difference between revisions of "Flameman/routerstation-pro"

From eLinux.org
Jump to: navigation, search
(fw bootloader)
Line 26: Line 26:
  
  
== fw bootloader ==
+
== Boot Process ==
 +
 
 +
The RouterStation uses RedBoot as its boot loader. In the default configuration (shipping as of December 2008), a basic Linux kernel and BusyBox userspace is loaded from flash. The RedBoot boot sequence can be interrupted and a kernel loaded via TFTP instead.
 +
 
 +
RedBoot uses the WAN port for its network interface.
 +
 
 +
Once the system is booted, login with username/password ubnt to access the shell.
  
 
=== memory layout ===
 
=== memory layout ===

Revision as of 03:14, 3 September 2011

For more interesting projects done by Flameman, be sure to check out his project index


this page is under development ...

main

Hardware
Info
Architecture: MIPS
Vendor: Atheros
Bootloader: RedBoot
System-On-Chip: Atheros MIPS 24K
CPU Speed: 680 Mhz
Flash-Chip:
Flash size: 16 MiB
RAM: 64 MiB DDR
Wireless: 3x 32-bit Mini-PCI slots (None included)
Switch: Ethernet Phy switch, ADMTEK "Infineon" ADM6996FC
Ethernet ports: 3x 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface with PoE on WAN
USB: Yes v2.0
Serial: Yes
JTAG: Yes


Boot Process

The RouterStation uses RedBoot as its boot loader. In the default configuration (shipping as of December 2008), a basic Linux kernel and BusyBox userspace is loaded from flash. The RedBoot boot sequence can be interrupted and a kernel loaded via TFTP instead.

RedBoot uses the WAN port for its network interface.

Once the system is booted, login with username/password ubnt to access the shell.

memory layout

Board: Ubiquiti RouterStation PRO
 Arch: ar7100pro
  RAM: 0x80000000-0x88000000, [0x8003bf00-0x87fe1000] available
Flash: 0xbf000000-0xc0000000, in 256 blocks of 0x00010000 bytes each


redboot

flameman/redboot

load -r -b 0x80040000 -h 192.168.1.14 gentoo-ubiquiti