Difference between revisions of "Flameman/routerstation-pro"

From eLinux.org
Jump to: navigation, search
(linux kernel)
(other os)
Line 64: Line 64:
  
 
i am integrating 2.6.32.27 to mips-v2 ar71xx, a lot of patches to be committed
 
i am integrating 2.6.32.27 to mips-v2 ar71xx, a lot of patches to be committed
 +
 +
== doc ==
 +
 +
http://wiki.openwrt.org/toh/ubiquiti/routerstation.pro
 +
 +
http://www.ubnt.com/forum/
 +
  
 
== other os ==
 
== other os ==
 +
 +
=== openwrt (linux) ===
 +
 +
http://wiki.openwrt.org/doc/howto/build
 +
  
 
=== freebsd/mips ??? ===
 
=== freebsd/mips ??? ===
  
 
http://wiki.freebsd.org/FreeBSD/mips/UBNT-RouterStation
 
http://wiki.freebsd.org/FreeBSD/mips/UBNT-RouterStation

Revision as of 11:38, 3 September 2011

For more interesting projects done by Flameman, be sure to check out his project index


this page is under development ...

main

Hardware
Info
Architecture: MIPS
Vendor: Atheros
Bootloader: RedBoot
System-On-Chip: Atheros MIPS 24K
CPU Speed: 680 Mhz
Flash-Chip:
Flash size: 16 MiB
RAM: 64 MiB DDR
Wireless: 3x 32-bit Mini-PCI slots (None included)
Switch: Ethernet Phy switch, ADMTEK "Infineon" ADM6996FC
Ethernet ports: 3x 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface with PoE on WAN
USB: Yes v2.0
Serial: Yes
JTAG: Yes


Boot Process

The RouterStation uses RedBoot as its boot loader. In the default configuration (shipping as of December 2008), a basic Linux kernel and BusyBox userspace is loaded from flash. The RedBoot boot sequence can be interrupted and a kernel loaded via TFTP instead.

RedBoot uses the WAN port for its network interface.

Once the system is booted, login with username/password ubnt to access the shell.

memory layout

Board: Ubiquiti RouterStation PRO
 Arch: ar7100pro
  RAM: 0x80000000-0x88000000, [0x8003bf00-0x87fe1000] available
Flash: 0xbf000000-0xc0000000, in 256 blocks of 0x00010000 bytes each


redboot

flameman/redboot

load -r -b 0x80040000 -h 192.168.1.14 gentoo-ubiquiti


linux kernel

expected lzma compressed kernel ( -d means decompress )

RedBoot> cache off
RedBoot> fis load -d -e kernel
RedBoot> go

i am integrating 2.6.32.27 to mips-v2 ar71xx, a lot of patches to be committed

doc

http://wiki.openwrt.org/toh/ubiquiti/routerstation.pro

http://www.ubnt.com/forum/


other os

openwrt (linux)

http://wiki.openwrt.org/doc/howto/build


freebsd/mips ???

http://wiki.freebsd.org/FreeBSD/mips/UBNT-RouterStation