Flameman/sgi/octane-dmesg
For more interesting projects done by Flameman, be sure to check out his project index
Back to Flameman/sgi
dmesg
kernel
2.6.29
version 2.6.29.1-mipsgit-20090324-sgi-octane2-1xR12K compiled with gcc version 4.3.5 (Gentoo 4.3.5 p1.1) ) 1 SMP PREEMPT Tue Jul 23 05:12:44 CEST 2013 ARCH: SGI-IP30 PROMLIB: ARC firmware Version 64 Revision 0 CPU revision is: 00000e35 (R12000) FPU revision is: 00000900 Checking for the multiply/shift bug... no. Checking for the daddiu bug... no. Silicon Graphics Octane (IP30) support: (c) 2004-2007 Stanislaw Skowronek. Detected 1280 MB of physical memory. Updating PROM memory size. xtalk: Detected XBow (revision 2.0) at 0. xtalk: Detected Heart (revision F) at 8. xtalk: Detected HQ4 / ImpactSR (revision B) at 10. xtalk: Detected Buzz / Odyssey (revision B) at 11. xtalk: Detected Bridge (revision D) at 15. BRIDGE chip at xtalk:15, initializing... registering PCI controller with io_map_base unset Determined physical RAM map: memory: 0000000000004000 @ 0000000000000000 (reserved) memory: 0000000000d44000 @ 0000000020004000 (reserved) memory: 00000000001b8000 @ 0000000020d48000 (usable) memory: 0000000000100000 @ 0000000020f00000 (ROM data) memory: 000000003f000000 @ 0000000021000000 (usable) memory: 0000000010000000 @ 0000000060000000 (reserved) memory: 0000000010000000 @ 0000000060000000 (usable) Wasting 7530432 bytes for tracking 134472 unused pages Initrd not found or empty - disabling initrd Zone PFN ranges: DMA 0x00000000 -> 0x000a0000 Normal 0x000a0000 -> 0x000a0000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x00000004 0: 0x00020004 -> 0x00070000 On node 0 totalpages: 327680 free_area_init_node: node 0, pgdat a8000000204cb080, node_mem_map a800000021000000 DMA zone: 6272 pages used for memmap DMA zone: 0 pages reserved DMA zone: 321408 pages, LIFO batch:31 Detected 1 enabled CPU(s). Built 1 zonelists in Zone order, mobility grouping on. Total pages: 321408 Kernel command line: ip=on console=ttyS0,9600 rdinit=/sbin/init init=/bin/bash Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes. Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes Unified secondary cache 2048kB 2-way, linesize 128 bytes. IP30: interrupt controller initialized. PID hash table entries: 4096 (order: 12, 32768 bytes) IP30: initializing timer. 400 MHz CPU detected start_kernel(): bug: interrupts were enabled early Console: colour dummy device 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Memory: 1267076k/1296096k available (3708k kernel code, 28276k reserved, 1215k data, 8360k init, 0k highmem) Calibrating delay loop... 618.49 BogoMIPS (lpj=309248) Mount-cache hash table entries: 256 Checking for the daddi bug... no. Brought up 1 CPUs net_namespace: 560 bytes NET: Registered protocol family 16 bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pci 0000:00:00.0: reg 10 io port: [0x200000-0x2000ff] pci 0000:00:00.0: reg 14 32bit mmio: [0x200000-0x200fff] pci 0000:00:00.0: reg 30 32bit mmio: [0x210000-0x21ffff] pci 0000:00:01.0: reg 10 io port: [0x400000-0x4000ff] pci 0000:00:01.0: reg 14 32bit mmio: [0x400000-0x400fff] pci 0000:00:01.0: reg 30 32bit mmio: [0x410000-0x41ffff] pci 0000:00:02.0: reg 10 32bit mmio: [0x500000-0x5fffff] pci 0000:00:03.0: reg 10 32bit mmio: [0x600000-0x601fff] IP30: HEART ATTACK! Caught errors: 0x0040! interrupt #63 interrupt #57 Switched to high resolution mode on CPU 0 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 squashfs: version 4.0 (2009/01/31) Phillip Lougher EFS: 1.0a - http://aeschi.ch.eu.org/efs/ msgmni has been set to 2476 alg: No test for stdrng (krng) io scheduler noop registered io scheduler deadline registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled loop: module loaded qla1280: QLA1040 found on PCI bus 0, dev 0 BRIDGE: IO #0, size 0x100 for little-endian 0000:00:00.0 --> direct I/O at bus 0x01000000 vma 0x000000f101000000 BRIDGE: Memory #1, size 0x1000 for little-endian 0000:00:00.0 --> direct 32-bit at bus 0x01000000 vma 0x000000f041000000 BRIDGE: Memory #6, size 0x10000 for little-endian 0000:00:00.0 --> direct 32-bit at bus 0x01010000 vma 0x000000f041010000 PCI: Enabling device 0000:00:00.0 (0006 -> 0007) scsi(0:0): Resetting SCSI BUS scsi0 : QLogic QLA1040 PCI to SCSI Host Adapter Firmware version: 7.65.06, Driver version 3.26 qla1280: QLA1040 found on PCI bus 0, dev 1 BRIDGE: IO #0, size 0x100 for little-endian 0000:00:01.0 --> direct I/O at bus 0x01000100 vma 0x000000f101000100 BRIDGE: Memory #1, size 0x1000 for little-endian 0000:00:01.0 --> direct 32-bit at bus 0x01020000 vma 0x000000f041020000 BRIDGE: Memory #6, size 0x10000 for little-endian 0000:00:01.0 --> direct 32-bit at bus 0x01030000 vma 0x000000f041030000 PCI: Enabling device 0000:00:01.0 (0006 -> 0007) scsi(1:0): Resetting SCSI BUS scsi1 : QLogic QLA1040 PCI to SCSI Host Adapter Firmware version: 7.65.06, Driver version 3.26 st: Version 20081215, fixed bufsize 32768, s/g segs 256 Driver 'st' needs updating - please use bus_type methods Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods usbmon: debugfs is not available ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 uhci_hcd: USB Universal Host Controller Interface driver usbcore: registered new interface driver usbserial usbserial: USB Serial Driver core USB Serial support registered for pl2303 usbcore: registered new interface driver pl2303 pl2303: Prolific PL2303 USB to serial adaptor driver mice: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.18a. BRIDGE: Memory #0, size 0x2000 for little-endian 0000:00:03.0 --> direct 32-bit at bus 0x01040000 vma 0x000000f041040000 ALSA device list: #0: SGI RAD Audio at 0xf041040000 BRIDGE: Memory #0, size 0x100000 for little-endian 0000:00:02.0 --> direct 32-bit at bus 0x01100000 vma 0x000000f041100000 IOC3 part: [030-0891-003], serial: [MBX420] => class IP30 system BUG: scheduling while atomic: swapper/1/0x00000002 Modules linked in: Call Trace: [<a800000020010c90>] dump_stack+0x8/0x48 [<a8000000200119c0>] schedule+0x510/0x9f0 [<a800000020012268>] schedule_timeout+0x110/0x170 [<a8000000200113ec>] wait_for_common+0x164/0x190 [<a80000002005ebd4>] call_usermodehelper_exec+0x94/0xc8 [<a8000000201e2470>] kobject_uevent_env+0x4f8/0x530 [<a800000020243d4c>] device_add+0x5e4/0x740 [<a800000020243fd0>] device_create_vargs+0x100/0x118 [<a80000002024400c>] device_create+0x24/0x30 [<a800000020224758>] misc_register+0x160/0x268 [<a800000020236ecc>] ioc3led_probe+0x6c/0x1e0 [<a800000020318934>] ioc3_probe+0x5ac/0xdc0 [<a8000000201f9924>] local_pci_probe+0x1c/0x28 [<a8000000201f9c4c>] pci_device_probe+0x84/0xb0 [<a800000020246ba4>] driver_probe_device+0xdc/0x278 [<a800000020246de8>] __driver_attach+0xa8/0xb0 [<a8000000202460c0>] bus_for_each_dev+0x60/0xc8 [<a800000020245708>] bus_add_driver+0x2a0/0x388 [<a80000002024708c>] driver_register+0x84/0x190 [<a8000000201fa1b8>] __pci_register_driver+0x60/0xe0 [<a800000020014ac0>] __kprobes_text_end+0x48/0x1e8 [<a8000000204d346c>] kernel_init+0x298/0x348 [<a800000020017770>] kernel_thread_helper+0x10/0x18 BUG: scheduling while atomic: swapper/1/0x00000002 Modules linked in: Call Trace: [<a800000020010c90>] dump_stack+0x8/0x48 [<a8000000200119c0>] schedule+0x510/0x9f0 [<a800000020012268>] schedule_timeout+0x110/0x170 [<a8000000200113ec>] wait_for_common+0x164/0x190 [<a80000002005ebd4>] call_usermodehelper_exec+0x94/0xc8 [<a8000000201e2470>] kobject_uevent_env+0x4f8/0x530 [<a800000020243d4c>] device_add+0x5e4/0x740 [<a800000020243fd0>] device_create_vargs+0x100/0x118 [<a80000002024400c>] device_create+0x24/0x30 [<a800000020224758>] misc_register+0x160/0x268 [<a800000020237cac>] ioc3rtc_probe+0x74/0x260 [<a800000020318934>] ioc3_probe+0x5ac/0xdc0 [<a8000000201f9924>] local_pci_probe+0x1c/0x28 [<a8000000201f9c4c>] pci_device_probe+0x84/0xb0 [<a800000020246ba4>] driver_probe_device+0xdc/0x278 [<a800000020246de8>] __driver_attach+0xa8/0xb0 [<a8000000202460c0>] bus_for_each_dev+0x60/0xc8 [<a800000020245708>] bus_add_driver+0x2a0/0x388 [<a80000002024708c>] driver_register+0x84/0x190 [<a8000000201fa1b8>] __pci_register_driver+0x60/0xe0 [<a800000020014ac0>] __kprobes_text_end+0x48/0x1e8 [<a8000000204d346c>] kernel_init+0x298/0x348 [<a800000020017770>] kernel_thread_helper+0x10/0x18 BUG: scheduling while atomic: swapper/1/0x00000002 Modules linked in: Call Trace: [<a800000020010c90>] dump_stack+0x8/0x48 [<a8000000200119c0>] schedule+0x510/0x9f0 [<a800000020012268>] schedule_timeout+0x110/0x170 [<a8000000200113ec>] wait_for_common+0x164/0x190 [<a80000002005ebd4>] call_usermodehelper_exec+0x94/0xc8 [<a8000000201e2470>] kobject_uevent_env+0x4f8/0x530 [<a80000002024361c>] device_del+0x164/0x1c0 [<a80000002024368c>] device_unregister+0x14/0x28 [<a8000000202436ec>] device_destroy+0x4c/0x60 [<a80000002023849c>] uart_remove_one_port+0xbc/0x150 [<a800000020240344>] serial8250_register_port+0x12c/0x360 [<a800000020241f88>] ioc3uart_probe+0x178/0x1f8 [<a800000020318934>] ioc3_probe+0x5ac/0xdc0 [<a8000000201f9924>] local_pci_probe+0x1c/0x28 [<a8000000201f9c4c>] pci_device_probe+0x84/0xb0 [<a800000020246ba4>] driver_probe_device+0xdc/0x278 [<a800000020246de8>] __driver_attach+0xa8/0xb0 [<a8000000202460c0>] bus_for_each_dev+0x60/0xc8 [<a800000020245708>] bus_add_driver+0x2a0/0x388 [<a80000002024708c>] driver_register+0x84/0x190 [<a8000000201fa1b8>] __pci_register_driver+0x60/0xe0 [<a800000020014ac0>] __kprobes_text_end+0x48/0x1e8 [<a8000000204d346c>] kernel_init+0x298/0x348 [<a800000020017770>] kernel_thread_helper+0x10/0x18 0000:00:02.0: ttyS0 at IOC3 0xf041120178 (irq = 64) is a 16550A console [ttyS0] enabled BUG: scheduling while atomic: swapper/1/0x00000002 Modules linked in: Call Trace: [<a800000020010c90>] dump_stack+0x8/0x48 [<a8000000200119c0>] schedule+0x510/0x9f0 [<a800000020012268>] schedule_timeout+0x110/0x170 [<a8000000200113ec>] wait_for_common+0x164/0x190 [<a80000002005ebd4>] call_usermodehelper_exec+0x94/0xc8 [<a8000000201e2470>] kobject_uevent_env+0x4f8/0x530 [<a800000020243d4c>] device_add+0x5e4/0x740 [<a800000020243fd0>] device_create_vargs+0x100/0x118 [<a80000002024400c>] device_create+0x24/0x30 [<a800000020218304>] tty_register_device+0x114/0x170 [<a800000020238e34>] uart_add_one_port+0x1e4/0x4e0 [<a8000000202403e8>] serial8250_register_port+0x1d0/0x360 [<a800000020241f88>] ioc3uart_probe+0x178/0x1f8 [<a800000020318934>] ioc3_probe+0x5ac/0xdc0 [<a8000000201f9924>] local_pci_probe+0x1c/0x28 [<a8000000201f9c4c>] pci_device_probe+0x84/0xb0 [<a800000020246ba4>] driver_probe_device+0xdc/0x278 [<a800000020246de8>] __driver_attach+0xa8/0xb0 [<a8000000202460c0>] bus_for_each_dev+0x60/0xc8 [<a800000020245708>] bus_add_driver+0x2a0/0x388 [<a80000002024708c>] driver_register+0x84/0x190 [<a8000000201fa1b8>] __pci_register_driver+0x60/0xe0 [<a800000020014ac0>] __kprobes_text_end+0x48/0x1e8 [<a8000000204d346c>] kernel_init+0x298/0x348 [<a800000020017770>] kernel_thread_helper+0x10/0x18 BUG: scheduling while atomic: swapper/1/0x00000002 Modules linked in: Call Trace: [<a800000020010c90>] dump_stack+0x8/0x48 [<a8000000200119c0>] schedule+0x510/0x9f0 [<a800000020012268>] schedule_timeout+0x110/0x170 [<a8000000200113ec>] wait_for_common+0x164/0x190 [<a80000002005ebd4>] call_usermodehelper_exec+0x94/0xc8 [<a8000000201e2470>] kobject_uevent_env+0x4f8/0x530 [<a80000002024361c>] device_del+0x164/0x1c0 [<a80000002024368c>] device_unregister+0x14/0x28 [<a8000000202436ec>] device_destroy+0x4c/0x60 [<a80000002023849c>] uart_remove_one_port+0xbc/0x150 [<a800000020240344>] serial8250_register_port+0x12c/0x360 [<a800000020241fa8>] ioc3uart_probe+0x198/0x1f8 [<a800000020318934>] ioc3_probe+0x5ac/0xdc0 [<a8000000201f9924>] local_pci_probe+0x1c/0x28 [<a8000000201f9c4c>] pci_device_probe+0x84/0xb0 [<a800000020246ba4>] driver_probe_device+0xdc/0x278 [<a800000020246de8>] __driver_attach+0xa8/0xb0 [<a8000000202460c0>] bus_for_each_dev+0x60/0xc8 [<a800000020245708>] bus_add_driver+0x2a0/0x388 [<a80000002024708c>] driver_register+0x84/0x190 [<a8000000201fa1b8>] __pci_register_driver+0x60/0xe0 [<a800000020014ac0>] __kprobes_text_end+0x48/0x1e8 [<a8000000204d346c>] kernel_init+0x298/0x348 [<a800000020017770>] kernel_thread_helper+0x10/0x18 0000:00:02.0: ttyS1 at IOC3 0xf041120170 (irq = 64) is a 16550A BUG: scheduling while atomic: swapper/1/0x00000002 Modules linked in: Call Trace: [<a800000020010c90>] dump_stack+0x8/0x48 [<a8000000200119c0>] schedule+0x510/0x9f0 [<a800000020012268>] schedule_timeout+0x110/0x170 [<a8000000200113ec>] wait_for_common+0x164/0x190 [<a80000002005ebd4>] call_usermodehelper_exec+0x94/0xc8 [<a8000000201e2470>] kobject_uevent_env+0x4f8/0x530 [<a800000020243d4c>] device_add+0x5e4/0x740 [<a800000020243fd0>] device_create_vargs+0x100/0x118 [<a80000002024400c>] device_create+0x24/0x30 [<a800000020218304>] tty_register_device+0x114/0x170 [<a800000020238e34>] uart_add_one_port+0x1e4/0x4e0 [<a8000000202403e8>] serial8250_register_port+0x1d0/0x360 [<a800000020241fa8>] ioc3uart_probe+0x198/0x1f8 [<a800000020318934>] ioc3_probe+0x5ac/0xdc0 [<a8000000201f9924>] local_pci_probe+0x1c/0x28 [<a8000000201f9c4c>] pci_device_probe+0x84/0xb0 [<a800000020246ba4>] driver_probe_device+0xdc/0x278 [<a800000020246de8>] __driver_attach+0xa8/0xb0 [<a8000000202460c0>] bus_for_each_dev+0x60/0xc8 [<a800000020245708>] bus_add_driver+0x2a0/0x388 [<a80000002024708c>] driver_register+0x84/0x190 [<a8000000201fa1b8>] __pci_register_driver+0x60/0xe0 [<a800000020014ac0>] __kprobes_text_end+0x48/0x1e8 [<a8000000204d346c>] kernel_init+0x298/0x348 [<a800000020017770>] kernel_thread_helper+0x10/0x18 Ethernet address is 08:00:69:13:a8:d1. eth0 (SGI IOC3): not using net_device_ops yet BUG: scheduling while atomic: swapper/1/0x00000002 Modules linked in: Call Trace: [<a800000020010c90>] dump_stack+0x8/0x48 [<a8000000200119c0>] schedule+0x510/0x9f0 [<a800000020012268>] schedule_timeout+0x110/0x170 [<a8000000200113ec>] wait_for_common+0x164/0x190 [<a80000002005ebd4>] call_usermodehelper_exec+0x94/0xc8 [<a8000000201e2470>] kobject_uevent_env+0x4f8/0x530 [<a800000020243d4c>] device_add+0x5e4/0x740 [<a8000000203327a8>] register_netdevice+0x400/0x608 [<a8000000203329f4>] register_netdev+0x44/0x68 [<a80000002000ecb0>] ioc3eth_probe+0x358/0x518 [<a800000020318934>] ioc3_probe+0x5ac/0xdc0 [<a8000000201f9924>] local_pci_probe+0x1c/0x28 [<a8000000201f9c4c>] pci_device_probe+0x84/0xb0 [<a800000020246ba4>] driver_probe_device+0xdc/0x278 [<a800000020246de8>] __driver_attach+0xa8/0xb0 [<a8000000202460c0>] bus_for_each_dev+0x60/0xc8 [<a800000020245708>] bus_add_driver+0x2a0/0x388 [<a80000002024708c>] driver_register+0x84/0x190 [<a8000000201fa1b8>] __pci_register_driver+0x60/0xe0 [<a800000020014ac0>] __kprobes_text_end+0x48/0x1e8 [<a8000000204d346c>] kernel_init+0x298/0x348 [<a800000020017770>] kernel_thread_helper+0x10/0x18 eth0: link up, 100Mbps, full-duplex, lpa 0x05E1 eth0: Using PHY 1, vendor 0x15f42, model 2, rev 3. eth0: IOC3 SSRAM has 128 kbyte. IOC3 Master Driver loaded for 0000:00:02.0 atkbd.c: keyboard reset failed on ioc3/serio0kbd atkbd.c: keyboard reset failed on ioc3/serio0aux TCP cubic registered NET: Registered protocol family 17 Freeing prom memory: 1024k freed Freeing unused kernel memory: 8360k freed bash #
2.6.17.4
...