Difference between revisions of "Hammer Board HOWTOS"

From eLinux.org
Jump to: navigation, search
Line 1: Line 1:
 
This is the index for the How-To section
 
This is the index for the How-To section
  
[[How_to_Swtching_5V_Regulator|How to add a Switching 5V regulator]] to the [[Hammer_Carrier]]
+
[[Hammer_How_to_Swtching_5V_Regulator|How to add a Switching 5V regulator]] to the [[Hammer_Carrier]]
  
[[How_to_USB_Ethernet|How to add a USB Ethernet]] adapter to the [[Hammer_Board]]
+
[[Hammer_How_to_USB_Ethernet|How to add a USB Ethernet]] adapter to the [[Hammer_Board]]
  
[[How_to_Enc28j60|How to add an ENC28j60 SPI ethernet interface]] to the [[Hammer_Board]]
+
[[Hammer_How_to_Enc28j60|How to add an ENC28j60 SPI ethernet interface]] to the [[Hammer_Board]]
  
[[How_to_buildroot|How to build a rootfs]] and the kernel for the [[Hammer_Board]]
+
[[Hammer_How_to_buildroot|How to build a rootfs]] and the kernel for the [[Hammer_Board]]
  
[[How_to_Networking|TCPIP Networking,]] Getting the .config neccessary for TCPIP to work.
+
[[Hammer_How_to_Networking|TCPIP Networking,]] Getting the .config neccessary for TCPIP to work.
  
  
 
[[Category:TCT-Hammer]]
 
[[Category:TCT-Hammer]]
 
[[Category:TinCanTools]]
 
[[Category:TinCanTools]]

Revision as of 17:00, 12 September 2007

This is the index for the How-To section

How to add a Switching 5V regulator to the Hammer_Carrier

How to add a USB Ethernet adapter to the Hammer_Board

How to add an ENC28j60 SPI ethernet interface to the Hammer_Board

How to build a rootfs and the kernel for the Hammer_Board

TCPIP Networking, Getting the .config neccessary for TCPIP to work.