Hammer How to Enc28j60

From eLinux.org
Revision as of 09:13, 2 September 2007 by KenMcGuire (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

First you have to get an Enc28j60, the following links may be usefull:

Next we will be soldering it on to the Hammer_Carrier

We will use the 3.3V regulator of the Hammier Carrrier, but you already need to have done the How_to_Swtching_5V_Regulator

Also make sure that your 5V main power supply can supply the Hammer as well as the ENC28J60-H.

Insert picture of the result

Insert picture of the wires soldered to the SPI, VccAux & Gnd points

Software driver info:

The Good  Kernel SPI API
  The Bad  &
    The Ugly  The current "driver"