Difference between revisions of "Hammer How to buildroot"
Line 14: | Line 14: | ||
7) make zImage | 7) make zImage | ||
− | |||
− | |||
− | |||
− | |||
− | |||
8) in apex "xr 0x30008000" then send the zImage (arch/arm/boot/zImage) via xmodem | 8) in apex "xr 0x30008000" then send the zImage (arch/arm/boot/zImage) via xmodem |
Revision as of 23:00, 1 January 2008
1) buildroot needs hammer-config copied to .config
2) if you dont have makeinfo installed need to patch /buildroot/toolchain_build_arm/binutils-2.17.50.0.17/missing to comment out line 302 "test -f $file || exit 1"
3) kernel is compiled outside of buildroot
4) copy hammer-config to .config
5) edit Makefile to set the cross compiler path properly
6) make oldconfig
7) make zImage
8) in apex "xr 0x30008000" then send the zImage (arch/arm/boot/zImage) via xmodem
8a) ubuntu 6.06 LTS needs lrzsz installed for xmodem etc. to work in minicom.
9) in apex "boot"
10) cat /proc/version ==> Linux version 2.6.22 (kenm@kenm-desktop) (gcc version 4.1.2) #1 Sat Sep 1 12:50:36 MDT 2007
11) now that you have a working kernel, you may want to configure it for networking, see How_to_Networking