Difference between revisions of "INNOSTICK6-DEBIAN"

From eLinux.org
Jump to: navigation, search
m
m (enter English version)
Line 1: Line 1:
 
[[INNOSTICK6-DEBIAN/zh|中文页面]]<br>
 
[[INNOSTICK6-DEBIAN/zh|中文页面]]<br>
 
[[File:Debian-stretch-1024x576.jpg|600px]]<br>
 
[[File:Debian-stretch-1024x576.jpg|600px]]<br>
==远程桌面VNC登陆==
+
==VNC Remote Login==
Innostick 6上预装的Debian都提供了VNC Server支持。用户可以通过VNC Viewer和它建立连接,远程登陆到Debian桌面。
+
Debian distribution pre-loaded with Innostick 6 has support of VNC Server. User can login to it through an VNC Viewer.
===准备工作===
+
===Pre-requirements===
*一块预装Debian Stretch的Innostick 6主板
+
*An Innostick 6 single board computer, pre-loaded with Debian Stretch
*一台Windows主机
+
*A Windows Host machine
 
*UltraVnc Viewer v1.2.1.6 from www.uvnc.com : http://www.uvnc.com/downloads/ultravnc.html
 
*UltraVnc Viewer v1.2.1.6 from www.uvnc.com : http://www.uvnc.com/downloads/ultravnc.html
===操作步骤===
+
===Procedures===
1. 在Windows主机上安装UltraVnc Viewer<br/>
+
1. Install UltraVnc Viewer on Windows host<br/>
2. 安装J1跳针帽(Micro-USB供电)<br/>
+
2. Mount Jumper J1 on Innostick 6(Supply from Micro-USB cable)<br/>
3. J2跳针置空(“Normal Boot”模式)<br/>
+
3. Leave Jumper J2 open on Innostick 6(Normal Boot Mode)<br/>
4. 用Micro-USB电缆连接Windows主机和Innostick 6 P1口<br/>
+
4. Connect Micro-USB cable between Windows host and Innostick 6 P1<br/>
此时Innostick 6上电启动,LED1开始闪烁。<br>
+
5. Wait until a RNDIS Gadget device recognized by Windows<br/>
5. 等待RNDIS Gadget设备被Windows识别<br/>
 
 
[[File:Pu6_remark.png|600px]]<br/>
 
[[File:Pu6_remark.png|600px]]<br/>
 
<br>
 
<br>
6. 右击USB Ethernet网卡<br/>
+
6. Right click to set property of this USB Ethernet Card<br/>
7. 设置TCP/IPv4属性<br/>
+
7. Set property of TCP/IPv4<br/>
 
[[File:Pu7_remark.png|600px]]<br/>
 
[[File:Pu7_remark.png|600px]]<br/>
 
<br>
 
<br>
8. 启动UltraVnc Viewer<br/>
+
8. Start UltraVnc Viewer<br/>
9. 设置IP地址和端口号,点击Connect登陆<br>
+
9. Enter IP Address and Port number, then click "Connect"<br>
 
[[File:Vncone.png]]<br/>
 
[[File:Vncone.png]]<br/>
 
<br>
 
<br>
10. 输入用户名和密码root/root<br>
+
10. Enter user name and password(root/root)<br>
 
[[File:Vnctwo.png|600px]]<br/>
 
[[File:Vnctwo.png|600px]]<br/>
 
<br>
 
<br>
11. 设置WiFi和Blue tooth<br>
+
11. Setting of WiFi and Bluetooth<br>
 
[[File:Vncthree.png|600px]]<br/>
 
[[File:Vncthree.png|600px]]<br/>
 
<br>
 
<br>
 +
 
==手动安装Debian Stretch最小文件系统==
 
==手动安装Debian Stretch最小文件系统==

Revision as of 17:45, 25 August 2018

中文页面
Debian-stretch-1024x576.jpg

VNC Remote Login

Debian distribution pre-loaded with Innostick 6 has support of VNC Server. User can login to it through an VNC Viewer.

Pre-requirements

Procedures

1. Install UltraVnc Viewer on Windows host
2. Mount Jumper J1 on Innostick 6(Supply from Micro-USB cable)
3. Leave Jumper J2 open on Innostick 6(Normal Boot Mode)
4. Connect Micro-USB cable between Windows host and Innostick 6 P1
5. Wait until a RNDIS Gadget device recognized by Windows
Pu6 remark.png

6. Right click to set property of this USB Ethernet Card
7. Set property of TCP/IPv4
Pu7 remark.png

8. Start UltraVnc Viewer
9. Enter IP Address and Port number, then click "Connect"
Vncone.png

10. Enter user name and password(root/root)
Vnctwo.png

11. Setting of WiFi and Bluetooth
Vncthree.png

手动安装Debian Stretch最小文件系统