Difference between revisions of "Jetson/AGX Xavier Alternative II For Cloning"

From eLinux.org
Jump to: navigation, search
(text formatting)
(text formatting)
Line 1: Line 1:
First, stop disk at Xavier:
+
'''First, stop disk at Xavier:'''
  
 
echo u > /proc/sysrq-trigger
 
echo u > /proc/sysrq-trigger
  
Second,take raw image:
+
'''Second,take raw image:'''
  
 
dd if=/dev/mmcblk0p1 of=testimage.raw
 
dd if=/dev/mmcblk0p1 of=testimage.raw
 
+
''
Moreover, the image could be taken over the network e.g. using one of two methods below:
+
Moreover, the image could be taken over the network e.g. using one of two methods below:''
  
 
dd if=/dev/mmcblk0p1 | ssh user@hostpc dd of=/data/image.raw
 
dd if=/dev/mmcblk0p1 | ssh user@hostpc dd of=/data/image.raw
Line 15: Line 15:
 
''reciever:'' etcat -l -p <port> > your_image_file
 
''reciever:'' etcat -l -p <port> > your_image_file
  
Third, make sparseimage [at Host PC]
+
'''Third, make sparseimage [at Host PC]'''
  
 
./mksparse -v --fillpattern=0 ~/testimage.raw system.img
 
./mksparse -v --fillpattern=0 ~/testimage.raw system.img
  
Fourth: deploy the sparse image to other devices:
+
'''Fourth: deploy the sparse image to other devices:'''
  
 
sudo ./flash.sh -r jetson-Xavier mmcblk0p1
 
sudo ./flash.sh -r jetson-Xavier mmcblk0p1

Revision as of 17:12, 18 May 2019

First, stop disk at Xavier:

echo u > /proc/sysrq-trigger

Second,take raw image:

dd if=/dev/mmcblk0p1 of=testimage.raw Moreover, the image could be taken over the network e.g. using one of two methods below:

dd if=/dev/mmcblk0p1 | ssh user@hostpc dd of=/data/image.raw

sender: sudo dd if=/dev/mmcblk0p1 | netcat <ip_address> <port>

reciever: etcat -l -p <port> > your_image_file

Third, make sparseimage [at Host PC]

./mksparse -v --fillpattern=0 ~/testimage.raw system.img

Fourth: deploy the sparse image to other devices:

sudo ./flash.sh -r jetson-Xavier mmcblk0p1