Difference between revisions of "Jetson/AGX Xavier Alternative II For Cloning"

From eLinux.org
Jump to: navigation, search
m (spaces added)
m (formatting)
Line 15: Line 15:
 
''sender:'' sudo dd if=/dev/mmcblk0p1 | netcat <ip_address> <port>
 
''sender:'' sudo dd if=/dev/mmcblk0p1 | netcat <ip_address> <port>
  
''reciever:'' etcat -l -p <port> > your_image_file
+
''reciever:'' netcat -l -p <port> > your_image_file
 +
 
  
 
'''Third, make sparseimage [at Host PC]'''
 
'''Third, make sparseimage [at Host PC]'''

Revision as of 17:21, 18 May 2019

First, stop disk at Xavier:

echo u > /proc/sysrq-trigger

Second, take raw image:

dd if=/dev/mmcblk0p1 of=testimage.raw


Moreover, the image could be taken over the network e.g. using one of two methods below:''

dd if=/dev/mmcblk0p1 | ssh user@hostpc dd of=/data/image.raw

sender: sudo dd if=/dev/mmcblk0p1 | netcat <ip_address> <port>

reciever: netcat -l -p <port> > your_image_file


Third, make sparseimage [at Host PC]

./mksparse -v --fillpattern=0 ~/testimage.raw system.img

Fourth, deploy the sparse image to other devices:

sudo ./flash.sh -r jetson-Xavier mmcblk0p1