Difference between revisions of "Jetson/AGX Xavier Alternative II For Cloning"
< Jetson
m (→First, stop disk at Xavier as root:) |
m (→Second, take raw image:: 1->0 in mmcblk) |
||
(2 intermediate revisions by the same user not shown) | |||
Line 12: | Line 12: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | | dd if=/dev/mmcblk0p1 of=/path/testimage.raw | + | | ''remount sdcard writeable:''||mount --options remount,rw /dev/mmcblk0p1 |
+ | |- | ||
+ | | ''clone [in this example to sdcard]''||dd if=/dev/mmcblk0p1 of=/path/testimage.raw | ||
|} | |} | ||
Latest revision as of 02:35, 13 August 2020
Contents
First, stop disk at Xavier as root:
sudo su |
echo u > /proc/sysrq-trigger |
Second, take raw image:
remount sdcard writeable: | mount --options remount,rw /dev/mmcblk0p1 |
clone [in this example to sdcard] | dd if=/dev/mmcblk0p1 of=/path/testimage.raw |
Moreover, the image could be taken over the network e.g. using one of two methods below:
dd if=/dev/mmcblk0p1 | ssh user@hostpc dd of=/data/testimage.raw | |
sender: | sudo dd if=/dev/mmcblk0p1 | netcat <ip_address> <port> |
reciever: | netcat -l -p <port> > your_image_file |
Third, make sparseimage [at Host PC]
./mksparse -v --fillpattern=0 ~/testimage.raw system.img |
Fourth, deploy the sparse image to other devices:
sudo ./flash.sh -r jetson-xavier mmcblk0p1 |