Jetson/AGX Xavier Alternative II For Cloning

< Jetson
Revision as of 16:22, 18 May 2019 by AndreV (talk | contribs) (formatting)
Jump to: navigation, search

First, stop disk at Xavier:

echo u > /proc/sysrq-trigger

Second, take raw image:

dd if=/dev/mmcblk0p1 of=/path/testimage.raw

Moreover, the image could be taken over the network e.g. using one of two methods below:''

dd if=/dev/mmcblk0p1 | ssh user@hostpc dd of=/data/testimage.raw

sender: sudo dd if=/dev/mmcblk0p1 | netcat <ip_address> <port>

reciever: netcat -l -p <port> > your_image_file

Third, make sparseimage [at Host PC]

./mksparse -v --fillpattern=0 ~/testimage.raw system.img

Fourth, deploy the sparse image to other devices:

sudo ./ -r jetson-Xavier mmcblk0p1