First, stop disk at Xavier:
| echo u > /proc/sysrq-trigger
|
Second, take raw image:
| dd if=/dev/mmcblk0p1 of=/path/testimage.raw
|
Moreover, the image could be taken over the network e.g. using one of two methods below:''
|
dd if=/dev/mmcblk0p1 | ssh user@hostpc dd of=/data/testimage.raw
|
| sender: |
sudo dd if=/dev/mmcblk0p1 | netcat <ip_address> <port>
|
| reciever: |
netcat -l -p <port> > your_image_file
|
Third, make sparseimage [at Host PC]
| ./mksparse -v --fillpattern=0 ~/testimage.raw system.img
|
Fourth, deploy the sparse image to other devices:
| sudo ./flash.sh -r jetson-Xavier mmcblk0p1
|
