Difference between revisions of "Jetson/L4T/r32.6.x patches"
Line 29: | Line 29: | ||
[source code] source_sync.sh fails to download AGXI source code | [source code] source_sync.sh fails to download AGXI source code | ||
https://forums.developer.nvidia.com/t/jetpack-4-6-production-release-with-l4t-32-6-1/185596/5 | https://forums.developer.nvidia.com/t/jetpack-4-6-production-release-with-l4t-32-6-1/185596/5 | ||
+ | |||
+ | [system] nvpmodel.conf PM_CONFIG to configure the default power mode | ||
+ | https://forums.developer.nvidia.com/t/197985/13/ | ||
'''Multimedia''' | '''Multimedia''' | ||
[gstreamer]Memory leak in UDP streaming | [gstreamer]Memory leak in UDP streaming | ||
https://forums.developer.nvidia.com/t/175198/11 | https://forums.developer.nvidia.com/t/175198/11 |
Revision as of 19:15, 19 December 2021
OTA
[Image based] Image based OTA got error when no ethernet is available https://forums.developer.nvidia.com/t/image-based-over-the-air-update-question/186110/19 [BUP] BUP update fails for NX FAB=200 modules. https://forums.developer.nvidia.com/t/invalid-device-spec-generated-during-bootloader-update/195651
Camera
[VI-5] V4L2 timeout leads to NULL pointer dereference in kernel https://forums.developer.nvidia.com/t/187824/12/
[VI5] Disable ECC/CRC checking. https://forums.developer.nvidia.com/t/196126/9
[Multi-camera] patch to fix "Invalid sensor placement is set" failure. https://forums.developer.nvidia.com/t/184902/10/
Misc
[u-boot] fixes for TX2-NX failed to boot-up by loading dtb via Jetson-IO or FDT path. https://forums.developer.nvidia.com/t/188599/8/ [u-boot] revise offsets for TX2-NX to allows a disk-based DTB (via FDT in extlinux.conf) to be used with the current kernel image. https://forums.developer.nvidia.com/t/197775/10/
[flash] fixes for --no-flash command not works on Xavier-NX https://forums.developer.nvidia.com/t/190164/ [flash] Flash single partition with initrd flash https://forums.developer.nvidia.com/t/initrd-flash-single-partition-issue/197379/4 [source code] source_sync.sh fails to download AGXI source code https://forums.developer.nvidia.com/t/jetpack-4-6-production-release-with-l4t-32-6-1/185596/5
[system] nvpmodel.conf PM_CONFIG to configure the default power mode https://forums.developer.nvidia.com/t/197985/13/
Multimedia
[gstreamer]Memory leak in UDP streaming https://forums.developer.nvidia.com/t/175198/11