Jetson/xcb-lite
Summary
The XCB-Lite TX1/2 carrier board is designed by DCDZ. Supply more interfaces in a small dimension. Author's mail: zhang0801@139.com
Spec list
- MicroHDMI: HDMI type D
- eDP: support 30pin or 40pin eDP cable
- DSI: 40pin interface for connect LCD module
- LED: one power LED, one GPIO controlled LED.
- UART0,UART1,UART2, UART3: 5V or 3.3V TTL level UARTs
- CAN for TX2
- DMIC and DSPK for TX2
- DC12V PWR IN: DC 5.5V ~ 17V input
- Fan: Fan interface
- Key: four push button
- Micro USB: Micro USB-A/B
- USB 3.0: USB 3.0 expansion header same as the PC motherboard
- Gbe ethernet: expand the Gbe ethernet port by a little board width RJ45
- GPIO: ten 3.3V level GPIOs and two 1.8V GPIO, support expanding more GPIO
- Charger: battery charger board interface and perform the "Auto-Power-On"
- Auto-Power-On: support "Auto-Power-On".
- Audio: audio card expansion
- Micro SD: Molex microSD Memory Card Connector, Push-Push Type
- Touch: Touch screen or CAN bus expansion
- CSI-XX: CSI-AB, CSI-CD, CSI-EF
- Dimensions: 3.4" x 2.5" (87mm x 63mm) board
- Weight: 34.6g
Expansion board list
- ADAS cameras
- OV5640 M12 camera
- OV5693 camera
- IMX185 camera
- IMX274 camera
- HDMI to CSI2
- HDMI4K to CSI2
- SDI to CSI2
- CVBS to CSI2
- Sound card
- 6cam board
- GPIO board
- SPI board
- Dual CAN For TX2 ONLY
- DSPK board